You have no items in your shopping cart.
Knives
How would you like to shop?

Chef's Knives
Chopping, slicing, and mincing

Santoku Knives
Japanese all-purpose blade

Paring Knives
Peeling and detail work

Utility Knives
Sandwiches and small produce

Bread Knives
Crusty loaves and soft bread

Carving and Slicing
Roasts, ham, and brisket

Boning Knives
Removing meat from the bone

Knife Sets
Outfitting a kitchen or giving a gift
Shop All Shapes
Fillet, nakiri, yanagi, cleavers, steak, oyster, and every other shape we carry
European Makers
Professional and Commercial
Not sure where to start?
What will you cut most often?
What is your budget per knife?
Which edge style do you want?
All Knives
-
Minonokuni Take 7.1-inch (180mm) Kama-Usuba
With its sickle-shaped tip, the kama-usuba does what the square Kanto usuba cannot. The tip reaches into a vegetable for detailed carving and scoring, while the long, flat edge still handles push cuts and katsuramuki. This Kansai-style knife is sometimes called a kamagata usuba.At 180mm, it is easy to control on a home board and light enough for quick, repeated cuts without tiring the hand. Use the edge for slicing scallions, cucumbers and radishes, then turn to the tip to cut a crosshatch into a shiitake cap or shape a carrot into flowers for a garnish.
Take SteelWhite steel takes a very keen edge, and in the Take line it is good enough for professional use while staying less brittle than blue steel. The thin tip of a kama-usuba benefits from that extra tolerance. Experienced cooks can choose the Matsu 180mm kama-usuba, and beginners the Ume 180mm kama-usuba.The Take 210mm kama-usuba adds length. Left-handed cooks should see the Take 180mm left-handed kama-usuba. The kitchen knife shapes guide explains the usuba family. Learn More -
Minonokuni Take 8.3-inch (210mm) Usuba
The 210mm usuba is the size for steady vegetable prep. Its length takes a long daikon through katsuramuki without the sheet running off the blade, and its tall, flat face carries sliced vegetables neatly from the board to the pan.This is a Kanto-style usuba, square at the tip. Its single bevel and flat edge give the control needed for paper-thin sheets, delicate garnishes and precise cuts, and the blade passes through vegetables without cracking or bruising them. Keep the motion a straight push. A rocking cut wears the edge and leaves slices joined at the bottom.
Which Usuba to ChooseTake is the sweet spot of the three standard Minonokuni lines. Its white steel holds an edge well enough for professional use and is less brittle than blue steel, so it suits cooks who are confident with knives but newer to single-bevel blades. The Matsu 210mm usuba is the blue steel option, and the Ume 210mm usuba is the most forgiving.For a shorter knife, see the Take 180mm usuba. The Take 210mm kama-usuba is the pointed Kansai form. The knife shapes guide covers both shapes. Learn More$245.00 -
Minonokuni Take 7.1-inch (180mm) Left-Handed Usuba
Katsuramuki and fine julienne depend on the bevel being on the correct side of the blade. For a left-handed cook, this Take 180mm usuba puts it on the left face, so a daikon unrolls into an even sheet and each push cut falls straight.The usuba is a push-cutting knife. Its flat edge meets the board along the full length, so slices of cucumber or carrot separate completely without rocking. That flat profile also lets the cook cut vegetables into the very fine needle threads used for garnish.
A Practical First UsubaWe stock left-handed knives in all three standard lines. Take is the middle line, with white steel that is ready for professional work and less brittle than blue steel. It suits a left-handed cook who wants to learn the usuba without the more delicate edge of Matsu. The Ume 180mm left-handed usuba is the most forgiving and easiest to sharpen.The right-handed version is the Take 180mm usuba. For decorative work with a point, see the Take 180mm left-handed kama-usuba. The knife shapes guide describes the usuba. Learn More -
Minonokuni Take 7.1-inch (180mm) Usuba
Thin and square at the tip, the usuba is the Japanese knife for vegetables. This 180mm Take usuba is the size we suggest for a home kitchen or for a cook learning the shape, and it is ground flat enough to make very precise cuts with clean lines.Two techniques define the knife. In katsuramuki, a section of peeled daikon or cucumber is rotated against the edge to unroll a long, translucent sheet. In push cutting, the blade goes straight down and slightly forward through carrots and scallions, separating each slice fully because the whole edge meets the board.
Choosing Between the LinesTake uses white steel, which is less brittle than the blue steel in the Matsu 180mm usuba and still good enough for professional use. That makes it a sound choice for a cook who is not yet an expert with single-bevel blades. The Ume 180mm usuba is the most forgiving if sharpening practice is part of the plan.The Take 210mm usuba is longer, and the Take 180mm kama-usuba adds a pointed tip for garnish work. Left-handed cooks should see the Take 180mm left-handed usuba. The knife shapes guide covers the usuba and nakiri. Learn More$195.00 -
Minonokuni Take 9.4-inch (240mm) Left-Handed Yanagi
Made for left-handed chefs, this Take 240mm yanagi is ground with its bevel on the left face, so it slices sushi and sashimi as cleanly in the left hand as a standard yanagi does in the right. We keep it in stock.At 240mm, it is long enough for a saku of tuna or a full side of salmon to be cut in one stroke, which gives each slice a smooth surface. The knife is still short enough for an ordinary home board. For a cook who will slice in both a restaurant and a home kitchen, this length covers both.
SteelThe white steel in the Take line is good enough for professional use and less brittle than blue steel. That makes it a practical choice for a left-handed cook who is newer to single-bevel knives, where an awkward cut is more likely. The Matsu 240mm left-handed yanagiba is the blue steel option for experienced hands, and the Ume 240mm left-handed yanagi is the most forgiving.Other left-handed Take lengths are the 210mm and 270mm. See our kitchen knife shapes guide for an overview of slicers. Learn More$275.00 -
Minonokuni Take 9.4-inch (240mm) Yanagiba
For a cook who wants one yanagiba that can serve at home and in a professional kitchen, 240mm is the length to choose. It slices a full saku of tuna or a salmon fillet in a single pull, but it is not so long that it becomes awkward on an ordinary board.The Take line is the one we point a cook toward when in doubt. White steel takes an edge fine enough for sashimi and is less brittle than blue steel, so a slip of technique is less likely to cost a chip in the edge. It is the sweet spot between the Matsu 240mm yanagiba, for experienced hands, and the Ume 240mm yanagiba, for a first knife.
Using the LengthPlace the heel at the far edge of the fish and draw the blade toward you in one smooth motion, letting the tip finish the cut. The slice should come away with a bright, unbroken surface. If it needs a second stroke, the cut was too short or too slow.Other lengths are the 210mm and the 270mm. A left-handed cook should choose the Take 240mm left-handed yanagi. The knife shapes guide has more on Japanese slicers. Learn More$200.00 -
Minonokuni Take 8.3-inch (210mm) Left-Handed Yanagi
A left-handed sushi cook needs the bevel on the left side of the blade to slice cleanly, and this Take 210mm yanagi has it. Held in the left hand, the edge draws through the fish and steers the slice away from the block, the same way a right-handed yanagi works in the right hand.The 210mm length fits a home board and handles sashimi from salmon, tuna and yellowtail fillets. Expect a well-ground, flat blade that is sharp when it arrives. Like any single-bevel knife, it performs best once the cook has learned to maintain the edge on waterstones.
Choosing a Line for Left-Handed UseTake is the middle of our three standard lines, and we stock left-handed models in all three. Take’s white steel is less brittle than the blue steel Matsu 210mm left-handed yanagiba but holds an edge well enough for a professional kitchen. The Ume 210mm left-handed yanagi is the most forgiving and the easiest to learn to sharpen.For a longer stroke, see the Take 240mm left-handed yanagi. The right-handed version is the Take 210mm yanagiba. Our knife shapes guide explains the yanagi in detail. Learn More -
Minonokuni Take 8.3-inch (210mm) Yanagiba
A 210mm yanagiba is a comfortable length for slicing sashimi on a home cutting board, and the Take version gives a first-time sushi cook a knife that will grow with their skills. The blade is ground very flat, and the long, narrow edge cuts a block of fish in a single drawing stroke.Draw the knife toward you from the heel, keeping the pressure light. The single bevel and hollow back let each slice fall away cleanly instead of clinging to the blade. Short fillets of salmon or yellowtail are well within reach of this length.
Take or Matsu?The Take line uses white steel, which takes a very fine edge and comes back quickly on a waterstone. It is less brittle than the blue steel of the Matsu 210mm yanagiba, and so better suited to a cook who is still learning both the slicing stroke and how to sharpen a single bevel. It is good enough for professional use, which is why we call Take the sweet spot.Longer blocks of fish are easier with the Take 240mm yanagiba. Left-handed cooks should see the Take 210mm left-handed yanagi. The knife shapes guide covers the yanagiba. Learn More -
Minonokuni Take 7.7-inch (195mm) Deba
The 195mm is the largest deba in the Take line, built for large saltwater fish and big freshwater fish. Its mass is the point. A heavy blade drops through the head and collar of a large fish with little effort from the cook, and the long edge keeps the cut straight along a wide frame.That weight makes it slower on small fish, so it suits a cook who regularly handles large ones, such as a restaurant buying whole fish or an angler cleaning a large catch. For mixed work, the Take 180mm deba or Take 165mm deba is easier to manoeuvre.
Steel ChoiceWhite steel gives the Take line an edge that holds up in a professional kitchen while staying less brittle than blue steel. That combination is why we call Take the sweet spot of the Minonokuni range. A cook who wants the same size in the most forgiving steel can look at the Ume 195mm deba.Left-handed cooks will find the Take 180mm left-handed deba the largest left-handed option in the line. For more on choosing a deba, see the guide to knife shapes. Learn More$265.00 -
Minonokuni Take 7.1-inch (180mm) Left-Handed Deba
This is a left-handed deba in the true sense. Forging and grinding put the single bevel on the left face, rather than reshaping a right-handed blade, so a left-handed cook gets the same control along the frame that the knife was designed to give. At 180mm, it is the largest left-handed deba in the Take line.The size is meant for large fish such as salmon and big snapper. The heavy heel splits heads and cuts collars, and the long edge follows the backbone in fewer passes. On poultry, it breaks down a whole bird with room to spare.
A Line for Learning and for WorkTake is the line we suggest for cooks who want a knife good enough for professional work but less brittle than blue steel. For a left-handed cook still learning to sharpen a single bevel, the Ume 180mm left-handed deba is more forgiving still.Shorter left-handed sizes are the Take 165mm and Take 150mm. The right-handed version is the Take 180mm deba. The knife shapes guide explains where the deba fits.Each Take knife is forged by hand. Expect small hammer marks, a slightly uneven finish on the iron and other signs of handwork, none of which affect the edge. Learn More
