Knives

Items 1 to 10 of 27 total

per page

Page:
  1. 1
  2. 2
  3. 3
  • Suncraft Senzo Clad 6.5-inch (165mm) Santoku

    A santoku is the Japanese all-purpose knife, and the 6.5-inch Senzo Clad santoku puts that shape on a three-layer blade with an AUS10 high-carbon stainless center. The flatter edge and rounded tip favor straight-down chopping and forward push cuts, so it moves quickly through a head of broccoli or a chicken breast.The tall blade gives knuckle clearance and lifts chopped food to the pan. Its size suits a standard home cutting board, and the brown handle feels secure in a wet hand. Suncraft notes the wave pattern that appears near the edge, a feature of clad steel that gives the blade its Japanese character. For a home cook choosing a first Japanese knife, it is a forgiving place to start, since the blade is very sharp and responds well to honing, which makes it easy to keep sharp, and it makes a practical gift for a new apartment or a wedding.
    Santoku or Bunka?The Senzo Clad Bunka Knife adds an angled, pointed tip. Learn More
  • Suncraft Senzo Clad 8.3-inch (210mm) Gyuto

    Suncraft describes the Senzo Clad series as an excellent balance of specs and price, and the 8.3-inch gyuto is its all-purpose chef’s knife. The blade is three layers of steel with AUS10, a high-carbon stainless steel, at the center, so the hard middle layer forms a keen edge and the outer layers add toughness. The edge responds well to honing, so a few strokes on a steel keep it sharp between sharpenings.At 210mm, the gyuto is long enough to rock through a pile of herbs and short enough to control on a home cutting board. The thin Japanese edge slides through onions and carrots with less force than a thicker Western blade. A brown pakkawood handle and stainless steel bolster give it a familiar, comfortable grip, and Suncraft credits the general knife shape for its ease of use. It is an approachable first Japanese chef’s knife for home cooks and a dependable workhorse for professionals who want a sharp gyuto without a premium price.
    Senzo Clad Gyuto LengthsThe 9.4-inch Gyuto adds reach for volume prep. Learn More
  • Suncraft Senzo Clad 9.4-inch (240mm) Slicer

    A long, narrow slicer carves cooked meats and portions fish in single, smooth strokes, and the Senzo Clad slicer gives that job 9.4 inches of edge. Drawing the blade through a brisket flat or a side of salmon in one pass keeps every slice even and intact.A hard center layer holds the fine bite that clean slicing requires, so thin slices come away with smooth faces, and the blade responds well to honing, so it is easy to keep that edge between carving sessions. It carves a holiday turkey or a prime rib at the table and slices smoked meats for a barbecue spread, and it handles delicate fish, wafer-thin slices of gravlax and charcuterie with the same precision. Barbecue cooks and anyone who hosts holiday dinners will find it a precise, good-looking carving knife.
    Everyday PartnerThe 8.3-inch Gyuto handles daily prep. Learn More
  • Suncraft Senzo Clad 6.5-inch (165mm) Boning Knife

    A boning knife has a narrow, pointed blade that follows bones and joints, and this Senzo Clad version brings a Japanese edge to that work. It separates chicken thighs at the joint, trims fat from a pork shoulder and lifts silver skin from a tenderloin in a single strip.Work with the tip along the bone in short strokes, and keep the meat cold so it holds its shape. Home cooks who buy whole chickens and hunters processing game will get steady use from it. Avoid cutting through bone itself, which can chip a hard Japanese edge.
    Flexible OptionFor fish, see the Senzo Clad Flexible Boning Knife. Learn More
  • Suncraft Senzo Clad 6.7-inch (170mm) Nakiri

    The nakiri is the Japanese vegetable knife, with a straight edge and a squared tip that meet the board along their full length. Each push cut separates a carrot or a stack of scallions completely, without the rocking motion that crushes delicate produce.The Senzo Clad version pairs its clad AUS10 blade with a tall face that carries cut vegetables to the pan. Because it has no point, it is a forgiving knife for cooks who prep a lot of produce, and the edge responds well to honing, which makes it easy to keep sharp through a season of vegetables. Vegetarian cooks and anyone who fills a wok with sliced vegetables will find it faster than a chef’s knife for that work.
    Pair It WithThe 8.3-inch Gyuto handles protein and general prep. Learn More
  • Suncraft Senzo Clad 6.7-inch (170mm) Flexible Boning Knife

    Suncraft lists this 6.7-inch Senzo Clad knife as a flexible boning knife, and the bend in the blade makes it the series’ knife for fish. It follows the curve of a fish’s backbone to lift a fillet cleanly, then slides between skin and flesh to remove the skin in one pass.The same flexibility helps trim fat and membrane from poultry and pork without gouging the meat. Anglers cleaning their catch and cooks who buy whole fish will find it a precise, easy-to-control tool. Its brown pakkawood handle stays secure when your hands are wet from rinsing fish.
    Stiff OptionFor poultry and red meat, see the Senzo Clad Boning Knife. Learn More
  • Suncraft Senzo Clad 9.4-inch (240mm) Gyuto

    The 9.4-inch gyuto is the longest chef’s knife in the Senzo Clad series, made for large boards and big prep lists. Halving a head of cabbage or slicing a roast takes fewer strokes with this much edge, and the long, gently curved blade rocks smoothly through herbs.Professional cooks who work a long station and home cooks who batch-cook for the week will appreciate the reach. Because the AUS10 center layer is hard and the cladding is tougher, the long blade holds a keen edge without feeling brittle, and it responds well to honing, so it is easy to keep sharp. A pakkawood handle and steel bolster balance the extra length, and the clad wave pattern near the edge gives the knife a distinctly Japanese look. Cooks with large hands may find this length more comfortable than a standard gyuto.
    A Shorter GyutoThe 8.3-inch Gyuto is easier to control on a small board. Learn More
  • Suncraft Senzo Clad 6.5-inch (165mm) Bunka Knife

    Suncraft’s catalog explains the bunka as an old-fashioned multipurpose knife whose design feature is the angled tip of the blade, the characteristic K-tip, or reverse tanto, profile. The Senzo Clad bunka keeps a flat edge for vegetables and adds that pointed tip for scoring and fine mincing.At 6.5 inches, it is a compact all-rounder that handles an onion or a chicken thigh equally well. Its clad blade takes a keen edge at the AUS10 center, and the pakkawood handle sits comfortably in a pinch grip. Shoppers looking for a Suncraft bunka will find it a capable, well-priced introduction to the shape, and its angular profile makes it a distinctive gift for an enthusiast who already owns a gyuto.
    Bunka or Nakiri?The Senzo Clad Nakiri has a squared tip for vegetables only. Learn More
  • Suncraft Senzo Black 6.6-inch (167mm) Santoku

    A santoku is the Japanese all-purpose knife, and the 6.6-inch Senzo Black santoku sets that shape in black Damascus steel over a VG10 core. Its flatter edge and rounded tip favor straight-down chopping and forward push cuts through vegetables and boneless meat, and the edge holds exceptionally well without frequent honing.A tsuchime, or hammered, texture covers the blade face, and the tall blade gives knuckle clearance on the board. Suncraft finishes each blade with a dark wave pattern, so no two knives look alike. Its octagonal pakkawood handle tapers toward the blade, is set off by a white ring and fits comfortably in either hand. It is a versatile primary knife for a home cook, and an eye-catching gift for anyone who enjoys Japanese knives. A santoku of this length also stores neatly on a magnetic strip.
    A Smaller SantokuThe 5.6-inch Small Santoku suits small boards and light prep. Learn More
  • Suncraft Senzo Black 7.9-inch (200mm) Chef's Knife

    The Senzo Black series pairs a VG10 core with Damascus cladding that Suncraft gives a special black treatment, bringing out a deep, dark wave pattern that differs on every blade. The 7.9-inch chef’s knife is the series’ all-purpose knife, sized for everything from mincing herbs to slicing a pork loin. It pairs the time-honored Western chef’s knife shape with Japanese craftsmanship, and its profile allows a very smooth rocking motion.VG10 is a stainless steel known for taking a keen edge and holding it, and the hammered tsuchime texture on the blade face adds grip and visual depth. The octagonal handle, a traditional Japanese shape, combines brown and black pakkawood with a white fiber ring at the front, and its tapered wa shape is especially comfortable in a pinch grip or a traditional Japanese grip. At 200mm, it is a comfortable length for a home cutting board. Collectors choose this series for its looks, and the thin edge makes the knife as practical as it is striking, which also makes it a memorable gift.
    Senzo Black OptionsFor a flatter profile, see the 6.6-inch Santoku or the 7.9-inch Bunka Knife. Learn More

Items 1 to 10 of 27 total

per page

Page:
  1. 1
  2. 2
  3. 3