Masahiro Shiro-Ko 8.25-inch (210mm) Yanagiba

The 210mm Shiro-Ko yanagiba is the compact sashimi knife in the line. At about 110g it is light and agile, which suits small fillets, crudo, garnish work and a home cutting board, while still finishing most cuts on medium fish in a single pull.

White #2 steel takes an extremely sharp edge, and the single bevel and hollow-ground back leave a smooth cut face and let each slice fall away cleanly. The buffalo horn ferrule and ho wood handle are the Saijo grade’s finish. Because the blade is short and light, it is also a sensible first yanagiba for a cook learning traditional sashimi slicing. It is a slicing knife for boneless fish and should stay off bone. Dry the blade immediately after use and oil it lightly before storing it.


Choosing a yanagiba

For longer strokes, see the Shiro-Ko 240mm Yanagiba and 270mm Yanagiba. For Yellow Paper steel at this length, compare the Traditional Carbon 210mm Yanagi. The Masahiro 210mm Yanagi Saya fits this knife.

SKU: MH15418

Availability: In stock

$216.00
  • Details

    Specifications

    • Series: Masahiro Shiro-Ko (Saijo)
    • Type: Yanagiba
    • Blade length: 8.25 inches (210mm)
    • Edge: Single bevel with a hollow-ground (urasuki) back, for right-handed use
    • Steel: White Paper #2 (Shirogami) carbon steel, 1.1% carbon; not stainless
    • Hardness: HRC 60
    • Finish: Kasumi
    • Handle: Japanese magnolia (ho) wood with a water buffalo horn ferrule
    • Matching saya: Masahiro 210mm Yanagi Saya
    • Weight: About 110g (3.9 ounces)
    • Item number: 15418
    • Country of manufacture: Japan

    Masahiro Single-Bevel Knives and Sayas


    Tips for Best Results

    Slice in one long pulling stroke from heel to tip, using the full length of the blade, rather than sawing. A yanagi is for boneless fish and should not meet bone. This is a single-bevel knife. Sharpen the bevel side at the angle it already has, then lay the back flat on the stone and remove the burr with a few light strokes. Keep the back flat; rounding it over spoils the cut.


    Care

    This blade is carbon steel and will rust if it is left wet. Wipe it dry as you work, especially after cutting acidic foods, and wash and dry it by hand when you finish. A gray or blue-gray patina will form with use; it is normal and helps protect the steel. Do not put the knife in a dishwasher. Oil the blade lightly if it will be stored for a while. Our guide to the care and maintenance of carbon steel knives covers patina, rust removal and storage.

    Additional Info

    Blade Length (Inches) 8.25 in.
    Blade Length (mm) 210 mm
    Blade Width (inches) No
    Grind Urasuki Chisel
    Steel Type White #2 Carbon Steel
    Rockwell Hardness 60
    Stainless No
    Handle Material Japanese Magnolia (Ho) Wood with a Water Buffalo Horn Ferrule
    Spine Thickness (mm) No
    Brand Masahiro
    Country of Manufacture Japan
    SKU MH15418
    Manufacturer's Part Number 15418
    Manufacturer's Suggested Retail Price No

    Write Your Own Review

    You're reviewing: Masahiro Shiro-Ko 8.25-inch (210mm) Yanagiba