Masahiro Shiro-Ko 5.9-inch (150mm) Deba

The 150mm Shiro-Ko deba is a compact fish butchery knife in White #2 steel, the purest type of carbon steel and one that takes an extremely sharp edge. It suits small and medium fish such as mackerel, trout, sea bream and bass: taking off heads, cutting through pin bones and filleting along the frame.

Like every deba, the blade is thick at the spine, which gives it the weight to work through heads and collars, and the single-bevel edge with a hollow-ground back leaves clean fillets. The length is easier to control than a 165 or 180mm deba, which makes it a good first deba for a home cook learning to break down whole fish. A water buffalo horn ferrule and a light ho wood handle complete the knife. As with all carbon steel, dry it after each use.


Choosing a Shiro-Ko deba

For medium fish, see the Shiro-Ko 165mm Deba; for salmon and larger fish, the Shiro-Ko 180mm Deba. For Yellow Paper steel at a smaller size, compare the Traditional Carbon 135mm Deba. The Masahiro 150mm Deba Saya fits this knife.

SKU: MH15405

Availability: In stock

$215.00
  • Details

    Specifications

    • Series: Masahiro Shiro-Ko (Saijo)
    • Type: Deba
    • Blade length: 5.9 inches (150mm)
    • Edge: Single bevel with a hollow-ground (urasuki) back, for right-handed use
    • Steel: White Paper #2 (Shirogami) carbon steel, 1.1% carbon; not stainless
    • Hardness: HRC 60
    • Finish: Kasumi
    • Handle: Japanese magnolia (ho) wood with a water buffalo horn ferrule
    • Matching saya: Masahiro 150mm Deba Saya
    • Weight: 235g (8.3 ounces)
    • Item number: 15405
    • Country of manufacture: Japan

    Masahiro Single-Bevel Knives and Sayas


    Tips for Best Results

    Use the heel and spine for heads and collars and the tip for filleting along the frame. The deba handles fish bones and small poultry joints; keep it off large bones and frozen food. This is a single-bevel knife. Sharpen the bevel side at the angle it already has, then lay the back flat on the stone and remove the burr with a few light strokes. Keep the back flat; rounding it over spoils the cut.


    Care

    This blade is carbon steel and will rust if it is left wet. Wipe it dry as you work, especially after cutting acidic foods, and wash and dry it by hand when you finish. A gray or blue-gray patina will form with use; it is normal and helps protect the steel. Do not put the knife in a dishwasher. Oil the blade lightly if it will be stored for a while. Our guide to the care and maintenance of carbon steel knives covers patina, rust removal and storage.

    Additional Info

    Blade Length (Inches) 5.9 in.
    Blade Length (mm) 150 mm
    Blade Width (inches) No
    Grind Urasuki Chisel
    Steel Type White #2 Carbon Steel
    Rockwell Hardness 60
    Stainless No
    Handle Material Japanese Magnolia (Ho) Wood with a Water Buffalo Horn Ferrule
    Spine Thickness (mm) No
    Brand Masahiro
    Country of Manufacture Japan
    SKU MH15405
    Manufacturer's Part Number 15405
    Manufacturer's Suggested Retail Price No

    Write Your Own Review

    You're reviewing: Masahiro Shiro-Ko 5.9-inch (150mm) Deba