Knives

Items 761 to 770 of 1489 total

per page

Page:
  1. 75
  2. 76
  3. 77
  4. 78
  5. 79
  • F. Dick ErgoGrip 12-inch Large Butcher Knife

    Heavy butcher work, trimming fat and breaking down primal cuts are the jobs for this 12-inch ErgoGrip knife. The long blade reaches across a full loin or round and finishes each cut in one stroke.As a block knife, it has a wide blade that holds a straight line and keeps knuckles clear of the board. The length adds momentum to each stroke, which helps on dense or fatty cuts. Hunters processing large game use it for the same separations a meat plant makes.The long blade also makes it a capable slicer for whole briskets and large hams. A cutter can finish a wide slice without sawing, so the cut face stays clean and even. The broad face then carries the slice away from the board.The 14-inch ErgoGrip butcher knife adds two more inches for the largest primals. At the same 12-inch length, the ErgoGrip 12-inch butcher knife has a different blade profile, and the 12-inch scimitar is better for portioning steaks. Learn More
  • F. Dick ErgoGrip 14-inch Butcher Knife

    The longest butcher knife in the ErgoGrip range, this 14-inch ErgoGrip butcher knife is for trimming fat and breaking down whole primal cuts where reach matters more than nimbleness.Fourteen inches of edge crosses the full width of a beef side or a whole brisket, so the cutter can separate it without restarting the stroke. The wide blade adds stiffness and a broad face for moving large pieces. The ErgoGrip handle has a pronounced guard and a wide thumb rest for a secure hold on a long knife.The long edge also turns large roasts and briskets into even slices without sawing.For most counter work, the 12-inch ErgoGrip large butcher knife or 12-inch butcher knife is easier to manage. Large seafood such as tuna can also be broken down with the 12-inch bull nose butcher knife. A knife this long belongs in a F. Dick Knife Scabbard with Belt when not in use. Learn More
  • F. Dick MasterGrip 5-inch Curved Semi-Flexible Boning Knife

    Dismantling poultry and taking meat cleanly from the bone are the jobs this 5-inch MasterGrip knife is built for. The curved semi-flexible blade gives slightly as it follows the frame, and it holds up to steady production use. It is one of the most efficient poultry knives we sell.MasterGrip handles have an open end and a reduced front guard, a design F. Dick shaped through practical tests with professional cutters. Without a closed butt, the hand can choke up for fine work or slide back for a longer pull. The orange color stands out on a white cutting board or in the field.The 5-inch length keeps the tip close for wing and thigh joints, and the semi-flex blade lifts breast meat from the keel without tearing it.The 6-inch MasterGrip curved semi-flexible boning knife adds reach for turkey and pork. For harder joint work, the MasterGrip 5-inch curved stiff boning knife is firmer. If a closed handle with a thumb rest suits the cutter better, the ErgoGrip 5-inch semi-flexible boning knife is the counterpart. Learn More
  • F. Dick MasterGrip 6-inch Curved Semi-Flexible Boning Knife

    Six inches of curved, semi-flexible blade give this MasterGrip knife the reach for turkey, duck and pork loin while keeping the give that poultry work needs. It holds up to the repetition of a processing line. We count it among the most efficient poultry knives we sell.The open MasterGrip handle has no closed butt and only a reduced finger guard at the front. That lets the cutter grip it in several ways during a shift and keeps the hand relaxed. The blade bends enough to follow the bone and keeps enough spine to cut through a joint.The longer blade draws along a turkey breast or a pork loin in one pass. For processors who work several species in a day, that range saves a change of knives.For small birds, the MasterGrip 5-inch semi-flexible boning knife is quicker. The ExpertGrip 2K 6-inch curved semi-flexible boning knife carries a similar blade on a cushioned closed handle. The table below compares the ExpertGrip and MasterGrip boning range, and our kitchen knife shapes guide explains the profiles. Learn More
  • F. Dick MasterGrip 5-inch Curved Stiff Boning Knife

    A bright orange handle is easy to find in a deer camp or on a dark cutting floor, which suits hunters as well as plant crews. The 5-inch curved stiff blade takes wings and legs off poultry and works around the joints of game.MasterGrip was developed for daily, concentrated work in the meat industry. The handle is open at the back and has a reduced finger guard, so the hand can slide to whatever position the cut needs, and its shape suits all hand sizes. A stiff spine and curved edge give leverage at the joint and a long draw along the bone.For more give on poultry, choose the MasterGrip 5-inch curved semi-flexible boning knife or its 6-inch version. Hunters who want a full field kit can look at the Master Grip 3 Piece Field Dressing Kit. The ExpertGrip 2K 5-inch curved stiff boning knife offers the same blade style on a soft-shell handle. Learn More
  • F. Dick ErgoGrip 5-inch Straight Flexible Boning Knife

    A narrow, straight blade that flexes under light pressure makes this knife a good choice for trimming silver skin from a tenderloin, filleting smaller fish and working around the bones of a pork butt. The 5-inch length keeps the tip close to the hand for control.Flex lets the edge ride along a bone or under a membrane and lift it away in one pass, which saves trim. The straight profile keeps the full edge in contact on flat surfaces, a help on fish frames and on the flat side of a loin. For meat processing that alternates between trimming and portioning, the ErgoGrip handle stays secure when it is wet and greasy.Flexible blades need a lighter hand than stiff ones, so let the edge do the work and guide it with steady pressure rather than force.Choose this knife when finesse matters more than force. If the cut involves prying at joints, a stiff blade such as the 5-inch straight stiff boning knife holds its line better. The 5-inch curved flexible boning knife bends the same way but has an upswept edge that some cutters prefer for drawing along rounded bones. Learn More
  • F. Dick ErgoGrip 5-inch Curved Flexible Boning Knife

    This curved, flexible 5-inch blade handles the varied work of breaking down a whole bird or a pork shoulder. It removes skin, cuts through joints and traces along rib and thigh bones without much force.The upswept curve gives a longer edge than a straight blade of the same length, so each draw cuts more. Flex lets that edge bend around rounded bones and stay in contact, which leaves less meat behind. On fish, the same combination lifts a fillet from the frame in a single motion.For poultry, the 5-inch length keeps the tip close to the hand during the many short cuts around the hip and shoulder joints.The curved flexible blade also comes in a 6-inch length for larger birds and pork loins. Cutters who want more backbone for joints choose the 5-inch curved stiff boning knife, and those who want something between the two pick the 5-inch semi-flexible boning knife. More on boning blade shapes is in our guide to kitchen knife shapes. Learn More
  • F. Dick ErgoGrip 6-inch Curved Flexible Boning Knife

    Six inches is long enough to make single-pass cuts along a pork loin or a leg of lamb and short enough to dismantle a chicken without the tip getting in the way. This curved, flexible ErgoGrip blade covers that range of work.Flex is the reason to choose it. The blade bends to follow bones and joints, so the edge stays close and the yield stays high, and it slides under silver skin to lift it off a tenderloin in a long strip. The same give makes it capable on fish, where the blade has to ride over the rib bones.On a chicken, the curve lets the cutter draw around the thigh bone in one motion and lift the meat in a single piece.A black-handled version is available for color-coded kitchens. The 5-inch curved flexible boning knife is quicker on small birds, and the 6-inch curved stiff boning knife is the better choice when the work involves forcing joints. A 6-inch semi-flexible blade sits between the two. Learn More
  • F. Dick ErgoGrip 6-inch Curved Flexible Boning Knife, Black Handle

    This black-handled 6-inch flexible boning knife fills the same role as F. Dick’s standard version for kitchens and plants that reserve black for a particular product or station. Chicken breakdown is where it does its best work, cutting wings and legs repeatedly through a long shift.The curved blade bends under pressure, which lets it trace the keel and thigh bones closely and lift meat cleanly. It is nimble enough to fillet a fish when the station calls for it. A dark handle also hides staining that light colors show, which some home butchers prefer.The 6-inch length gives one-pass cuts along a pork loin or a lamb leg when the station moves on from poultry.If color is not a requirement, the standard 6-inch curved flexible boning knife carries the same blade. For more backbone, the 6-inch semi-flexible boning knife or 6-inch curved stiff boning knife gives up some flex in exchange for control at the joints. Our kitchen knife shapes guide explains the difference. Learn More
  • F. Dick ErgoGrip 5-inch Semi-Flexible Boning Knife

    Semi-flexible blades sit between the stiff and flexible ErgoGrip boning knives. At 5 inches, this one has the length and give that poultry work calls for, and it separates wings and legs and then fillets the breast meat from the keel bone.A semi-flex blade bends enough to follow the curve of a carcass but keeps enough spine to push through a joint. That balance makes it a sensible first boning knife for a processor or a home butcher who handles chicken, duck and rabbit and does not want to switch knives between tasks.Its 5-inch length keeps the tip within easy reach of the fingers, which helps when cutting the small joints of a wing or a rabbit leg.For whole turkeys or larger cuts, the 6-inch semi-flexible boning knife adds an inch of reach. If the work leans toward joints and cartilage, a stiff blade such as the 5-inch curved stiff boning knife is the better tool, and for skinning and silver skin the 5-inch curved flexible boning knife bends further. Learn More

Items 761 to 770 of 1489 total

per page

Page:
  1. 75
  2. 76
  3. 77
  4. 78
  5. 79