You have no items in your shopping cart.
Knives
How would you like to shop?

Chef's Knives
Chopping, slicing, and mincing

Santoku Knives
Japanese all-purpose blade

Paring Knives
Peeling and detail work

Utility Knives
Sandwiches and small produce

Bread Knives
Crusty loaves and soft bread

Carving and Slicing
Roasts, ham, and brisket

Boning Knives
Removing meat from the bone

Knife Sets
Outfitting a kitchen or giving a gift
Shop All Shapes
Fillet, nakiri, yanagi, cleavers, steak, oyster, and every other shape we carry
European Makers
Professional and Commercial
Not sure where to start?
What will you cut most often?
What is your budget per knife?
Which edge style do you want?
All Knives
-
Minonokuni Ume 7.1-inch (180mm) Deba
Larger fish need a larger deba, and the 180mm Ume gives a newer cook the weight to take on salmon, striped bass and big snapper. The knife’s mass and thick spine supply the force for heavy cuts through heads and collars, so the cook can concentrate on control.The single-bevel edge runs along the bone with minimal damage to the fish. Take the fillet off in long strokes from head to tail, keeping the blade flat to the frame, then trim the rib bones with the tip.
A Forgiving SteelUme is the most forgiving of the three standard Minonokuni lines. Its carbon steel is less likely to chip than the harder white steel of Take or the blue steel of Matsu, which matters on a heavy knife that meets bone on every fish. It is also the easiest of the three to bring back to sharpness on a stone.The Ume 165mm deba is easier to handle on smaller fish, and the Ume 195mm deba is the largest. Left-handed cooks can order the Ume 180mm left-handed deba. A cook ready for a harder edge can compare the Take 180mm deba. The guide to knife shapes covers the deba. Learn More$110.00 -
Minonokuni Ume 6.5-inch (165mm) Left-Handed Deba
A left-handed cook learning Japanese fish butchery needs a knife ground for the left hand, and this Ume 165mm deba is one. Its single bevel is on the left face, so the edge stays against the backbone as the fillet comes away.The heavy blade breaks down whole fish and poultry, cleaving fillets from the bone and cutting through heads and collars. The size suits medium fish such as salmon, sea bass and snapper. A cook who mainly handles small fish may find the left-handed Take 150mm easier to manoeuvre.
Why Start with UmeThe Ume line uses yellow paper steel. It is the softest of the steels in our three standard lines, which makes it the most forgiving of mistakes and the easiest to sharpen. For a left-handed cook working out how a single bevel behaves, that is a real advantage. When the time comes for a harder edge, the Take 165mm left-handed deba is the step up.The right-handed version is the Ume 165mm deba, and the Ume 180mm left-handed deba is larger. The knife shapes guide covers the deba. Learn More -
Minonokuni Ume 6.5-inch (165mm) Deba
The 165mm is the deba size that does a little of everything. It is heavy enough to take the head off a medium salmon and nimble enough to fillet a mackerel, and it breaks down a whole chicken without trouble. In the Ume line, it is our suggestion for a cook who wants one deba to learn on.The thick spine and substantial weight give leverage through fish collars and joints, while the single bevel keeps the forward edge close to the bone. Cutting along the frame rather than across it, the cook can take clean fillets with little waste.
Ume, Take or Matsu?The three standard lines are not a simple ranking. Each suits a different cook. Ume is the most forgiving and the best for learning to sharpen. The Take 165mm deba is the sweet spot for cooks ready for a harder edge, and the Matsu 165mm deba is for those already experienced with single-bevel knives.Left-handed cooks should choose the Ume 165mm left-handed deba. Smaller fish are easier with the Ume 150mm deba, and larger ones with the Ume 180mm deba. The knife shapes guide explains the deba. Learn More -
Minonokuni Ume 5.9-inch (150mm) Deba
For a cook who has never owned a deba, the Ume 150mm is where we suggest starting. The size suits trout, mackerel and other fish that fit on a home cutting board, and the Ume line is the most forgiving of the three standard Minonokuni lines.The deba is a single-bevel knife with a thick, heavy spine. The heel cuts through heads and collars, and the thinner forward edge glides along the backbone to lift each fillet. Learning that motion takes a few fish, and a forgiving edge makes the learning easier.
Built for LearningUme uses a softer carbon steel than Take or Matsu. It is less likely to chip when a cut goes wrong, and it is the best of the three lines for learning to sharpen a single bevel. A Minonokuni 1000 grit waterstone is the stone to begin with. As skills grow, the Take 150mm deba in white steel is the natural next knife.For bigger fish and poultry, see the Ume 165mm deba. Our kitchen knife shapes guide shows how the deba is used alongside the yanagiba and usuba. Learn More -
Minonokuni Take 8.3-inch (210mm) Kama-Usuba
This 210mm kama-usuba gives a professional the length to work through large vegetables and the tip to finish them with detailed cuts. The Kansai, or Osaka, style blade curves down to a point, which makes it suited to decorative cutting as well as everyday slicing.Use the full length for push cuts on daikon and squash, and for katsuramuki on longer pieces. The tip handles scoring and carving. Because the blade is heavier than the 180mm, it moves through dense roots with less pressure from the cook.
Take Among the Three LinesWe call Take the sweet spot. Its white steel is good enough for professional use but less brittle than blue steel, which helps protect the thin tip from chipping during detail work. Cooks experienced with single-bevel knives can step up to the Matsu 210mm kama-usuba, and those learning to sharpen can start with the Ume 210mm kama-usuba.The Take 180mm kama-usuba is the lighter option, and the square-tipped Take 210mm usuba suits a cook who mostly cuts sheets and julienne. The knife shapes guide compares them. Learn More$245.00 -
Minonokuni Take 7.1-inch (180mm) Left-Handed Kama-Usuba
Left-handed cooks who want a traditional Japanese vegetable knife with a point can choose this Take kama-usuba. The single bevel is on the left face, and the blade has the curved, pointed tip of the Kansai style, so the knife handles everyday slicing as well as fine detail work.At 180mm, the blade is easy to manoeuvre and small enough to tap-chop quickly without fatigue. The flat edge meets the board along its length for clean push cuts, and the tip can score and carve garnishes.
What to ExpectThe Take line uses white steel. It takes a very sharp edge, and it is less brittle than blue steel, which is why we recommend Take to cooks who are not yet experts in single-bevel knives. The Ume 180mm left-handed kama-usuba is a more forgiving introduction.For straight-edged vegetable work, see the Take 180mm left-handed usuba. The right-handed version is the Take 180mm kama-usuba. Read about the shape in our knife shapes guide. Learn More$265.00 -
Minonokuni Take 7.1-inch (180mm) Kama-Usuba
With its sickle-shaped tip, the kama-usuba does what the square Kanto usuba cannot. The tip reaches into a vegetable for detailed carving and scoring, while the long, flat edge still handles push cuts and katsuramuki. This Kansai-style knife is sometimes called a kamagata usuba.At 180mm, it is easy to control on a home board and light enough for quick, repeated cuts without tiring the hand. Use the edge for slicing scallions, cucumbers and radishes, then turn to the tip to cut a crosshatch into a shiitake cap or shape a carrot into flowers for a garnish.
Take SteelWhite steel takes a very keen edge, and in the Take line it is good enough for professional use while staying less brittle than blue steel. The thin tip of a kama-usuba benefits from that extra tolerance. Experienced cooks can choose the Matsu 180mm kama-usuba, and beginners the Ume 180mm kama-usuba.The Take 210mm kama-usuba adds length. Left-handed cooks should see the Take 180mm left-handed kama-usuba. The kitchen knife shapes guide explains the usuba family. Learn More -
Minonokuni Take 8.3-inch (210mm) Usuba
The 210mm usuba is the size for steady vegetable prep. Its length takes a long daikon through katsuramuki without the sheet running off the blade, and its tall, flat face carries sliced vegetables neatly from the board to the pan.This is a Kanto-style usuba, square at the tip. Its single bevel and flat edge give the control needed for paper-thin sheets, delicate garnishes and precise cuts, and the blade passes through vegetables without cracking or bruising them. Keep the motion a straight push. A rocking cut wears the edge and leaves slices joined at the bottom.
Which Usuba to ChooseTake is the sweet spot of the three standard Minonokuni lines. Its white steel holds an edge well enough for professional use and is less brittle than blue steel, so it suits cooks who are confident with knives but newer to single-bevel blades. The Matsu 210mm usuba is the blue steel option, and the Ume 210mm usuba is the most forgiving.For a shorter knife, see the Take 180mm usuba. The Take 210mm kama-usuba is the pointed Kansai form. The knife shapes guide covers both shapes. Learn More$245.00 -
Minonokuni Take 7.1-inch (180mm) Left-Handed Usuba
Katsuramuki and fine julienne depend on the bevel being on the correct side of the blade. For a left-handed cook, this Take 180mm usuba puts it on the left face, so a daikon unrolls into an even sheet and each push cut falls straight.The usuba is a push-cutting knife. Its flat edge meets the board along the full length, so slices of cucumber or carrot separate completely without rocking. That flat profile also lets the cook cut vegetables into the very fine needle threads used for garnish.
A Practical First UsubaWe stock left-handed knives in all three standard lines. Take is the middle line, with white steel that is ready for professional work and less brittle than blue steel. It suits a left-handed cook who wants to learn the usuba without the more delicate edge of Matsu. The Ume 180mm left-handed usuba is the most forgiving and easiest to sharpen.The right-handed version is the Take 180mm usuba. For decorative work with a point, see the Take 180mm left-handed kama-usuba. The knife shapes guide describes the usuba. Learn More -
Minonokuni Take 7.1-inch (180mm) Usuba
Thin and square at the tip, the usuba is the Japanese knife for vegetables. This 180mm Take usuba is the size we suggest for a home kitchen or for a cook learning the shape, and it is ground flat enough to make very precise cuts with clean lines.Two techniques define the knife. In katsuramuki, a section of peeled daikon or cucumber is rotated against the edge to unroll a long, translucent sheet. In push cutting, the blade goes straight down and slightly forward through carrots and scallions, separating each slice fully because the whole edge meets the board.
Choosing Between the LinesTake uses white steel, which is less brittle than the blue steel in the Matsu 180mm usuba and still good enough for professional use. That makes it a sound choice for a cook who is not yet an expert with single-bevel blades. The Ume 180mm usuba is the most forgiving if sharpening practice is part of the plan.The Take 210mm usuba is longer, and the Take 180mm kama-usuba adds a pointed tip for garnish work. Left-handed cooks should see the Take 180mm left-handed usuba. The knife shapes guide covers the usuba and nakiri. Learn More$195.00
