Knives

Items 111 to 120 of 1489 total

per page

Page:
  1. 10
  2. 11
  3. 12
  4. 13
  5. 14
  • Minonokuni Take 9.4-inch (240mm) Yanagiba

    For a cook who wants one yanagiba that can serve at home and in a professional kitchen, 240mm is the length to choose. It slices a full saku of tuna or a salmon fillet in a single pull, but it is not so long that it becomes awkward on an ordinary board.The Take line is the one we point a cook toward when in doubt. White steel takes an edge fine enough for sashimi and is less brittle than blue steel, so a slip of technique is less likely to cost a chip in the edge. It is the sweet spot between the Matsu 240mm yanagiba, for experienced hands, and the Ume 240mm yanagiba, for a first knife.
    Using the LengthPlace the heel at the far edge of the fish and draw the blade toward you in one smooth motion, letting the tip finish the cut. The slice should come away with a bright, unbroken surface. If it needs a second stroke, the cut was too short or too slow.Other lengths are the 210mm and the 270mm. A left-handed cook should choose the Take 240mm left-handed yanagi. The knife shapes guide has more on Japanese slicers. Learn More
  • Minonokuni Take 8.3-inch (210mm) Left-Handed Yanagi

    A left-handed sushi cook needs the bevel on the left side of the blade to slice cleanly, and this Take 210mm yanagi has it. Held in the left hand, the edge draws through the fish and steers the slice away from the block, the same way a right-handed yanagi works in the right hand.The 210mm length fits a home board and handles sashimi from salmon, tuna and yellowtail fillets. Expect a well-ground, flat blade that is sharp when it arrives. Like any single-bevel knife, it performs best once the cook has learned to maintain the edge on waterstones.
    Choosing a Line for Left-Handed UseTake is the middle of our three standard lines, and we stock left-handed models in all three. Take’s white steel is less brittle than the blue steel Matsu 210mm left-handed yanagiba but holds an edge well enough for a professional kitchen. The Ume 210mm left-handed yanagi is the most forgiving and the easiest to learn to sharpen.For a longer stroke, see the Take 240mm left-handed yanagi. The right-handed version is the Take 210mm yanagiba. Our knife shapes guide explains the yanagi in detail. Learn More
  • Minonokuni Take 8.3-inch (210mm) Yanagiba

    A 210mm yanagiba is a comfortable length for slicing sashimi on a home cutting board, and the Take version gives a first-time sushi cook a knife that will grow with their skills. The blade is ground very flat, and the long, narrow edge cuts a block of fish in a single drawing stroke.Draw the knife toward you from the heel, keeping the pressure light. The single bevel and hollow back let each slice fall away cleanly instead of clinging to the blade. Short fillets of salmon or yellowtail are well within reach of this length.
    Take or Matsu?The Take line uses white steel, which takes a very fine edge and comes back quickly on a waterstone. It is less brittle than the blue steel of the Matsu 210mm yanagiba, and so better suited to a cook who is still learning both the slicing stroke and how to sharpen a single bevel. It is good enough for professional use, which is why we call Take the sweet spot.Longer blocks of fish are easier with the Take 240mm yanagiba. Left-handed cooks should see the Take 210mm left-handed yanagi. The knife shapes guide covers the yanagiba. Learn More
  • Minonokuni Take 7.7-inch (195mm) Deba

    The 195mm is the largest deba in the Take line, built for large saltwater fish and big freshwater fish. Its mass is the point. A heavy blade drops through the head and collar of a large fish with little effort from the cook, and the long edge keeps the cut straight along a wide frame.That weight makes it slower on small fish, so it suits a cook who regularly handles large ones, such as a restaurant buying whole fish or an angler cleaning a large catch. For mixed work, the Take 180mm deba or Take 165mm deba is easier to manoeuvre.
    Steel ChoiceWhite steel gives the Take line an edge that holds up in a professional kitchen while staying less brittle than blue steel. That combination is why we call Take the sweet spot of the Minonokuni range. A cook who wants the same size in the most forgiving steel can look at the Ume 195mm deba.Left-handed cooks will find the Take 180mm left-handed deba the largest left-handed option in the line. For more on choosing a deba, see the guide to knife shapes. Learn More
  • Minonokuni Take 7.1-inch (180mm) Left-Handed Deba

    This is a left-handed deba in the true sense. Forging and grinding put the single bevel on the left face, rather than reshaping a right-handed blade, so a left-handed cook gets the same control along the frame that the knife was designed to give. At 180mm, it is the largest left-handed deba in the Take line.The size is meant for large fish such as salmon and big snapper. The heavy heel splits heads and cuts collars, and the long edge follows the backbone in fewer passes. On poultry, it breaks down a whole bird with room to spare.
    A Line for Learning and for WorkTake is the line we suggest for cooks who want a knife good enough for professional work but less brittle than blue steel. For a left-handed cook still learning to sharpen a single bevel, the Ume 180mm left-handed deba is more forgiving still.Shorter left-handed sizes are the Take 165mm and Take 150mm. The right-handed version is the Take 180mm deba. The knife shapes guide explains where the deba fits.Each Take knife is forged by hand. Expect small hammer marks, a slightly uneven finish on the iron and other signs of handwork, none of which affect the edge. Learn More
  • Minonokuni Take 7.1-inch (180mm) Deba

    When the fish on the board is a large salmon or a big snapper, the 180mm deba is the size to reach for. The extra length and weight let the heel drive through the head and collar in fewer strokes, and the longer edge follows a wide backbone in one pass.Being heavy, the knife does more of the work, and the cook should let it. Guide the blade along the bone instead of pushing it, and use the tip to separate the belly and ribs. A heavy deba still has a thin edge, so leave frozen fish and thick beef bones to other tools, and never twist the blade in a joint.
    Why We Recommend TakeTake is the middle of the three standard lines. Its white steel holds an edge well enough for a working kitchen, and it is less brittle than blue steel, so it is the sensible choice for a cook who has not used many single-bevel knives. Cooks experienced with the grind may prefer the blue steel Matsu 180mm deba.The Take 165mm deba is more nimble, while the Take 195mm deba is the largest size. Left-handed cooks should see the Take 180mm left-handed deba. The knife shapes guide covers the deba in detail. Learn More
  • Minonokuni Take 6.5-inch (165mm) Left-Handed Deba

    For a left-handed cook, the 165mm Take deba is a dependable all-round choice. The blade is forged and ground as a true left-handed knife, with the bevel on the left face, so it tracks along the spine of a fish the way a right-handed deba does for a right-handed cook.The weight at this size is useful when tracing the backbone on salmon or a small tuna, and it carries through the head and collar without forcing. It is also a good size for game birds and freshwater fish. Before a large job, check that the edge is keen. A deba that has lost its edge needs more force, and force is how a thin edge gets chipped.
    Steel and SizeTake uses white steel, which takes a very keen edge and returns to sharpness quickly on a waterstone. It is less brittle than blue steel, which is why we suggest Take for cooks who are not yet experts in single-bevel knives.The Take 150mm left-handed deba is lighter for small fish, and the Take 180mm left-handed deba adds weight for larger ones. The right-handed model is the Take 165mm deba. See the kitchen knife shapes guide for an overview of the deba. Learn More
  • Minonokuni Take 6.5-inch (165mm) Deba

    Between the small and large debas, the 165mm is the all-round size. It has enough weight to remove the head of a medium salmon or sea bass, yet it is easy enough to control on mackerel and trout. It is also a well-sized knife for breaking down whole chickens and for preparing poultry for yakitori.On poultry, the heel cuts through the joints and the thin wing tips, while the tip frees the oysters and the breast from the carcass. On fish, the single bevel keeps the edge flat to the frame for a clean three-piece fillet. Neither job calls for chopping through heavy bone, and the deba should not be used that way.
    Matsu, Take or UmeAll three standard Minonokuni lines make a 165mm deba. Take, in white steel, is the sweet spot. It is adequate for professional use and less brittle than the blue steel Matsu 165mm deba. For a cook who wants the most forgiving knife to learn sharpening on, the Ume 165mm deba is the place to start.Left-handed cooks should choose the Take 165mm left-handed deba. The kitchen knife shapes guide covers how a deba differs from a boning knife. Learn More
  • Minonokuni Take 5.9-inch (150mm) Left-Handed Deba

    A deba ground for the left hand puts the bevel on the left face of the blade, so the edge follows the backbone when a left-handed cook fillets a fish. This Take 150mm deba is that mirror image, and we keep it in stock.The size suits trout, mackerel, small bream and similar fish, and it handles poultry jointing as well. Start at the head with the heavy heel, then work along the frame with the tip. A right-handed deba used in the left hand fights the cook on every pass and leaves meat on the bone, which is why the grind matters more on this knife than on a double-bevel blade.
    Choosing TakeThe Take line is our recommendation for a cook who is new to single-bevel knives. Its white steel is ready for professional use, yet it is less brittle than blue steel and will tolerate the occasional misjudged cut while technique develops. A Ume 165mm left-handed deba is the more forgiving option for a cook who expects to spend time learning to sharpen.For larger fish, the Take 165mm left-handed deba and Take 180mm left-handed deba add length and weight. The right-handed version is the Take 150mm deba. The knife shapes guide has more on the deba. Learn More
  • Minonokuni Take 5.9-inch (150mm) Deba

    A 150mm deba covers most fish a home cook will bring home whole, from trout and mackerel to a small snapper, and it is small enough for a standard home cutting board. The Take version is a sound first deba for a cook who wants to learn traditional fish butchery.The thick, heavy blade does the forceful work. Cut through the head and collar with the heel, then switch to the tip to follow the backbone and separate the fillets cleanly from the bone. The single bevel helps the edge ride flat along the frame, so less flesh is left behind.
    A Steel That Tolerates LearningWe describe Take as the sweet spot of the Minonokuni range. Its white steel holds a fine edge well enough for professional kitchens, and it is less brittle than the blue steel used in the Matsu deba. That margin matters while a cook is learning how hard to lean on the heel.Other SizesSmaller fish are quicker work with the Take 135mm ko-deba. The Take 165mm deba adds weight for larger fish and for poultry. Left-handed cooks can order the Take 150mm left-handed deba, which we keep in stock. Read about the deba and its uses in our guide to kitchen knife shapes. Learn More

Items 111 to 120 of 1489 total

per page

Page:
  1. 10
  2. 11
  3. 12
  4. 13
  5. 14