Knives
How would you like to shop?

Chef's Knives
Chopping, slicing, and mincing

Santoku Knives
Japanese all-purpose blade

Paring Knives
Peeling and detail work

Utility Knives
Sandwiches and small produce

Bread Knives
Crusty loaves and soft bread

Carving and Slicing
Roasts, ham, and brisket

Boning Knives
Removing meat from the bone

Knife Sets
Outfitting a kitchen or giving a gift
Shop All Shapes
Fillet, nakiri, yanagi, cleavers, steak, oyster, and every other shape we carry
European Makers
Professional and Commercial
Not sure where to start?
What will you cut most often?
What is your budget per knife?
Which edge style do you want?
All Knives
-
Zwilling Four Star 5.5-inch Flexible Boning Knife
Deboning poultry, pork and fish is a matter of following the bone, and a flexible blade bends to do that with less waste. The Zwilling Four Star 5.5-inch flexible boning knife has a long, thin blade that traces the contours of a chicken thigh or a pork shoulder and separates meat from bone and skin cleanly.It is also the right knife for silver skin and fat cap trimming. The pronounced bolster acts as a finger guard, which matters on a knife used with a firm grip and some force, and the molded handle keeps a secure hold when wet.Work with the tip against the bone and let the blade flex rather than levering it. Short, controlled strokes leave the most meat on the trimmed cut.For filleting fish, the Four Star 7-inch fillet knife is longer and more flexible. Our Kitchen Knife Shapes guide explains boning knives. Learn More$109.95 -
Zwilling Pro 5.5-inch Flexible Boning Knife
A flexible boning knife bends to follow the curve of a bone, which leaves more meat on the cutting board and less on the frame. The Zwilling Pro 5.5-inch flexible boning knife has a narrow blade with a fine point for starting cuts and enough flex to trace around chicken thighs, pork ribs and fish.It is also the knife for removing silver skin from a pork tenderloin: slide the tip under the membrane, angle the edge slightly up and draw along the length. The Pro curved bolster keeps the grip secure when hands are wet.Work with the tip against the bone and let the blade flex rather than levering it. Short, controlled strokes leave the most meat on the trimmed cut, and the narrow blade turns easily around a hip joint or a wishbone.For filleting whole fish, the Pro 7-inch fillet knife has more length. Our Kitchen Knife Shapes guide explains stiff and flexible boning knives. Learn MoreRegular Price: $129.95
Special Price $103.95
-
Wüsthof Classic 5-inch Boning Knife
A boning knife needs a narrow, pointed blade that slips between meat and bone, and the Wüsthof Classic 5-inch boning knife is sized for home kitchens. It separates chicken thighs from the bone and takes the bone out of a leg of lamb.The short blade keeps the point under control as you work around joints, and the pointed tip pierces connective tissue to start each cut. Wüsthof lists its uses as removing bones and skinning, along with trimming tendons and fat. Let the tip and edge ride along the bone; chopping through bone is a job for a cleaver.For longer cuts, such as boning a whole ham or a turkey breast, the Classic 6-inch flexible boning knife gives more reach and bends to follow the bone. For fish, see the Classic Ikon 7-inch flexible fillet knife. The Classic Ikon 5-inch boning knife carries this blade on a Classic Ikon handle. Our Kitchen Knife Shapes guide explains boning and fillet knives. Learn More$114.95 -
Wüsthof Classic 6-inch Flexible Boning Knife
Wüsthof’s Classic 6-inch flexible boning knife has a longer, thinner blade than the 5-inch boning knife, and it bends a little under pressure. That flex lets the edge follow the curve of a rib cage or a turkey breastbone so less meat stays behind, and the extra inch gives a long, smooth stroke when skinning a pork loin.It is a good choice for whole chickens and turkeys, for trimming brisket and for removing the skin from salmon fillets. The narrow tip works into joints to separate them without chopping. As with any boning knife, let the edge ride along the bone and leave chopping to a cleaver.Customers deciding between this knife and the Classic 5-inch boning knife can consider the work. The 5-inch is easier to control around small joints; this 6-inch covers larger cuts. For dedicated fish work, the Classic Ikon 7-inch flexible fillet knife is longer and thinner still. See our guide to knife shapes for more on boning knives. Learn More$119.95 -
Wüsthof Classic Ikon 5-inch Boning Knife
Deboning chicken thighs, trimming a pork shoulder and peeling silver skin off a tenderloin are the daily work of a boning knife, and this 5-inch Classic Ikon knife is built for them. Its slim, pointed blade slips between meat and bone where a chef’s knife is too wide to follow.A short blade means precise control around joints. Use the point to open connective tissue, then keep the edge tight against the bone as you cut. The Classic Ikon handle keeps the knife steady in a full grip even when your hands are slick from raw meat, and the open heel lets the whole edge be sharpened. The synthetic handle has the look of wood without the discoloration, odor retention and staining that wood can develop around raw meat. Cut along bones, never through them.For larger cuts, the Classic 6-inch flexible boning knife gives more reach. Fish calls for the longer, thinner Classic Ikon 7-inch fillet knife. The Classic 5-inch boning knife pairs this blade with the riveted Classic handle. Our guide to kitchen knife shapes explains boning knives. Learn More$159.95 -
Dexter-Russell Sani-Safe 6-inch Curved Boning Knife
A curved boning blade follows the shape of a rib or a leg bone, so more of the edge stays in contact as it peels meat away. This 6-inch Sani-Safe knife pairs that curve with a narrow, firm blade that Dexter-Russell describes as giving steady control through tougher cuts, the kind of work that comes up when breaking down whole chickens or boning out a pork butt.Professionals, home cooks and fishermen all buy Dexter-Russell knives from us, and this curved boner suits each of them. It also trims fat and silver skin from a roast and fillets fish. The edge comes back quickly on a honing steel or stone, and the blade will not rust in a wet cutting room.
Choosing a Curved Boning KnifeThe SofGrip 6-inch Curved Boning Knife has the same shape with a softer, cushioned grip. If the work needs a straight, narrow point, the Sani-Safe 6-inch Narrow Boning Knife fits better into joints, and the Sani-Safe 6-inch Flexible Boning Knife flexes for close trimming. Learn More$23.99 -
Dexter-Russell Sani-Safe 6-inch Wide Boning Knife
Boning out a pork loin or separating a beef chuck into its muscles puts more lateral force on the knife than trimming a chicken does. The extra height of this 6-inch Sani-Safe wide boning knife adds stability for those larger cuts, and Dexter-Russell designed the broader profile for exactly that reason. The wider blade also gives the knuckles more clearance above the board.The blade takes a sharp edge and stands up to repeated sanitizing without staining. Dexter molds the handle from recycled plastic, and it seals tightly to the blade so meat juices cannot work into the joint. Meat cutters, hunters processing their own deer and home cooks who buy whole cuts all find work for a wide boner, and its robust build also makes it a capable fillet knife for larger fish.
Wide or Narrow Boning Knife?A narrow blade such as the Sani-Safe 6-inch Narrow Boning Knife fits tighter spaces around joints. For the same wide shape with a wood handle and carbon steel, see the Traditional 6-inch Wide Boning Knife. Learn More$24.99 -
Dexter-Russell Sani-Safe 6-inch Flexible Boning Knife
Trimming fat from a brisket or lifting the skin off a chicken breast goes cleaner when the blade bends with the surface. Dexter-Russell gives this flexible Sani-Safe boner a narrow 6-inch blade with just enough flex to slide under fat and around bones without digging into the meat. Many cooks also use a flexible boner for small fish, where the same give helps the edge ride along the backbone. This knife is easy to sharpen once it dulls, responds well to a whetstone and stays keen with regular honing on a fine-cut rod.A day of processing in a cold, wet room leaves no rust on the blade, and the guard at the front of the handle keeps fingers off the edge when the knife pushes through a seam. Dexter-Russell has made cutlery in Southbridge, Massachusetts since 1818, and its knives remain especially popular with customers across the Northeast.
How Much Flex?We use a flexible blade for filleting fish and a wide, stiff blade for cutting and trimming raw meat and thinner cuts. For more resistance on beef and pork, choose the firm Sani-Safe 6-inch Narrow Boning Knife. The V-Lo 6-inch Flexible Boning Knife has a similar blade with a cushioned V-Lo handle. Learn More$24.99 -
Dexter-Russell Sani-Safe 6-inch Narrow Boning Knife
Separating a chicken thigh from the backbone or working a knife around a pork shoulder blade calls for a narrow point that fits into joints. Dexter-Russell built this 6-inch Sani-Safe boning knife for that work, with a slim, firm blade that steers between cartilage and bone and handles the smaller portions where a wider blade gets in the way. It also trims silver skin.The Sani-Safe line goes back to 1941, when Dexter introduced its first Sani-Dexter knives for commercial kitchens, and it is still the series meat departments and processing plants reach for. The handle stays secure in a greasy hand, and it is sealed to the blade so there is no gap for food to collect. Brine and blood will not rust the blade, so the knife can go from the board to the sanitizer sink without special treatment.
Other Sani-Safe Boning KnivesFor a blade that follows the curve of a bone, choose the Sani-Safe 6-inch Curved Boning Knife. The Sani-Safe 6-inch Flexible Boning Knife bends to trim under fat and skin, and the Sani-Safe 6-inch Wide Boning Knife gives more blade height for larger cuts. The table below compares every Dexter-Russell boning knife we carry. Learn More$24.99 -
Dexter-Russell Traditional 6-inch Wide Boning Knife, Carbon Steel
The 1376 is one of Dexter-Russell’s longest-running patterns, a 6-inch wide boning knife with a carbon steel blade and a wood handle held by brass rivets. Its broad blade gives leverage and stability when boning out pork shoulders, beef and venison, and it is tall enough to keep the knuckles clear of the board.Dexter-Russell says the high-carbon blade takes a keen, long-lasting edge that is easy to sharpen, which is the main reason butchers and hunters still choose carbon. A few strokes on a steel bring it back during a long day of processing. Carbon steel does require more attention than stainless and will darken with use. These Traditional knives have a long following in the Northeast, close to the Southbridge, Massachusetts factory where Dexter-Russell has worked since its founding.
Other Traditional Boning KnivesThe same wide pattern comes in a 7-inch (1377) and an 8-inch (1378) length for larger animals. For tighter work around joints, the Traditional 6-inch Narrow Boning Knife (1376N) has a slimmer blade. Learn More$25.95
