F. Dick Rapid Steel HyperDrill II Knife Sharpener

F. Dick developed the Rapid Steel with HyperDrill II rods for the demands of meat processing. The very fine strokes of the rods remove enough material to restore the edge while smoothing it at the same time, and the resulting fine edge holds for a long time.

Using it is simple. Draw the blade through the slot and the rods work both sides of the edge together at the right angle. That makes consistent results possible for every cutter on the line, not only the ones who have mastered a steel. The tension springs and the redesigned HyperDrill II rods are the heart of the sharpener.

Mount it at the cutting line for shared use.

A version with coated rods for higher abrasion is the Rapid Steel Action set. For a sharpener with guiding magnets, compare the Magneto Steel HyperDrill, and for a smaller hand unit, the Master Steel HyperDrill.

SKU: D9 0081 400

Availability: In stock

$92.95
  • Details

    Specifications

    • Rods: HyperDrill II, reworked fine cut, stainless steel
    • Springs: Tension springs with no measurable wear, lifetime guarantee
    • Housing: Mechanism in a locked box
    • Mounting: Hand-held, counter base or table mount
    • Made in: Germany
    • Item number: 90081400

    F. Dick Knife Sharpeners Compared

    For a traditional steel instead, our best-selling steel overall is the EuroCut 12-inch Round Regular Cut Steel.

    SharpenerRodsMechanismBest for
    Rapid Steel Action Set with BaseAction, ultra-hard special coatingTension springsHigh abrasion on all steel types
    Rapid Steel HyperDrill II Knife SharpenerHyperDrill II, reworked fine cutTension springsMeat processing
    Master Steel Polish Knife SharpenerPolishedTension springsStraightening and smoothing
    Master Steel HyperDrill II Knife SharpenerHyperDrill II, reworked fine cutTension springsFine, even material removal
    Master Steel Ultra-Fine HyperDrill Knife SharpenerUltra-fine HyperDrillTension springsFine, even material removal
    Magneto Steel HyperDrill Knife SharpenerHyperDrill II, reworked fine cutSprings and guiding magnetsSet angle, dust kept off the knife
    Silver Steel HyperDrill Knife Sharpener2 x 2 HyperDrillNo springsHygiene-critical plants

    How to Use

    Hold the sharpener in your less-dominant hand, or mount it in a holder. Lean the blade slightly against one side of the slot and draw it through the rods from heel to tip with light pressure. Use the spring action of the rods without pushing the knife to the bottom of their travel, and repeat a few times.


    Good to Know

    These are honing tools. They straighten, align and smooth an edge that already has a bevel; they will not put a new edge on a dull knife. For that, use a sharpening machine or whetstones.


    Care

    Rinse the sharpener under warm running water after use to clear metal particles, then let it dry. Replace the rods when they stop restoring the edge.

    Additional Info

    SKU D9 0081 400
    Brand Friedrich Dick
    Country of Manufacture Germany
    Manufacturer's Part Number 90081400
    Manufacturer's Suggested Retail Price $143.00

    Write Your Own Review

    You're reviewing: F. Dick Rapid Steel HyperDrill II Knife Sharpener