F. Dick Master Steel Polish Knife Sharpener

The Master Steel Polish straightens and smooths an edge with polished rods, so it maintains a sharp knife without removing metal. It replaces a honing steel for regular edge maintenance and needs none of the technique a steel does.

The angle is built in, and both sides of the edge are burnished at once as the knife passes through the slot. It suits boning specialists and processors who hone many times a shift and want the smoothest edge. Used by hand, it is quick to pick up at the cutting table; mounted in the holder, it frees both hands for the knife.

Keep it at the station so a few passes fit between cuts.

For a little material removal along with smoothing, the Master Steel HyperDrill takes fine cut rods. The table mount is the Master Steel holder, and fresh rods are the Master Steel Polish replacement rods.

SKU: D9 0083 00-05

Availability: In stock

$92.95
  • Details

    Specifications

    • Rods: Polished stainless steel, for straightening and smoothing
    • Protection rods: Guide the knife with a polishing effect and keep plastic shavings out of the meat
    • Springs: Tension springs with no measurable wear
    • Mechanism: Tightly sealed against outside influences
    • Grip: Recessed grips on the back, secure with gloves
    • Mounting: Hand-held or in the optional holder
    • Made in: Germany
    • Item number: 9008300-05

    F. Dick Knife Sharpeners Compared

    For a traditional steel instead, our best-selling steel overall is the EuroCut 12-inch Round Regular Cut Steel.

    SharpenerRodsMechanismBest for
    Rapid Steel Action Set with BaseAction, ultra-hard special coatingTension springsHigh abrasion on all steel types
    Rapid Steel HyperDrill II Knife SharpenerHyperDrill II, reworked fine cutTension springsMeat processing
    Master Steel Polish Knife SharpenerPolishedTension springsStraightening and smoothing
    Master Steel HyperDrill II Knife SharpenerHyperDrill II, reworked fine cutTension springsFine, even material removal
    Master Steel Ultra-Fine HyperDrill Knife SharpenerUltra-fine HyperDrillTension springsFine, even material removal
    Magneto Steel HyperDrill Knife SharpenerHyperDrill II, reworked fine cutSprings and guiding magnetsSet angle, dust kept off the knife
    Silver Steel HyperDrill Knife Sharpener2 x 2 HyperDrillNo springsHygiene-critical plants

    Master Steel Parts and Accessories

    If you need another F. Dick replacement part, call us at 1-800-714-8226 and we will be happy to order it.

    PartFits
    Holder for Master Steel SharpenerMaster Steel Polish and Master Steel HyperDrill
    HyperDrill II Replacement Rods, Set of 3Master Steel HyperDrill II
    Master Steel Polish Replacement Rods, Set of 3Master Steel Polish
    Master Steel Left Spring Housing with 1 HoleMaster Steel (left side)
    Master Steel Right Spring Housing with 2 HolesMaster Steel (right side)

    How to Use

    Hold the sharpener in your less-dominant hand, or mount it in a holder. Lean the blade slightly against one side of the slot and draw it through the rods from heel to tip with light pressure. Use the spring action of the rods without pushing the knife to the bottom of their travel, and repeat a few times.


    Good to Know

    These are honing tools. They straighten, align and smooth an edge that already has a bevel; they will not put a new edge on a dull knife. For that, use a sharpening machine or whetstones.


    Care

    Rinse the sharpener under warm running water after use to clear metal particles, then let it dry. Replace the rods when they stop restoring the edge.

    Additional Info

    Grit No
    SKU D9 0083 00-05
    Brand Friedrich Dick
    Country of Manufacture Germany
    Manufacturer's Part Number 9008300-05
    Manufacturer's Suggested Retail Price $143.00

    Write Your Own Review

    You're reviewing: F. Dick Master Steel Polish Knife Sharpener