Fry Pans
Engineered for high-heat searing and sautéing, the fry pan is an indispensable tool for developing flavor and texture. The broad, flat base ensures maximum contact with your heat source, delivering superior heat distribution for a flawless, edge-to-edge sear. This is critical for achieving a deep crust and developing that all-important fond—the flavorful foundation of any great pan sauce. The gently flared sides are engineered for technique: they promote rapid evaporation for perfect browning, allow for an effortless sauté toss, and grant uninhibited access for turning delicate proteins or plating with precision. This is the shape that offers ultimate control, making it the most indispensable pan on the line.
-
Made In 11-inch Tom Colicchio Carbon Steel Frying Pan
Tom Colicchio cooked for decades with a carbon steel pan he bought at Zabar’s in the 1980s. Made In spent 18 months with him reproducing it, using 3D scanning to capture the shape, and built the result in heavier-gauge carbon steel with a long, solid handle.The extra steel holds more heat when a cold steak or a pan of scallops goes in, so the sear keeps going instead of stalling. A broad floor leaves room to baste with butter, and the tapered walls make it easy to tilt the pan and spoon. The long handle reaches into the back of a hot oven for finishing a thick chop or a whole fish.
Colicchio Pan or the Standard 12-inch?The Made In 12-inch Seasoned Carbon Steel Frying Pan has a slightly larger floor, 9.25 inches against 9, and weighs about the same. Choose the Colicchio pan for the thicker steel and the brass handle, which conducts heat and calls for a towel. Made In also offers a matching Tom Colicchio Carbon Steel Roasting Pan. Learn MoreRegular Price: $249.00
Special Price $229.95
-
Matfer Bourgeat Tradition 9 1/2-inch Stainless Steel Fry Pan
The Tradition 9 1/2-inch pan is a stainless steel fry pan with a thick sandwich base, for cooks who want to sear and build a pan sauce rather than rely on a coating. It suits two chicken breasts, a pair of pork chops or scallops for two.Stainless does not react with wine, citrus or tomato, so the fond left after searing can be deglazed into a sauce in the same pan.Matfer cookware is bought by home cooks as well as professionals. For an uncoated pan that seasons instead, compare the Matfer black carbon steel fry pan. Learn More$201.00 -
Paderno 9.5-inch Black Steel Frying Pan
If you are buying one black steel pan for a household of one or two, this is the size. A 9.5-inch surface takes a thick pork chop, two chicken thighs skin side down, or a pair of eggs with room to spare, and it is light enough to toss vegetables with a flick of the wrist.Black steel holds enough heat to sear well and develops a seasoned, slick surface over the first weeks of use. Customers most often ask how to season it; the steps are below. Note that the handle is riveted to the pan.Those who want to bake cornbread or tarte Tatin in carbon steel should look at Matfer Bourgeat black steel pans, which have welded handles. For stovetop cooking, Paderno is the lower-priced alternative to Matfer and Made In.Other SizesSmaller: 7.125-inch and 7.875-inch. Larger: 12.5-inch and 14.125-inch. For a 9.5-inch pan that tolerates acidic sauces, see the Paderno Series 2500 Stainless Steel Fry Pan. Learn More$30.70 -
Matfer Bourgeat Elite Pro 9 1/2-inch Non-Stick Fry Pan
The 9 1/2-inch Elite Pro is the egg pan of the set: two or three eggs, an omelette, or a delicate fillet of sole that would stick to bare steel.The Elite Pro has a thick, heat-diffused base with a special induction stainless steel bottom plate, and a 4-layer non-stick coating with an anti-scratch protective undercoating. The aluminum cool-touch handle stays comfortable on the burner.Use it with tools that will not mark the coating, such as the Matfer Exoglass Pelton spatula. For high-heat searing, a black carbon steel fry pan is the better pan. Learn More$222.00 -
Matfer Bourgeat 9 1/2-inch Black Carbon Steel Fry Pan
The 9 1/2-inch pan is a practical first carbon steel skillet for a home cook: big enough for three or four eggs, two chicken thighs or a pan of sautéed mushrooms, and still light enough to move with one hand.Carbon steel heats faster than cast iron and responds quickly when you turn the burner down, which suits eggs and fish. With seasoning it becomes slick enough for fried eggs without a coating.If you plan to bake in carbon steel, choose a pan with a welded handle, like this one, over a riveted pan. The next size up is the 10-inch pan.
First Cooks in a New PanFor the first week, cook with a little more fat than you would in a coated pan, and cook foods that add to the seasoning: sautéed onions, roast potatoes, burgers. Avoid long simmers in wine or tomato until the patina is established. After that, the pan handles eggs, fish and pancakes with a thin film of oil. Learn More$92.00 -
Demeyere Industry 5 9.5-inch Stainless Steel Fry Pan
For one stainless fry pan to cover weeknight dinners for two, the Industry 5 9.5-inch is a sensible size. Its 7-inch flat base holds two chicken thighs skin side down or a pair of burgers, and the flared sides let a spatula slide under food at the edge.The pan is fully clad, meaning its five layers and aluminum core run up the walls as well as across the base. A TriplInduc base designed for induction sits underneath, and Demeyere engineers it to resist warping under heat. The handle is welded with no rivets, which removes the usual place for carbonized grease and bacteria to build up, and the smoothly curved interior makes whisking and wiping simple. A folded, dripless rim gives clean transfers of sauces and fat. The pan has enough thermal mass to hold its heat without the wrist fatigue of heavy cast iron, a balance suited to tossing pasta or flipping omelets on a busy line.Set beside the Atlantis Proline 9.4-inch, this pan is about a quarter lighter, which makes a difference when you tilt it to baste or pour off fat. Atlantis holds heat a little longer for a hard sear; Industry 5 is quicker to pick up and move. It is heavier and holds heat more steadily than an All-Clad D3 pan without the weight of Atlantis, which makes it a practical middle ground for daily professional use. Need more room? The Industry 5 11-inch serves four, and the 8-inch is the egg pan of the collection. Read our Demeyere cookware guide for a full comparison of the collections. Learn More$199.95 -
Demeyere Alu Pro 5 10-inch Ceramic Nonstick Fry Pan
Ten inches is the useful middle size in nonstick, wide enough for three or four eggs, a stack of pancakes cooked two at a time or a delicate fish fillet that would tear in a stainless pan. The Alu Pro 5 10-inch has a ceramic nonstick surface and a broad 8.5-inch flat base.Cold-forged aluminum heats fast and spreads that heat evenly across the base. An induction plate is built into the bottom, and Demeyere says the base resists warping. Keep the burner at low to medium, as Demeyere advises for this coating; the aluminum reaches cooking temperature quickly, so there is no need for high heat.The 8-inch Alu Pro 5 is the size for one or two eggs, and the 12-inch handles family breakfasts. A nonstick pan for eggs and fish works well beside a stainless pan for searing, such as the Industry 5 9.5-inch fry pan. The Demeyere cookware guide explains where nonstick fits beside stainless. Learn More$139.95 -
Paderno Series 2500 9.5-inch Stainless Steel Fry Pan
A 9.5-inch stainless fry pan is the size most cooks reach for when the job is two chicken breasts, a pair of fish fillets or a batch of scrambled eggs. Paderno’s Series 2500 version is built for professional kitchens in Italy, with an aluminum core between layers of stainless steel so the heat spreads across the base instead of collecting over the burner.Stainless steel will not react with wine, tomatoes or citrus, so it handles pan sauces and deglazing that would strip the seasoning from a carbon steel pan. Food sticks if the pan goes in cold; preheat it, add the fat, and let proteins release on their own before turning them. The hollow handle is riveted to the body and stays cooler on the stovetop than a solid one.For a lighter, less expensive pan that develops a nonstick surface with use, see the Paderno 9.5-inch Black Steel Frying Pan. Learn More -
Made In 10-inch CeramiClad Non-Stick Frying Pan
A 10-inch nonstick pan covers omelets for two, a pair of fish fillets and a stack of pancakes, the everyday jobs where food must release without much fat. The Made In 10-inch CeramiClad Non-Stick Frying Pan puts a ceramic cooking surface over a clad stainless body, so it heats evenly and holds its temperature better than a thin, single-layer nonstick pan.Keep it for gentle and moderate heat. A hard sear on steak is better done in the 10-inch Stainless Clad Frying Pan or the 10-inch Seasoned Carbon Steel Frying Pan, with the CeramiClad saved for eggs and fish.
CeramiClad or ProCoat?Both coatings sit on the same body in the same sizes. CeramiClad is a ceramic surface rated for a hotter oven, and the 10-inch ProCoat is Made In’s traditional multi-layer nonstick. The 8-inch and 12-inch CeramiClad pans cover single portions and cooking for four. Learn MoreRegular Price: $149.00
Special Price $124.95
-
Demeyere Atlantis Proline 9.4-inch Stainless Steel Fry Pan
Search for this pan and you will find it called both Atlantis and Proline 7. Demeyere sells its Proline fry pans as part of the Atlantis collection, and the 7 refers to the seven layers of metal in the pan. This 9.4-inch size is the everyday one of the four, large enough for two chicken breasts or a pair of pork chops.The layers surround a thick aluminum core and run from the base to the rim, so the sides heat with the floor. Many skillets rely on a thick disc at the bottom to hold heat; here the seven layers extend all the way to the rim, and the thickness and makeup of the walls let the pan hold heat much as a cast-iron skillet does while responding to the burner as quickly as high-end aluminum. That gives more even heat from edge to edge than All-Clad D3 or D5 pans. That matters when the pan goes from searing to reducing wine and stock, because the liquid cooks evenly right up to the edge. The handle is welded on with no rivets inside the pan, so a reduction leaves no hidden debris to scrape around. Demeyere’s TriplInduc base makes the pan efficient on induction, and the base is built to stay flat when hot, which keeps full contact with an induction or glass cooktop.Seven layers make this a heavy pan. If you prefer a light pan you can toss during a quick sauté, the weight may be noticeable over a long cooking session.If a 7-inch flat base is too tight for the way you cook, the 11-inch Proline adds a helper handle and an 8.7-inch base. For a lighter pan at about this size, compare the Industry 5 9.5-inch fry pan. Our guide to Demeyere cookware sets the two collections side by side. Learn More$299.95
