Zwilling Pro 10-inch Chef’s Knife

Ten inches of blade covers more of the board in each stroke, which matters when the job is a case of onions, a whole cabbage or a watermelon. The Zwilling Pro 10-inch chef’s knife brings that reach with the line’s curved bolster, so the hand stays in a controlled pinch grip even with more steel in front of it.

Long slicing cuts through a boneless roast or a side of salmon finish in one pass, and the height of the blade keeps the knuckles clear when chopping. The longer knife needs a board large enough to hold it; on a small board, the 8-inch is easier to manage.

The curve toward the tip still rocks well through herbs, but most of the value of the extra length is in slicing and chopping large quantities, where each stroke covers more of the board.

For an everyday length, see the Pro 8-inch chef’s knife. The 10-inch carving knife is the Pro line’s other choice for large roasts, and our knife shapes guide explains when a longer chef’s knife pays off.

SKU: 1024395

Availability: In stock

Regular Price: $199.95

Special Price $159.95

  • Details

    Specifications

    • Series: Zwilling Pro
    • Type: Chef’s knife
    • Blade length: 10 inches (25.4 cm)
    • Steel: Zwilling special formula high-carbon stainless steel, SIGMAFORGE forged from a single piece
    • Hardening: FRIODUR ice-hardened, 55 to 58 HRC
    • Bolster: curved bolster that supports a pinch grip; the edge can be sharpened from heel to tip
    • Handle: black polymer, triple-riveted over a full tang
    • Made in: Germany
    • Warranty: Zwilling lifetime warranty against defects in materials and craftsmanship
    • Item number: 38401-263

    Zwilling Pro Chef’s Knives

    KnifeBladeBest for
    Pro 6-inch Chef’s Knife6 in.Small boards, smaller hands, quick jobs
    Pro Slim 7-inch Chef’s Knife7 in.Lighter weight and a medium handle
    Pro 7-inch Sous Chef Knife7 in.Low-profile line knife for mixed tasks
    Pro 8-inch Chef’s Knife8 in.All-purpose chopping, rocking and slicing
    Pro 8-inch Traditional Chef’s Knife8 in.Flatter, straighter edge for push and pull cuts
    Pro 10-inch Chef’s Knife10 in.Large produce, big batches, roasts

    Zwilling Pro or Professional S?

    Both lines are forged in Germany from the same special formula steel and ice-hardened to the same range. Professional S has a sturdy, traditional bolster that acts as a finger guard. Zwilling Pro replaces it with a curved half bolster that supports the pinch grip and leaves the whole edge exposed, so it can be sharpened from heel to tip. Knife Merchant carries the Pro line; our Pro vs. Professional S comparison covers the differences in more detail.


    Choosing a Zwilling Line

    All three lines are forged in Germany from the same special formula steel and ice-hardened by Zwilling’s FRIODUR process.

    LineBolster and edgeHandleWho it suits
    Zwilling ProCurved half bolster; sharpenable from heel to tipTriple-riveted black polymerCooks who use a pinch grip and want the full edge available for cutting and sharpening
    Zwilling Four StarPronounced bolster that guards the fingersMolded polypropylene with no rivets or gapsKitchens that value a hygienic, gap-free handle and a traditional finger guard
    Zwilling SpectrumCurved bolster; 12.5-degree edge per sideJute Micarta with a steel end capCooks who want the most acute factory edge of the three lines

    Keeping the Edge

    German stainless at this hardness responds well to honing. A few light strokes on a honing steel before each use keep the edge aligned; sharpen on whetstones or a guided sharpener when honing no longer restores it.


    Care

    • Zwilling rates the knife dishwasher safe but recommends hand washing; wash with warm, soapy water and dry at once.
    • Cut on wood or soft composite boards rather than glass, stone or ceramic.
    • Store in a block, on a magnetic strip or in an edge guard, not loose in a drawer.

    Additional Info

    Blade Length (Inches) 10 in.
    Blade Length (mm) No
    Blade Width (inches) No
    Grind Straight Edge
    Steel Type X50CrMoV15
    Rockwell Hardness 57
    Stainless Yes
    Handle Material POM (Polyoxymethylene)
    Spine Thickness (mm) 2
    Brand Zwilling J.A. Henckels
    Country of Manufacture Germany
    SKU 1024395
    Manufacturer's Part Number 38401-263
    Manufacturer's Suggested Retail Price $250.00

    Write Your Own Review

    You're reviewing: Zwilling Pro 10-inch Chef’s Knife