Victorinox 12-inch Oval Diamond Sharpening Steel

The Victorinox 12-inch oval diamond sharpening steel is a 600 grit steel with a hollow rod coated in diamond. Diamond removes metal, so this steel sharpens a dull edge rather than only realigning it.

The oval shape gives more contact between the steel and the edge of the blade on each stroke. The black nylon handle is non-slip and comfortable in either hand. It is made in the USA.

Use light pressure; diamond cuts quickly, and a few strokes on each side are usually enough. Follow with a fine cut steel or a ceramic rod to smooth the edge.

Rinse the rod and wipe it dry after use to keep metal filings from clogging the diamond surface. Never use oil on a diamond steel.

For a round, solid-core diamond rod, see the Victorinox 12-inch Round Solid Core Diamond Steel. For daily honing after sharpening, the Victorinox 12-inch Fine Cut Honing Steel. Our Honing Rod Guide explains diamond steels.

SKU: 7.8991.15

Availability: In stock

$49.40
  • Details

    Specifications

    • Type: Diamond sharpening steel
    • Rod length: 12 inches (30.5 cm)
    • Surface: Diamond coated, 600 grit, oval, hollow rod
    • Handle: black nylon, non-slip
    • Made in: United States
    • Model number: Victorinox 7.8991.15

    Victorinox Honing and Sharpening Steels

    Regular and fine cuts realign an edge during daily work; polishing steels burnish a fine edge; diamond and helical steels remove metal and are for setting or restoring an edge. Choose a steel about 2 inches longer than your longest knife. Our Honing Rod Guide explains each cut, and our Kitchen Knife Shapes guide covers the knives they maintain.

    SteelLengthSurface
    Classic 8-inch Medium-Fine Honing Rod8 in.Medium-fine
    7-inch Regular Cut Honing Steel7 in.Regular
    10-inch Regular Cut Honing Steel10 in.Regular
    10-inch Regular Cut Honing Steel, Dark Wood Handle10 in.Regular
    10-inch Combination Cut Honing Steel10 in.Combination (fine and polish)
    10-inch Round Polish Steel10 in.Polish (smooth)
    12-inch Regular Cut Honing Steel, Black Handle12 in.Regular
    12-inch Fine Cut Honing Steel, Dark Wood Handle12 in.Fine
    12-inch Helical Cut Steel12 in.Helical (coarse)
    12-inch Combination Cut Honing Steel12 in.Combination (fine and polish)
    12-inch Oval Diamond Sharpening Steel12 in.Diamond, oval, hollow
    12-inch Round Solid Core Diamond Steel12 in.Diamond, round, solid core
    14-inch Regular Cut Honing Steel14 in.Regular
    14-inch Fine Cut Honing Steel, Dark Wood Handle14 in.Fine

    How to Hone

    Hold the steel upright with the tip on a towel or board. Set the heel of the knife against the top of the rod at roughly 15 to 25 degrees and draw the blade down and toward you so the whole edge passes along the rod. Alternate sides for a few light strokes each; pressure does not help.


    Care

    • Wipe the rod clean after use and dry it before storing.
    • Hang it by its ring or store it in a block slot so the surface does not knock against other tools.

    Additional Info

    SKU 7.8991.15
    Cut Specialty
    Handle Material No
    Material Diamond
    Brand Victorinox
    Country of Manufacture United States
    Manufacturer's Part Number 7.8991.15
    Manufacturer's Suggested Retail Price $64.00

    Write Your Own Review

    You're reviewing: Victorinox 12-inch Oval Diamond Sharpening Steel