You have no items in your shopping cart.
Details
Specifications
- Blade length: 10 inches (25.4 cm)
- Construction: precision forged from one piece of high-carbon German steel, with a full tang
- Bolster: shortened, leaving the full edge exposed for sharpening
- Handle: triple-riveted Delrin
- Hardness: 56 ± 1 HRC
- Edge: taper-ground, 15 degrees
- Certification: NSF
- Country of manufacture: Taiwan
- Item number: M23580
- Warranty: Mercer limited lifetime warranty (25 years for corporate users)
Comparing Mercer Slicers, Carving Knives and Forks
| Tool | Line | Length | Best suited to |
|---|---|---|---|
| Genesis 10-inch Carving Knife | Genesis | 10 in. | Roasts and poultry |
| Renaissance 10-inch Carving Knife | Renaissance | 10 in. | Roasts and poultry |
| Renaissance 11-inch Granton Edge Slicer | Renaissance | 11 in. | Thin slices of roast |
| Millennia 11-inch Granton Edge Slicer | Millennia | 11 in. | Thin slices of roast |
| Millennia 14-inch Granton Edge Slicer | Millennia | 14 in. | Brisket and large roasts |
| Millennia 12-inch Serrated Slicer | Millennia | 12 in. | Crusty loaves and bark |
| Genesis 6.5-inch Carving Fork | Genesis | 6.5 in. tines | Holding a roast |
| Renaissance 6-inch Carving Fork | Renaissance | 6 in. tines | Holding a roast |
| Genesis 7-inch Straight Fork | Genesis | 7 in. | Lifting and holding |
| Millennia 7-inch Straight Fork | Millennia | 7 in. | Lifting and holding |
| Millennia 8-inch Straight Fork | Millennia | 8 in. | Larger roasts |
Choosing a Mercer Line
| Line | Construction | Steel and hardness | Handle |
|---|---|---|---|
| Genesis | Forged, with a bolster | High-carbon German, 56 ± 1 HRC | Santoprene, non-slip when wet |
| Renaissance | Forged, short bolster, full tang | High-carbon German, 56 ± 1 HRC | Triple-riveted Delrin |
| Millennia | Stamped | High-carbon Japanese, 53 to 54 HRC | Santoprene and polypropylene, finger guard |
| Ultimate White | Stamped | High-carbon Japanese, 53 to 54 HRC | White polypropylene, finger guard |
| BPX | Stamped, ice-hardened | High-carbon German, 57 to 58 HRC | Glass-reinforced nylon, finger guard |
Care
- Wash by hand after each use with warm water and a mild soap, then dry with a soft towel. Mercer advises against the dishwasher: heat can break down the handle, and caustic detergent can stain and pit the blade.
- Do not leave the knife soaking. If chlorine or bleach touches the blade, rinse it off at once.
- Avoid long contact with aluminum pans or a stainless steel sink, and do not leave the knife standing in condiments held in metal pans. Prolonged contact can cause pitting.
- Store the knife in a block, on a magnetic bar or in a knife guard.
Additional Info
| Blade Length (Inches) | 10 in. |
|---|---|
| Blade Length (mm) | 254 mm |
| Blade Width (inches) | 1.25 |
| Grind | 50/50 Bevel |
| Steel Type | X50CrMoV15 |
| Rockwell Hardness | 56 |
| Stainless | Yes |
| Handle Material | POM |
| Spine Thickness (mm) | 2.12 |
| Brand | Mercer |
| Country of Manufacture | Taiwan |
| SKU | M23580 |
| Manufacturer's Part Number | M23580 |
| Manufacturer's Suggested Retail Price | $107.48 |
