Home
Mercer Millennia 11 in. Granton Slicer

Mercer Millennia 11 in. Granton Slicer

The Millennia 11-inch Granton Edge Slicer is a light, long slicer for roast beef, turkey, ham and smoked salmon. The granton hollows along the blade let thin slices fall away, and the length finishes a slice in one draw rather than a back-and-forth saw that tears the meat.

It is stamped from high-carbon Japanese steel, so it is easy to handle at a carving station and quick to resharpen. The textured handle with finger guard keeps the grip secure.

Choosing a Slicer

For brisket and large roasts, the Millennia 14-inch Granton Edge Slicer adds reach. For crusty bread and bark, see the Millennia 12-inch Serrated Slicer.

SKU: M23011

Availability: In stock

$30.25

Qty:

-OR- -OR-

Add to Wishlist

Details

Specifications

Blade length: 11 inches (27.9 cm)
Construction: stamped from one piece of high-carbon Japanese steel
Handle: Santoprene and polypropylene, with textured finger points and a finger guard
Hardness: 53 to 54 HRC
Edge: granton (hollow-ground scallops)
Certification: NSF
Country of manufacture: Taiwan
Item number: M23011
Warranty: Mercer limited lifetime warranty (25 years for corporate users)

Comparing Mercer Slicers, Carving Knives and Forks

Tool	Line	Length	Best suited to
Genesis 10-inch Carving Knife	Genesis	10 in.	Roasts and poultry
Renaissance 10-inch Carving Knife	Renaissance	10 in.	Roasts and poultry
Renaissance 11-inch Granton Edge Slicer	Renaissance	11 in.	Thin slices of roast
Millennia 11-inch Granton Edge Slicer	Millennia	11 in.	Thin slices of roast
Millennia 14-inch Granton Edge Slicer	Millennia	14 in.	Brisket and large roasts
Millennia 12-inch Serrated Slicer	Millennia	12 in.	Crusty loaves and bark
Genesis 6.5-inch Carving Fork	Genesis	6.5 in. tines	Holding a roast
Renaissance 6-inch Carving Fork	Renaissance	6 in. tines	Holding a roast
Genesis 7-inch Straight Fork	Genesis	7 in.	Lifting and holding
Millennia 7-inch Straight Fork	Millennia	7 in.	Lifting and holding
Millennia 8-inch Straight Fork	Millennia	8 in.	Larger roasts

Choosing a Mercer Line

Line	Construction	Steel and hardness	Handle
Genesis	Forged, with a bolster	High-carbon German, 56 ± 1 HRC	Santoprene, non-slip when wet
Renaissance	Forged, short bolster, full tang	High-carbon German, 56 ± 1 HRC	Triple-riveted Delrin
Millennia	Stamped	High-carbon Japanese, 53 to 54 HRC	Santoprene and polypropylene, finger guard
Ultimate White	Stamped	High-carbon Japanese	White polypropylene, finger guard
BPX	Stamped, ice-hardened	High-carbon German, 57 to 58 HRC	Glass-reinforced nylon, finger guard

Care

Wash by hand after each use with warm water and a mild soap, then dry with a soft towel. Mercer advises against the dishwasher: heat can break down the handle, and caustic detergent can stain and pit the blade.
Do not leave the knife soaking. If chlorine or bleach touches the blade, rinse it off at once.
Avoid long contact with aluminum pans or a stainless steel sink, and do not leave the knife standing in condiments held in metal pans. Prolonged contact can cause pitting.
Store the knife in a block, on a magnetic bar or in a knife guard.

Additional Info

Blade Length (Inches)	11 in.
Blade Length (mm)	280 mm
Blade Width (inches)	1.25
Grind	Granton/Kullenschliff
Steel Type	X30Cr13
Rockwell Hardness	53-54
Stainless	Yes
Handle Material	Santoprene/Polypropylene
Spine Thickness (mm)	2.3
Brand	Mercer
Country of Manufacture	Taiwan
SKU	M23011
Manufacturer's Part Number	M23011
Manufacturer's Suggested Retail Price	$51.10