Mercer Renaissance 11-inch Granton Edge Slicer

Rows of hollows ground into the sides of a granton blade break the suction between steel and meat, so thin slices of roast beef, ham or salmon fall away instead of clinging. The Renaissance 11-inch Granton Edge Slicer pairs that edge with a long, narrow blade for clean, single-stroke slices.

Unlike most Renaissance knives, this slicer is stamped from one piece of steel rather than forged, with a three-quarter tang and the line’s triple-riveted handle. That keeps a long blade light enough to control.


Choosing a Slicer

The Millennia 11-inch Granton Edge Slicer is lighter still, and the Millennia 14-inch handles a whole brisket.

SKU: M23720

Availability: In stock

$39.55
  • Details

    Specifications

    • Blade length: 11 inches (27.9 cm)
    • Edge: granton (hollow-ground scallops), taper-ground
    • Construction: stamped from one piece of high-carbon German steel, three-quarter tang
    • Handle: triple-riveted Delrin
    • Certification: NSF
    • Country of manufacture: Taiwan
    • Item number: M23720
    • Warranty: Mercer limited lifetime warranty (25 years for corporate users)

    Comparing Mercer Slicers, Carving Knives and Forks

    ToolLineLengthBest suited to
    Genesis 10-inch Carving KnifeGenesis10 in.Roasts and poultry
    Renaissance 10-inch Carving KnifeRenaissance10 in.Roasts and poultry
    Renaissance 11-inch Granton Edge SlicerRenaissance11 in.Thin slices of roast
    Millennia 11-inch Granton Edge SlicerMillennia11 in.Thin slices of roast
    Millennia 14-inch Granton Edge SlicerMillennia14 in.Brisket and large roasts
    Millennia 12-inch Serrated SlicerMillennia12 in.Crusty loaves and bark
    Genesis 6.5-inch Carving ForkGenesis6.5 in. tinesHolding a roast
    Renaissance 6-inch Carving ForkRenaissance6 in. tinesHolding a roast
    Genesis 7-inch Straight ForkGenesis7 in.Lifting and holding
    Millennia 7-inch Straight ForkMillennia7 in.Lifting and holding
    Millennia 8-inch Straight ForkMillennia8 in.Larger roasts

    Choosing a Mercer Line

    LineConstructionSteel and hardnessHandle
    GenesisForged, with a bolsterHigh-carbon German, 56 ± 1 HRCSantoprene, non-slip when wet
    RenaissanceForged, short bolster, full tangHigh-carbon German, 56 ± 1 HRCTriple-riveted Delrin
    MillenniaStampedHigh-carbon Japanese, 53 to 54 HRCSantoprene and polypropylene, finger guard
    Ultimate WhiteStampedHigh-carbon Japanese, 53 to 54 HRCWhite polypropylene, finger guard
    BPXStamped, ice-hardenedHigh-carbon German, 57 to 58 HRCGlass-reinforced nylon, finger guard

    Care

    • Wash by hand after each use with warm water and a mild soap, then dry with a soft towel. Mercer advises against the dishwasher: heat can break down the handle, and caustic detergent can stain and pit the blade.
    • Do not leave the knife soaking. If chlorine or bleach touches the blade, rinse it off at once.
    • Avoid long contact with aluminum pans or a stainless steel sink, and do not leave the knife standing in condiments held in metal pans. Prolonged contact can cause pitting.
    • Store the knife in a block, on a magnetic bar or in a knife guard.

    Additional Info

    Blade Length (Inches) 11 in.
    Blade Length (mm) 280 mm
    Blade Width (inches) 1.25
    Grind Granton/Kullenschliff
    Steel Type X50CrMoV15
    Rockwell Hardness 56
    Stainless Yes
    Handle Material POM
    Spine Thickness (mm) 2.05
    Brand Mercer
    Country of Manufacture Taiwan
    SKU M23720
    Manufacturer's Part Number M23720
    Manufacturer's Suggested Retail Price $66.78

    Write Your Own Review

    You're reviewing: Mercer Renaissance 11-inch Granton Edge Slicer