You have no items in your shopping cart.
Yanagi / Sujihiki
One of the traditional Japanese shapes, Yanagi knives are similar to carvers in appearance but can be distinguished by their long thick spines, prominent shinogi lines, and concave back sides. The westernized version of this form is known as Sujihiki. Flat ground and never more than 3mm in width, Sujihiki knives have long, thin, pointed blades that are very comparable to carving knives in both appearance and application.
Sujihikis (also known as Sujibikis) are commonly made in both carbon and stainless steels. Yanagis (also known as Yanagibas) are more commonly made in Carbon Steel. We do have a selection of Stainless Steel Yanagis as well. You can browse our selection of Stainless Steel Yanagis here.
-
Kikuichi Kokaji White Carbon 9.4-inch (240mm) Kiritsuke Yanagi
Kikuichi’s Kokaji knives are completely hand forged by the Kokaji-kai knife makers in Sakai, and this 9.4-inch (240mm) yanagi gives the classic sashimi knife an angled kiritsuke tip. Kikuichi points to the line’s geometry, edge retention and eye-catching kiritsuke tip, and each blade is hand engraved with the Kikuichi chrysanthemum.The single-bevel White #2 carbon edge at 61 to 62 HRC slices raw fish in one smooth pull, and the angled tip is useful for fine scoring and detailed garnish work. This is a knife for an experienced sushi cook or a collector who wants a hand-forged Sakai blade made in the traditional way, and it ships with a saya. Like any traditional carbon knife, it should be dried and oiled after use and sharpened on whetstones.
From the Same MakersThe Kokaji White Carbon 8.25-inch (210mm) Kiritsuke Gyuto brings the same steel and tip to a double-bevel chef’s knife. Learn More$440.00 -
Global Classic 10-inch Sujihiki
A sujihiki is the Japanese answer to the Western slicer: a long, narrow blade ground on both sides, made to slice fish and boneless meat in a single drawing stroke. The G-47 brings that shape to the Global Classic line with a 25 cm blade.The length lets the knife draw through a block of tuna, a salmon fillet or a beef tenderloin in one motion, which leaves a smooth, clean face on each slice. The narrow blade has little surface for food to drag against. It carves boneless roasts for the table and slices terrines neatly.Because the edge is ground on both sides, the G-47 works equally well in the right or left hand and can be sharpened like any other double-bevel knife, which makes it the practical choice for a cook who wants a sashimi-length slicer without the upkeep of a single-bevel yanagi.
Sujihiki or Yanagi?The Global Classic 10-inch Yanagi Sashimi Knife is single-bevel and right-handed. It produces a finer cut on raw fish but takes whetstone skill to maintain. Choose the G-47 for versatility and easier care. Global lists the blade at 25 cm, which retailers often round to 10 inches; it measures 9.8 inches. Our guide to sujihiki, yanagi and other knife shapes explains the differences. Learn MoreRegular Price: $179.95
Special Price $143.96
-
Global Classic 12-inch Yanagi Sashimi Knife
At 30 cm, the G-14R is the length used behind sushi counters, where whole loins of tuna and full sides of salmon are portioned and sliced through service. The extra reach lets one long pull carry through a wide block of fish, so every slice has a single clean face.Like all yanagi, it is ground on one side, with a slightly hollow back that helps each slice release from the blade. The cook draws the knife from heel to tip without pressing down, letting the length do the work. That technique matters more here than with shorter slicers, and the long blade needs a large board and some practice to control.This knife is right-handed and is sharpened on whetstones only. For a kitchen that slices raw fish every day, it also saves the oiling a carbon steel yanagi requires.
12-inch or 10-inch?For home sushi and smaller fillets, the Global Classic 10-inch Yanagi Sashimi Knife is easier to handle. If you want a long slicer that works in either hand and sharpens like a Western knife, choose the Global Classic 10-inch Sujihiki. The Knife Merchant guide to knife shapes covers single-bevel Japanese knives. Learn MoreRegular Price: $229.95
Special Price $183.96
-
Kikuichi Kasumitogi Series 10.6-inch (270mm) Yanagi
Kikuichi describes Kasumitogi as another single-bevel traditional series, hand forged in the sword-making tradition from two pieces of steel, and shoppers search for it as the Kikuichi Kasumitogi yanagi. This 10.6-inch (270mm) yanagi is the long professional size, made for slicing whole fish loins and large blocks of tuna in a single draw.The edge is White #3 carbon steel at 57 to 60 HRC, a little softer than the White #2 of Kikuichi’s Kasumi series. A softer edge sharpens more quickly on whetstones, which makes this a practical working knife for a busy sushi counter where knives are touched up daily. The long blade suits experienced cooks with room to work, and Kikuichi supplies the Kasumitogi series without a saya.
Kasumitogi or Kasumi?For a harder White #2 edge, see the Kasumi 9.4-inch (240mm) Yanagi. A double-bevel slicer at 270mm is the GC Series Carbon Steel 10.6-inch (270mm) Sujihiki. Learn More$345.00 -
MAC Japanese Series 10.25-inch Left-Handed Yanagiba
A single-bevel knife only cuts properly in the hand it was ground for, so left-handed sushi cooks need a mirror-image blade. The FKW-9L is MAC’s 10.25-inch yanagiba ground for the left hand, in stainless steel.The MAC Japanese Series left-handed yanagi is an excellent choice and is very well priced. It is used for slicing and filleting fish, and for prosciutto, carpaccio, ham, roast beef, chicken, tomatoes and garnishes. The bevel sits on the left face, so the flat back faces the fish block when held in the left hand and each slice separates cleanly from the block.A matching left-handed wooden sheath is sold separately; the right-handed sheath does not fit this blade. Right-handed cooks should choose the FKW-9. Our guide to kitchen knife shapes describes the yanagi shape. Learn More$214.95 -
MAC Japanese Series 10.25-inch Yanagiba
Sashimi is cut with a single long pull, and the yanagiba is built for that cut: a long, narrow blade sharpened on only one side. The MAC FKW-9 is a 10.25-inch right-handed yanagiba in stainless steel, so a sushi cook gets the traditional shape without the rust care a carbon steel blade needs.Besides raw fish, it slices prosciutto, carpaccio, ham, roast beef and chicken thinly, and its edge cuts tomatoes and garnishes cleanly. The single bevel lets the blade separate a slice from the block with less tearing than a double-bevel knife, which leaves a glossy cut face on tuna and salmon.A fitted wooden sheath (saya) is sold separately. Left-handed cooks should choose the FKW-9L. For a shorter or longer blade, see the 8.25-inch FKW-7 or the 11.5-inch FKW-10. Our Kitchen Knife Shapes guide explains the yanagi. Learn More -
Masahiro Traditional Carbon 9.4 in. (240mm) Yanagi
The Masahiro Traditional Carbon 9.4 in. (240mm) Yanagi is most commonly used for slicing fish. The blade is not meant for heavy duty butchering tasks, and shouldn't be used on bones. Learn More$117.25 -
Masahiro Traditional Carbon 10.5 in. (270mm) Yanagi
The Masahiro Traditional Carbon 10.5 in. (270mm) Yanagi is most commonly used for slicing fish. The blade is not meant for heavy duty butchering tasks, and shouldn't be used on bones. Learn More -
Masahiro Traditional Carbon Yanagi 330mm
The Professional’s Standard for One-Stroke Sashimi Mastery When working at a high-volume sushi station, the difference between a good cut and a world-class presentation lies in the length of the draw. The Masahiro Traditional Carbon 13-inch (330mm) Yanagi is not just a knife; it is a specialized instrument built for the 'one-stroke' technique. At 330mm, this blade provides the necessary runway to slice through large loins of Maguro (Tuna) or Hamachi in a single, fluid pulling motion. This prevents the 'sawing' effect that damages the delicate cellular structure of the fish, ensuring a glass-like surface and superior mouthfeel. Crafted from Yellow Paper Steel (Kigami), this blade offers a pure carbon steel experience. It sharpens to a surgical level of keenness that stainless steels simply cannot match. The traditional Urasuki (concave) grind on the back side creates an air pocket during the cut, significantly reducing drag and preventing the fish from sticking to the blade. This is a tool designed for the professional who demands precision during a 12-hour shift where speed and aesthetic perfection are equally weighted. The 330mm length is specifically chosen by senior sushi chefs because it allows for the processing of larger species without repositioning the knife. While a 240mm or 270mm Yanagi might struggle with a thick sakudori (block) of tuna, this 13-inch powerhouse glides through with ease, making it the definitive choice for fine-dining environments and busy sushi bars. Learn More$242.50 -
Masahiro Traditional Carbon Left Handed 8.25 in. (210mm) Yanagi
Surgical Precision for the Left-Handed Saucier and Sushi Chef For the left-handed professional, finding a true single-bevel blade that doesn't compromise on geometry is a constant challenge. The Masahiro Traditional Carbon 210mm Yanagi is the definitive answer. Crafted in Seki, Japan, this blade is purpose-built for the unique mechanics of left-handed pull-slicing. Unlike converted right-handed blades, this Yanagi features a proper Urasuki (concave) back side, creating an air pocket that prevents fish from sticking to the blade during delicate service. At the heart of this tool is Yellow Paper (Kigami) steel. For the seasoned chef, this means a knife that takes a terrifyingly sharp edge with minimal time on the stones. While it requires the disciplined care of a carbon steel tool—immediate drying and occasional oiling—the payoff is a level of sharpness that stainless alloys simply cannot match. The 210mm (8.25 inch) length is the 'goldilocks' size: agile enough for tight garnish work and small-plate sashimi, yet possessing enough runway for clean, single-stroke cuts through medium-sized fillets like Hamachi or Sake. This knife is designed for the high-intensity environment of a professional sushi bar or a fine-dining crudo station. The Ho-wood handle provides a lightweight, natural grip that remains secure even when hands are wet, ensuring you maintain absolute control over the blade's trajectory through every slice. Learn More$152.25
