Global Classic 12-inch Yanagi Sashimi Knife

At 30 cm, the G-14R is the length used behind sushi counters, where whole loins of tuna and full sides of salmon are portioned and sliced through service. The extra reach lets one long pull carry through a wide block of fish, so every slice has a single clean face.

Like all yanagi, it is ground on one side, with a slightly hollow back that helps each slice release from the blade. The cook draws the knife from heel to tip without pressing down, letting the length do the work. That technique matters more here than with shorter slicers, and the long blade needs a large board and some practice to control.

This knife is right-handed and is sharpened on whetstones only. For a kitchen that slices raw fish every day, it also saves the oiling a carbon steel yanagi requires.


12-inch or 10-inch?

For home sushi and smaller fillets, the Global Classic 10-inch Yanagi Sashimi Knife is easier to handle. If you want a long slicer that works in either hand and sharpens like a Western knife, choose the Global Classic 10-inch Sujihiki. The Knife Merchant guide to knife shapes covers single-bevel Japanese knives.

SKU: G-14R

Availability: In stock

Regular Price: $229.95

Special Price $183.96

  • Details

    Specifications

    • Blade length: 11.8 inches (30 cm), sold by Global as a 12-inch knife
    • Spine thickness: 0.12 inch (3 mm)
    • Steel: Cromova 18 stainless steel (chromium, molybdenum and vanadium, with 18% chromium), ice-tempered and hardened
    • Hardness: 56 to 58 HRC
    • Edge: single bevel, right-handed, with a hollow-ground (urasuki) back
    • Handle: hollow stainless steel, weighted with sand for balance and textured with Global’s dimple pattern
    • Origin: Made in Japan by Yoshikin
    • Item number: G-14R
    • Warranty: Global guarantees its products against defects in material, construction and workmanship for the original purchaser when bought from an authorized dealer. Chips, broken tips and rust caused by inadequate care are not covered

    Comparing Global Slicing Knives

    KnifeBladeEdgeBest suited to
    10-inch Sujihiki (G-47)9.8 in. (25 cm)Double bevelFish and boneless roasts, either hand
    10-inch Yanagi Sashimi Knife (G-11R)9.8 in. (25 cm)Single bevel, right-handedSashimi and sushi at home
    12-inch Yanagi Sashimi Knife (G-14R)11.8 in. (30 cm)Single bevel, right-handedLarge loins, sushi counters
    8.5-inch Forged Carving Knife (GF-37)8.7 in. (22 cm)Double bevel, drop-forgedTurkey, ham and roasts

    Tips for Best Results

    • Slice in one long pulling stroke from heel to tip instead of sawing back and forth.
    • Keep the edge away from bones, skin with scales and frozen fish.
    • Cut on wood or plastic. Glass, stone, marble and tile surfaces damage the edge.

    Care

    • Wash by hand with warm water and a mild detergent, rinse, and dry with a towel right away. Global advises against the dishwasher.
    • Sharpen on whetstones only. Hold the front bevel at its existing angle and lay the hollow back flat on the stone to remove the burr.
    • Pull-through and two-stage sharpeners are made for double-bevel edges and are not suitable for this knife.

    Additional Info

    Blade Length (Inches) 11.8 in.
    Blade Length (mm) 300 mm
    Blade Width (inches) No
    Grind Urasuki Chisel
    Steel Type Cromova 18
    Rockwell Hardness 56-58
    Stainless Yes
    Handle Material Stainless Steel
    Spine Thickness (mm) 3
    Brand Global
    Country of Manufacture Japan
    SKU G-14R
    Manufacturer's Part Number G-14R
    Manufacturer's Suggested Retail Price $300.00

    Write Your Own Review

    You're reviewing: Global Classic 12-inch Yanagi Sashimi Knife