You have no items in your shopping cart.
Knives
How would you like to shop?

Chef's Knives
Chopping, slicing, and mincing

Santoku Knives
Japanese all-purpose blade

Paring Knives
Peeling and detail work

Utility Knives
Sandwiches and small produce

Bread Knives
Crusty loaves and soft bread

Carving and Slicing
Roasts, ham, and brisket

Boning Knives
Removing meat from the bone

Knife Sets
Outfitting a kitchen or giving a gift
Shop All Shapes
Fillet, nakiri, yanagi, cleavers, steak, oyster, and every other shape we carry
European Makers
Professional and Commercial
Not sure where to start?
What will you cut most often?
What is your budget per knife?
Which edge style do you want?
All Knives
-
Victorinox 2.75-inch New Haven Curved Tip Oyster Knife
This 2.75-inch New Haven oyster knife is particularly useful for oysters whose top shell is smaller than the bottom at the hinge. Those can be difficult to pry at the hinge as you would other oysters.The curved tip lets you catch the lip of the top shell and lever against the bottom shell for an easy, clean opening. The short, sturdy blade keeps the leverage close to the hand.Set the oyster in a towel with the hinge toward you, hook the curved tip under the edge of the top shell and rotate the knife to lift it. Then run the blade along the inside of the top shell to cut the muscle.Rinse the knife in fresh water after use.For a straight pointed tip, see the Victorinox 2.75-inch Providence Style Oyster Knife. For larger oysters, the Victorinox 4-inch Galveston Oyster Knife. The table in the Details compares the shucking knives. Learn More$20.00 -
Victorinox 3-inch Boston Style Oyster Knife
The Victorinox 3-inch Boston oyster knife is good for many oyster types. The shorter blade adds strength, and it is narrow enough to use on curly shells. If you want just one knife for anything from Olympias to Gulf oysters, this would be the choice.The narrow blade slips into a tight hinge, and the 3-inch length still reaches across the shell to cut the muscle in one pass. It is a sensible first oyster knife for home shuckers.Work the tip into the hinge and twist to pop the shell, then slide the blade along the inside of the top shell. Keep the oyster level so the liquor stays in the cup.Rinse it after each session and dry it.For deep, fluted Pacific oysters, the Victorinox 4-inch Boston Oyster Knife has more reach. The Victorinox 2.75-inch Providence Style Oyster Knife is shorter and stronger. The table in the Details compares the shucking knives. Learn More$20.00 -
Victorinox 4-inch Galveston Oyster Knife
The Victorinox Galveston oyster knife has a strong blade and a red handle with a good grip. It is best suited for thick, smooth-shelled Atlantic and Gulf oysters, where the shell is hard and the hinge takes force to open.The wide, sturdy blade levers the hinge open without bending, and the 4-inch length reaches across a large Gulf oyster to cut the muscle in one pass. It is built for shucking by the dozen at a raw bar or an oyster roast.Set the oyster in a towel with the hinge toward you, drive the tip into the hinge and twist firmly. Then slide the blade along the inside of the top shell to cut the muscle and free the oyster.For thin, fluted shells, the Victorinox 4-inch Boston Oyster Knife works better. For a short all-rounder, see the Victorinox 3-inch Boston Style Oyster Knife. The table in the Details compares the shucking knives. Learn More$21.00 -
Victorinox 4-inch Boston Oyster Knife
The 4-inch Victorinox Boston oyster knife is ideally suited to delicately shelled oysters from the Pacific Northwest. The thin, long tip works well with fluted shells, and the long blade makes it easy to slice the adductor muscle and free the oyster.Deep-cupped Pacific oysters have thin, layered shells that crumble under a blunt knife. The narrow tip finds the hinge without breaking the shell, and the length reaches across a large oyster in one stroke.Work the tip into the hinge and twist, then run the blade along the inside of the top shell and under the oyster. Hold the shell level to keep the liquor.A towel or a cut-resistant glove protects the hand holding the shell, and the Details explain safe shucking.For a shorter, all-round blade, see the Victorinox 3-inch Boston Style Oyster Knife. For thick Gulf oysters, the Victorinox 4-inch Galveston Oyster Knife is stronger. The table in the Details compares the shucking knives. Learn More$21.00 -
Victorinox 3.25-inch Narrow Clam Knife
The Victorinox narrow clam knife works for all clams but is particularly useful for opening smaller sizes such as littlenecks and Manila clams. The blue handle lets you quickly tell the clam knife apart from your oyster knives.A clam knife has a sharpened edge that slips between the two shells instead of prying at the hinge. The narrow blade opens the clam cleanly without piercing the meat.Hold the clam in a towel with the hinge against your palm, set the edge in the seam opposite the hinge and squeeze the blade in with your fingers. Run the blade along the top shell to cut the muscles, then under the clam.Chill clams well before opening; cold clams relax and open more easily. Rinse the knife in fresh water after use and dry it.For large clams, see the Victorinox 3.5-inch Wide Clam Knife. The table in the Details compares the shucking knives, including the oyster knives. Learn More$13.00 -
Victorinox 3.5-inch Wide Clam Knife
The Victorinox 3.5-inch wide clam knife has a broad blade for leverage and control, which makes quick work of large cherrystone and chowder clams. Its blue handle sets it apart from oyster knives at a glance.The sharpened edge slips into the seam between the shells, and the width of the blade gives a solid surface to push against as you work it in. It cuts the muscles cleanly so the clam comes free whole.Hold the clam in a towel with the hinge against your palm, set the edge in the seam and squeeze it in with your fingers rather than stabbing. Cut along the top shell, then under the clam.Chill the clams well before opening; cold clams relax and the seam is easier to find. Rinse the knife in fresh water after use and dry it before storing.For small clams, the Victorinox 3.25-inch Narrow Clam Knife fits a tighter seam. The table in the Details compares all Victorinox shucking knives. Learn More$15.00 -
Dexter-Russell Sani-Safe 12-inch Diamond Sharpening Steel
A diamond steel does more than realign an edge. It removes a little metal, so it can bring back an edge that a smooth or regular steel no longer revives. Dexter-Russell calls the DDS-12 a diamond sharpener and intends it for routine edge maintenance between more intensive sharpenings, in professional kitchens, butcher shops and meat-processing operations.The oval shape gives the most sharpening surface area along the 12-inch length. Use a light touch, since diamond cuts faster than steel.
Diamond or Smooth Steel?For daily honing that removes almost no metal, the Sani-Safe 12-inch Smooth Butcher Steel is the gentler choice. Learn More$50.99 -
Dexter-Russell Traditional 8-inch Chinese Chef's Knife, Carbon Steel
The 5178 is Dexter-Russell’s carbon steel Chinese chef’s knife, with a full 8 x 3.25 inches of blade. It is the most visited Chinese cleaver on our site, and cooks search for it by its model number. Bon Appétit, Wirecutter and Randy Lau of Made With Lau are among those who recommend it.Dexter’s list of jobs for it runs from crushing and mincing to slicing. The broad blade smashes garlic and ginger and carries food from the board to the wok. It is a mainstay in Asian and Caribbean cooking, where it handles every cutting job, even peeling ginger and potatoes. Bone calls for a heavy meat cleaver, so keep this one to vegetables and boneless meat. A carbon edge gets very sharp and is easy to restore, and it will rust and discolor if left wet, so it rewards cooks who dry it after use. Dexter’s Traditional knives have a long following in the Northeast, close to the Southbridge, Massachusetts factory where Dexter has made knives since 1818.
Carbon or Stain-Free?For a stain-free blade in the same size, see the Traditional 8915 or the Duo-Edge S5198GE. Learn More$40.85 -
Dexter-Russell Traditional 7-inch Chinese Chef's Knife
At 7 x 2 inches, the S5197 is a narrower, lighter take on Dexter-Russell’s Chinese chef’s knife, and it suits cooks who want the shape without the size of the 8-inch models. Dexter rates it for vegetables, herbs and fruit as well as boneless meat.The flat blade still crushes garlic and scoops ingredients into a pot or wok. The smaller blade is easier to control for thin slicing and quicker to maneuver on a home cutting board, and it fits a knife block slot that a full-size cleaver would not. It is a good first Chinese chef’s knife for a cook who is new to the style and wants to learn the push cut and the scoop. Cooks search our site for it by its model number, and it comes from Dexter’s factory in Southbridge, Massachusetts. The stain-free steel resists the micro-chipping often seen in harder, more brittle Japanese steels.
7-inch or 8-inch?For more blade height and reach, the Traditional 8915 is the classic full-size version, and the Duo-Edge S5198GE adds hollows that help slices release. Learn More$42.60 -
Dexter-Russell Traditional 8-inch Chinese Chef's Knife, Rosewood
Dexter-Russell’s Chinese chef’s knives are the cleavers many cooks picture when they think of the shape, and the 8915 is the classic full-size Traditional version. Shoppers search for it by that model number and by the name Chinese cleaver.Dexter describes it as a knife for cutting soft vegetables, fruits and meats. The tall blade does more than slice. It moves chopped ingredients from the board to the pan, and its flat side smashes garlic and ginger. It resembles a cleaver but is thinner than a meat cleaver, so keep it away from bone. The design has a long history in home kitchens and Chinese restaurant kitchens alike, and it rewards practice with fast, even slicing.
Choosing a Chinese Chef’s KnifeThe Duo-Edge S5198GE adds hollows that keep slices from sticking, and the 7-inch S5197 is a narrower, lighter option. The table below compares every Dexter Chinese chef’s knife we carry. Learn More$64.65
