Knives
How would you like to shop?

Chef's Knives
Chopping, slicing, and mincing

Santoku Knives
Japanese all-purpose blade

Paring Knives
Peeling and detail work

Utility Knives
Sandwiches and small produce

Bread Knives
Crusty loaves and soft bread

Carving and Slicing
Roasts, ham, and brisket

Boning Knives
Removing meat from the bone

Knife Sets
Outfitting a kitchen or giving a gift
Shop All Shapes
Fillet, nakiri, yanagi, cleavers, steak, oyster, and every other shape we carry
European Makers
Professional and Commercial
Not sure where to start?
What will you cut most often?
What is your budget per knife?
Which edge style do you want?
All Knives
-
Minonokuni Homura 5.9-inch (150mm) Petty Knife
The Homura 150mm petty is a small utility knife for the jobs a gyuto is too large for. It trims boneless meat, peels fruit and handles garnish work, and it fits comfortably in the hand for peeling off the board.Like the rest of the Homura line, it has a blue steel edge inside a stainless jacket, so only the very edge needs the care of carbon steel. That makes it a practical first carbon-edged knife for a cook who wants to see how blue steel behaves before buying a larger one.
Matching It to a Larger KnifeThe petty pairs naturally with the Homura 210mm gyuto or the Homura 170mm santoku. For a petty with a Damascus finish, see the Aogami Damascus 150mm petty, which has an iron jacket and needs more attention to stay free of rust.The fine tip is the most delicate part of a blue steel blade. Keep it off bones and frozen food, and do not use the tip to pry. The kitchen knife shapes guide covers utility knives. Learn More -
Made In 2-Piece Japanese Damascus Steel Knife Set
The Made In 2-Piece Japanese Damascus Steel Knife Set pairs the two blades that cover most of a home cook’s prep: the gyuto for meat, fish, and general cutting, and the nakiri for vegetables. Both are forged in Seki, Japan, with VG-10 cores inside 66 layers of Damascus steel, so they share the same sharp 15-degree edge, balance, and hand-finished handles.
What Each Knife Does8-inch gyuto: The all-purpose blade for slicing proteins, dicing onions, and mincing herbs.6.6-inch nakiri: A tall, flat-edged vegetable knife that makes clean straight-down cuts through onions, carrots, and cabbage.
Why It PerformsMatched steel and edges: Both knives share the same VG-10 core and 15-degree edge, so they cut and sharpen the same way.Two complementary shapes: The gyuto handles slicing and rocking cuts; the nakiri handles push cuts and chopping.Full tang, polymer handles: Balanced knives with handles that resist slipping and staining.
Choosing the Right Made In SetFor a third, more compact all-purpose blade, the Made In 3-Piece Japanese Damascus Steel Knife Set adds the santoku. Each knife is also sold on its own: the Made In 8-inch Japanese Damascus Steel Gyuto and the Made In 6.6-inch Japanese Damascus Steel Nakiri. Learn More -
Made In 3-Piece Japanese Damascus Steel Knife Set
The Made In 3-Piece Japanese Damascus Steel Knife Set gives you the three classic Japanese kitchen shapes in one matched set. The gyuto handles slicing and general prep, the santoku is a nimble everyday blade, and the nakiri is built for vegetables. All three are forged in Seki, Japan, with VG-10 cores inside 66 layers of Damascus steel and 15-degree edges.
What Each Knife Does8-inch gyuto: The longest blade, for slicing meat and fish and for larger prep jobs.6.6-inch santoku: A compact all-purpose knife with a flat edge and rounded tip for push cuts.6.6-inch nakiri: A tall, flat vegetable knife for clean straight-down chopping.
Why It PerformsOne steel, one edge: All three share the VG-10 core and 15-degree edge, so they cut and sharpen alike.Three shapes, three cutting styles: Rocking, push cutting, and straight chopping are each covered by the shape best suited to them.Full tang, polymer handles: Balanced knives with handles that resist slipping and staining.
Choosing the Right Made In SetIf you want only a chef’s knife and a vegetable knife, the Made In 2-Piece Japanese Damascus Steel Knife Set includes the gyuto and nakiri. Each knife is also sold individually: the Made In 8-inch Japanese Damascus Steel Gyuto, the Made In 6.6-inch Japanese Damascus Steel Santoku, and the Made In 6.6-inch Japanese Damascus Steel Nakiri. Learn More -
Made In 6.6-inch Japanese Damascus Steel Nakiri
A nakiri is a Japanese vegetable knife with a tall, rectangular blade and a fully flat edge. Because the whole edge meets the board at once, each straight downward cut separates an onion slice or a stack of greens completely, without the connected strands a curved edge can leave. The Made In 6.6-inch Japanese Damascus Steel Nakiri is built for that kind of chopping.The tall blade keeps knuckles clear of the board and doubles as a scoop for carrying chopped vegetables to the pan. It is a push-cutting knife, so cooks who rock a blade through herbs will find the flat edge takes some adjustment.
Nakiri, Santoku or Gyuto?The 6.6-inch Japanese Damascus Santoku keeps a flat edge but adds a rounded tip for meat and fish, and the 8-inch Japanese Damascus Gyuto is the full-size all-purpose knife. Choose the nakiri if most of your prep is produce. Our Kitchen Knife Shapes guide covers the nakiri alongside the usuba, its single-bevel relative. Learn MoreRegular Price: $199.00
Special Price $169.95
-
Made In 6.6-inch Japanese Damascus Steel Santoku
Santoku is usually translated as “three virtues,” for slicing, dicing and mincing. The Made In 6.6-inch Japanese Damascus Steel Santoku packs that range into a blade shorter than a chef’s knife, which is easier to control on a small board or in a smaller hand.Its flat edge and rounded tip suit forward push cuts through vegetables and boneless proteins, with enough curve near the tip to mince garlic. The blade is tall enough to scoop up what has been cut.
Santoku or Gyuto?The 8-inch gyuto gives more length for slicing roasts and large squash, and the nakiri is the specialist for vegetables. For a Western blade from Made In, the 8-inch Olive Wood Chef Knife is forged in France with a curved edge for rocking. Our overview of kitchen knife shapes compares all of them. Learn More$199.00 -
Made In 8-inch Japanese Damascus Steel Gyuto
A gyuto is the Japanese form of the chef’s knife, the blade a cook reaches for first for most prep. The Made In 8-inch Japanese Damascus Steel Gyuto has a thin blade and a fairly flat edge profile, so it suits push and pull cuts through onions and carrots, and still rocks gently for mincing.It handles proteins as well as produce. A thin edge slices a roast without tearing the crust and portions fish cleanly. The hard stainless core holds a finer edge than Made In’s French-made knives, and the layered Damascus cladding gives each blade its own grain pattern.
Gyuto, Santoku or Nakiri?The 6.6-inch Japanese Damascus Santoku has a shorter blade and a flatter edge for straight up-and-down chopping, and the 6.6-inch Japanese Damascus Nakiri has a squared tip made for vegetables. Choose the gyuto if you want one knife for both proteins and produce. For a Western-style blade with a slightly wider edge angle, see the French-made Made In 8-inch Forged Olive Wood Chef Knife. Our guide to kitchen knife shapes explains how these profiles differ. Learn MoreRegular Price: $239.00
Special Price $199.95
-
MAC Japanese Series 6.5-inch Nakiri
A nakiri has a straight edge from heel to tip, so the whole edge meets the board at once and cuts all the way through a carrot or a scallion without the accordion effect of a curved blade. The MAC JU-65 is a 6.5-inch nakiri for cooks who prep a lot of vegetables.The thin, light blade makes clean, straight cuts for julienne, chiffonade of greens and paper-thin cucumber. The square tip is safe to work with and gives a broad face for carrying prep to the pan.For a nakiri with a bolster, see the Professional MJU-65. For a tall blade with a slight curve, the vegetable cleaver. Our Kitchen Knife Shapes guide explains the nakiri and usuba. Learn More$97.95 -
I.O. Shen 6.7 in (170mm) Boning Knife
This I.O. Shen is longer than most boning knives at 6.7 inches. It can be difficult to find Japanese steel in a Western boning knife shape. The U.S. market tends to use softer steel boning knives requiring regular honing. This is an excellent option for someone who wants better sharpness and edge retention. A unique modified VG10 steel that is tough. I am comfortable recommending this knife for breaking down fish, poultry and meats, removing silver skin, etc. If you are going to be scraping bones for "Frenching" chops and that type of task, go with a softer steel. Learn More$189.95 -
Kyocera Universal Soft-Touch Round Knife Block, Black
Fixed-slot knife blocks dictate which knives fit where, and a santoku or nakiri can end up in a slot cut for a chef’s knife. Kyocera’s Universal Knife Block has a slotted top that accepts blades of different widths in any position, so a mixed set of ceramic and steel knives stands upright together. Kyocera rates it for six to eight knives.The round body takes little counter space, which suits a narrow strip of counter beside the stove. Its slots are gentle on edges, a real advantage for ceramic knives, which can chip if they knock against a hard surface. The black exterior has a soft-touch finish.Customers ask whether we are an authorized Kyocera dealer before buying. We are, and our blocks come through Kyocera’s authorized distribution.
Filling the BlockThe Kyocera Innovation Black 4-Piece Ceramic Knife Set fills half the capacity, leaving room for a paring knife such as the Innovation Black 3-inch Paring Knife and a few steel knives. For a stainless steel exterior, see the Kyocera Universal Stainless Steel Knife Block. Learn More -
Kyocera Universal Round Knife Block, Stainless Steel
Knife collections come in mixed shapes, and the fixed slots of a traditional block do not always fit them. This stainless steel version of Kyocera’s Universal Knife Block replaces fixed slots with a slotted top that holds knives of varied widths wherever they are placed, from a slim paring knife to a broad nakiri. Kyocera puts the capacity at six to eight knives.Its stainless exterior suits kitchens with steel appliances and wipes clean easily. The compact round footprint leaves the counter open, and the slotted top protects edges as knives go in and come out, which matters with ceramic blades that chip on hard contact. The top lifts out for cleaning.Knife Merchant is an authorized Kyocera dealer, a question customers raise before ordering. The block ships from Kyocera’s authorized supply.
Stainless or Soft-Touch?The black Soft-Touch Universal Knife Block has the same slotted top with a soft-touch black exterior. Either one holds the Innovation Black 2-Piece Set with room to spare for the knives you add later. Learn More$34.95
