Knives

Items 11 to 20 of 140 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Minonokuni Take 10.6-inch (270mm) Yanagiba

    Slicing fish for a full dining room calls for a longer knife, and the 270mm yanagiba adds that length without moving to the largest sizes. A wide block of fish can be sliced from heel to tip in one smooth draw, which keeps the surface of each piece glossy and intact.The added length also means added weight toward the tip. Let that weight carry the blade through the fish, and keep the grip relaxed. A cook used to a 240mm will need a few sessions to adjust to the longer stroke.
    The Take LineTake uses white steel, a fine-grained carbon steel that sharpens quickly and holds an edge well in a working kitchen. It is less brittle than the blue steel Matsu 270mm yanagiba, and so suits cooks who are confident with sushi but not yet experts at maintaining a single-bevel edge.Shorter and longer options are the Take 240mm and Take 300mm. Left-handed cooks can order the Take 270mm left-handed yanagi. For more on slicers, see the knife shapes guide. Learn More
  • Shun Kanso 12-inch Hollow Ground Brisket Knife

    Shun calls this 12-inch Kanso knife ideal for trimming and slicing large cuts of meat such as brisket and holiday roasts. The long blade draws through a whole brisket flat in one stroke, and hollow-ground indentations reduce sticking so each slice falls away intact.A wooden saya, or sheath, is included to protect the edge between barbecues. A rustic Heritage finish suits a knife that spends its life beside a smoker. It is the centerpiece of the Kanso BBQ set and a fine gift for a pitmaster.
    The BBQ SetThe Kanso 4-Piece BBQ Set adds two smaller knives and a knife roll. Learn More
  • Kikuichi GM Series Molybdenum Stainless Steel 10.6-inch (270mm) Sujihiki

    Molybdenum series has a high content of Molybdenum steel providing a razor sharp edge. The 10.6 in. (270mm) Sujihiki is ideal for slicing and carving, particularly for making very thin slices. Learn More
  • MAC Chef Series 11.25-inch Slicer

    The SL-115 is the longest and narrowest slicer MAC makes, an 11.25-inch Chef Series blade for carving hams, turkeys, roasts and brisket, and for filleting fish and slicing sashimi. Professional seafood processors, including Sunh Fish, rely on the SL-115 to process fish.An extra-long blade allows a full slice in one continuous stroke, which keeps the texture of brisket and raw fish intact. Because the blade is narrow and light, it is easy to control along the bones of a large fish and around the curve of a ham.For a heavier slicer, compare the Ultimate SKS-105 or the Professional MSL-105. Our guide to kitchen knife shapes explains slicers and sujihiki. Learn More
  • MAC Ultimate 10.25-inch Slicer

    The SKS-105 is the slicer for cooks who like the weight of the Ultimate chef’s knives: a 10.25-inch blade with the larger bolster of the series. Its length suits large roasts, and its edge handles filleting and slicing fish.The weight carries the blade through a prime rib or a ham with very little downward pressure, which keeps slices even. For raw fish, the long edge lets you slice salmon or tuna in one pull.For a lighter slicer, see the Professional MKS-105 or the Chef Series SL-115. Our guide to knife shapes compares carving knives and sujihiki. Learn More
  • Minonokuni Gin-San 10.6-inch (270mm) Yanagi

    The longest Gin-San yanagi is meant for cooks who slice wide blocks of fish for a dining room and want a blade that will not rust between orders. At 270mm, it finishes a slice of salmon or tuna in one long stroke, with length to spare on broader fish.The knife is hand-forged by Minonokuni craftsmen in the kasumi method, with the hard Gin-san edge steel jacketed in a softer stainless steel. That softer jacket is what makes it practical to hammer such a hard steel into a traditional single-bevel blade, and it also makes the knife easier to sharpen than a solid hard blade.
    Where It FitsGin-san is a specialty line, technically more premium than Matsu, Take or Ume, but not the right choice for everyone. A long blade asks for a steady hand and room on the board. A cook who wants this length in carbon steel can compare the Take 270mm yanagiba or the Matsu 270mm yanagiba.Shorter Gin-San yanagi are the 210mm and 240mm. For more on the yanagi, see our kitchen knife shapes guide. Learn More
  • Kikuichi GC Series Carbon Steel 10.6-inch (270mm) Sujihiki

    Long, single-stroke cuts are the point of a sujihiki, and the 10.6-inch (270mm) GC Series sujihiki gives the most length among Kikuichi’s carbon steel slicers. It carves a whole turkey breast, a prime rib or a side of smoked salmon without sawing, which keeps each slice smooth and even.Kikuichi pitches the GC sujihiki at meat and sushi work, where one clean pull through the food matters more than speed. The 270mm suits carving stations and sushi counters, and it serves home cooks who carve large holiday roasts equally well. Its carbon steel edge is easy to sharpen and should be dried promptly after slicing fish. Because the blade is long and narrow, store it in a saya or a block slot that supports its full length.
    Choosing a Slicer LengthThe 9.4-inch (240mm) Sujihiki is easier to store and maneuver. A stainless slicer of the same length is the Kikuichi Molybdenum 10.6-inch (270mm) Sujihiki. Learn More
  • MAC Ultimate 10.25-inch Chef’s Knife

    The SBK-105 gives a cook the reach of a 10-inch blade with the heaviest bolster in the MAC lineup. It suits professionals and serious home cooks who want a long knife that feels planted on the board, much like a forged German chef’s knife, while keeping a thin edge.Its length handles a whole brisket, a large cabbage or a stack of melons, and the weight near the handle carries the blade through dense food with less pressure from the wrist. On a small board it is more knife than the work needs; the 9-inch SBK-95 is the shorter Ultimate model.Other Long MAC KnivesThe Professional MBK-110 is a lighter long knife with a bolster, and the Chef Series BK-100 is the lightest of all. Read our guide to knife shapes for more on choosing a chef’s knife length. Learn More
  • MAC Superior 10.5-inch Bread and Roast Slicer

    The SB-105 reverses the usual scallop pattern: the half circles extend outward from the edge, rather than being cut into the blade. That edge cuts smoothly through breads, roasts and cakes, and lets the knife double as a meat slicer.With 10.5 inches of blade, it slices a round of sourdough or a rib roast in long, even strokes. The reversed scallops grip a firm crust without tearing a soft interior, and they leave a cleaner surface on cooked meat than conventional serrations.The Professional MSB-105 is the same length with conventional scallops and a bolster. For a shorter bread knife, see the BS-90. Browse the Superior Series, or see our Kitchen Knife Shapes guide. Learn More
  • Minonokuni Sakura Damascus 10.6-inch (270mm) Yanagi

    The 270mm Sakura yanagi gives a long, even stroke for slicing sashimi from broad blocks of fish, and its Damascus jacket makes it as much a statement as a tool. The length completes each slice in one pass, which preserves texture and presentation.A long yanagi rewards a relaxed grip and an unhurried draw. Let the weight of the blade carry it through the fish and the edge do the cutting. On a deep board with room to the side, the length lets the cook set the thickness of each slice precisely.
    Choosing a 270mm YanagiSakura is one of our specialty lines, technically more premium than the standard lines but not the right choice for everyone. Its blue steel core is hard and delicate, so it belongs with an experienced sushi cook. For the same length in a less brittle steel, see the Take 270mm yanagiba. For a stainless option, see the Gin-San 270mm yanagi.The Sakura 240mm yanagi is the standard counter length. Our guide to kitchen knife shapes covers the yanagi. Learn More

Items 11 to 20 of 140 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5