Steel Sharpening Rods

Maintain peak performance and extend the life of your kitchen knives with our high‑quality steel sharpening rods. Essential for honing blades between full stone sharpenings, these rods keep edges aligned and knives performing at their best. We carry a large variety of premium rods in specialized cuts, shapes, and lengths to suit every knife and steel type. Durable and easy to use, they are perfect for home cooks and professional chefs alike, helping you achieve smooth, precise cuts every time.

Items 1 to 10 of 13 total

per page

Page:
  1. 1
  2. 2
  • F. Dick Dickoron Combi 12-inch Square Sapphire and Polished Steel

    Two finishes on one rod give serious meat processors, butchers and fishmongers a choice of edge for the day’s work. On this 12-inch square Dickoron Combi, two opposite faces carry the sapphire cut and the other two are polished.The sapphire faces straighten the edge and give fine honing, leaving a slightly toothier edge that suits slicing fruit and vegetables. The polished faces then finish the blade after sharpening for an extremely smooth, sharp edge that portions proteins cleanly. The square profile makes each face distinct, so it is easy to tell which finish is in use.It replaces two rods at a crowded station.A single polished rod is the Dickoron Polish 12-inch oval steel, and the sapphire cut alone comes on the Dickoron Classic 12-inch oval steel. A smaller combination rod with a non-slip handle is the F. Dick 10-inch square polished and fine cut steel. Learn More
  • F. Dick MultiCut 11-inch Flat Fine and Regular Cut Steel

    The MultiCut has a fine surface for restoring and honing an edge with light strokes, and the edges of its grooves have a grinding effect that takes the shoulder of the edge back when a blunt knife is steeled more firmly. One flat rod handles both upkeep and correction. It is the highest-rated steel we sell.The flat face makes a consistent angle easy to meet. Fine lines align a burred edge and clear away metal flakes for a smooth cut. Keep it out of sight in a busy kitchen, or every cook on the line will want to touch up a knife on it. The handle is balanced against the heavy rod and sealed for clean environments.An oval rod with fine and regular cut is the Dickoron Multiron 12-inch oval steel. A flat fine cut alone is the F. Dick 2000 11-inch flat steel, and the Balkan flat butcher steel has an all-metal handle. Learn More
  • Shun Classic 9-inch Combination Honing Steel

    Honing realigns a knife’s edge between sharpenings, and Shun designed this 9-inch combination steel to match the Shun Classic line. The rod has two surfaces, one smooth and one micro-ribbed, and a 16° angle guide built into the handle sets the knife at the angle Shun uses on its edges.The D-shaped ebony Pakkawood handle matches Shun Classic knives and is comfortable in either hand. A few light strokes keep a Shun edge cutting cleanly and extend the time between professional sharpenings.
    Learn to HoneOur guide to honing steels covers technique. Learn More
  • F. Dick 10-inch Square Polished and Fine Cut Combination Steel

    Four faces give this 10-inch F. Dick combination steel two finishes in one rod, with two polished sides and two fine cut sides. Butchers and meat processors who need to work efficiently can choose the edge for the job without reaching for a second steel.A polished edge is very smooth and suits cutting proteins into even portions. The fine cut sides leave a slightly rougher edge with a little bite, which helps when slicing tomatoes and other fruit and vegetables. The flat faces of the square rod also make it easy to see and hold the angle.It also suits a crowded knife roll.For more correction, the F. Dick 10-inch square regular and fine cut steel pairs a regular cut with a fine cut. A Dickoron version with sapphire and polished faces is the Dickoron Combi 12-inch square steel. A single polished rod is the Poliron 10-inch oval steel. Learn More
  • F. Dick Dickoron Multiron 12-inch Oval Steel

    The Multiron combines a fine cut and a regular cut in one oval rod. Under light pressure it hones smoothly, and with more pressure slight indentations along the rod increase the abrasion to straighten damaged or burred edges.We like this steel at Knife Merchant because you can feel any problem areas on the knife as it passes. A bad spot on the edge announces itself by touch, so the cook knows where to work, and regular use on this rod lets a knife go longer between sharpenings. The cuts are fine and even for a consistent result along the 12-inch length.For a flat rod with fine and regular cuts, the F. Dick MultiCut 11-inch flat steel takes a similar approach. A single fine cut is the EuroCut 12-inch oval fine cut steel, and a finer Dickoron finish is the Dickoron Micro 12-inch Oval Super Fine Cut Steel. Learn More
  • Victorinox 10-inch Combination Cut Honing Steel

    The Victorinox 10-inch combination steel has two sides grooved as a fine cut and two smooth sides for use as a polishing rod. Polishing rods are used by butchers who want to keep a razor edge.We recommend a couple of strokes on the fine side, top and bottom of the blade, then rotating the steel 90 degrees and finishing on the polishing side for a smooth, mirror-finish edge.It is made in Sheffield, England, with a plastic handle and a ring for hanging, and the 10-inch steel fits nicely into a standard knife block. It suits knives up to 8 inches, such as the Fibrox Pro 8-inch Butcher and Fishing Knife.Wipe the rod clean after use. The polishing faces stay smooth only if they are kept free of grit, so store the steel where it will not knock against other tools.For more length, see the Victorinox 12-inch Combination Steel. Our Honing Rod Guide explains polishing steels. Learn More
  • Victorinox 12-inch Combination Cut Honing Steel

    The Victorinox 12-inch combination steel has two sides grooved as a fine cut and two smooth sides for use as a polishing rod. Polishing rods are used by butchers who want to keep a razor edge.We recommend a couple of strokes on the fine side, top and bottom of the blade, then rotating the steel 90 degrees and finishing on the polishing side for a smooth, mirror-finish edge.The 12-inch rod covers knives up to 10 inches, such as the Fibrox Pro 10-inch Butcher Knife, so the whole edge meets the steel on every stroke. It is made in Sheffield, England, with a plastic handle and a ring for hanging.Wipe the rod after use and hang it by its ring.For a shorter rod, see the Victorinox 10-inch Combination Steel. For a polishing surface alone, the Victorinox 10-inch Round Polish Steel. Our Honing Rod Guide explains each cut. Learn More
  • Zwilling Bob Kramer Double-Cut Sharpening Steel

    Zwilling has discontinued production of all Bob Kramer products. This was a highly rated honing rod by America’s Test Kitchen, but we offer similar, if not better, substitute rods that combine fine-cut and smooth surfaces.See the Friedr. Dick combination rods, the F. Dick 10-inch square combination steel and the F. Dick Dickoron 12-inch round combination steel, and the Victorinox combination rods, the Victorinox 10-inch combination steel and the Victorinox 12-inch combination steel. Learn More
  • Shun 9-inch Combination Honing Steel, Steel-Grey Handle

    Shun’s 9-inch combination honing steel keeps knife edges aligned with two surfaces in one rod, a smooth side for regular honing and a micro-ribbed side for more thorough realignment. A built-in angle guide sets the blade at 16°, so even a cook new to honing holds the correct angle.Its steel-grey handle suits any Shun series, which makes it the honing steel to choose for a mixed collection of Shun knives.
    Classic Handle OptionThe Shun Classic Combination Honing Steel has an ebony Pakkawood handle. Learn More
  • Granton 10-Inch Multi-Cut Combination Steel

    The Granton® 10-Inch Multi-Cut Combination Steel is a highly efficient tool for complete blade maintenance, designed for the professional or serious home cook who desires versatility and precision. Forged in Sheffield, England, this single steel effectively combines two distinct surfaces, providing the right tool for any situation—from daily edge alignment to final polishing. Fine-Cut Surfaces: These sides are the workhorse of the steel. They are designed for regular, daily honing to quickly realign a blade's edge that has begun to feel dull or has slightly rolled from use. They effectively restore a sharp cutting feel for continued work. Super-Fine (Polishing) Surfaces: After using the fine-cut side, or for blades that are already in good condition, a few strokes on the super-fine surfaces provide the ultimate refinement. These sides polish the edge, removing the most microscopic imperfections and creating an exceptionally keen, smooth finish that glides through food with minimal resistance. Learn More

Items 1 to 10 of 13 total

per page

Page:
  1. 1
  2. 2