You have no items in your shopping cart.
F. Dick Honing Steels
For the last two hundred years, F. Dick steels have been widely recognized as the best made at world fairs and other competitions. Professional butchers likely have the best understanding of steels, or honing rods. Their work demands they start with a very sharp edge and they hone their knives every ten to fifteen minutes while working. Nearly all butchers use a polished or fine cut steel because they remove a minimum amount of metal from the edge of the knife. They will only realign the existing edge, which is what a steel is designed to do.
Our recommendation is to work with a very fine stone to rebuild your edge and a fine-cut F. Dick steel to keep it straight. When you are working as a carver / butcher, honing your knife four to six times an hour, for a full shift, you will probably want to use a Friedrich Dick polished steel in order to avoid wearing the edge down. Most cooks hone the knife before starting work or after taking it to the sharpening stone. For them, the F. Dick regular cut steel works well. If you keep the knife edge aligned, you won’t have to grind a new edge as often and the knife lasts longer.
-
F. Dick Dickoron Hygienic Combi 12-inch Round Steel
Processing plants that use intensive cleaning agents and methods need a steel that stands up to them, and the Dickoron Hygienic Combi is made for that environment. One 12-inch round rod both sharpens and straightens the edge.Two sides carry a regular cut and two carry an ultra-fine cut. The regular cut faces restore bite to a knife that has gone dull on bone and joints, and the ultra-fine faces then straighten and refine the edge. Working both cuts on one rod saves carrying two steels on the belt.The round rod suits curved boning knives well.The ultra-fine cut alone is the Dickoron Micro 12-inch Oval Super Fine Cut Steel, the steel serious professionals buy most from us. A regular cut rod with a non-slip handle is the F. Dick 12-inch round steel with non-slip handle. Carry it in the F. Dick Knife Scabbard with Belt at the line. Learn More$125.45 -
F. Dick 12-inch Oval Regular Cut Steel
An oval rod gives the knife a broader face to ride on, which makes a steady angle easier to hold, and this 12-inch F. Dick steel pairs that shape with a regular cut. It is F. Dick’s entry point into its sharpening steels, with the same rod quality and a simpler handle.Regular cut grooves straighten and align a beveled edge on most German and American knives and give the edge a little tooth for slicing vegetables. The 12-inch length lets a 10-inch chef’s knife or a long slicer travel the full rod in one stroke. For knives harder than 60 Rockwell, a harder surface such as the Dickoron Titan 12-inch oval steel is a better match.A round version is the F. Dick 10-inch round regular cut steel. With a metal finger guard, the F. Dick 12-inch oval regular cut butcher steel is the next step up, and the EuroCut 12-inch oval regular cut steel is another option. Learn More$49.40 -
F. Dick DarkNitro 12-inch Oval Sharpening Steel
DarkNitro knives are harder than most F. Dick knives, and F. Dick developed this steel to straighten and align their edges. It has a special surface for very high abrasion, which makes it suitable for hard knives in general.The oval rod gives the knife a large contact area, so honing is more effective. The handle sits comfortably and securely in the hand and matches the DarkNitro knives. For a hard Japanese knife or a DarkNitro chef’s knife, it keeps the edge working between sessions on the stones.Light, regular strokes suit a hard edge best, since pressing hard can chip it. A few passes before each cooking session keep a DarkNitro or Japanese knife cutting cleanly, and the stones need to come out less frequently.Pair it with the DarkNitro 8.25-inch chef’s knife or the DarkNitro 7-inch santoku. Another steel for hard knives is the Dickoron Titan 12-inch oval steel, which has a black acrylic handle. Learn More$222.95 -
F. Dick FineCut 12-inch Round Steel with Non-Slip Handle
Repeated contact with a cutting board pushes a sharp edge to one side or the other, and this 12-inch round FineCut steel is made to bring it back into line. About eight strokes on each side are enough to hone a rolled edge back to sharp.The fine cut removes little metal, so the rod can be used whenever the edge needs it without wearing the knife down. F. Dick hardens the rod so the lines keep their depth with use. The round profile follows the curve of boning and breaking knives precisely, and the handle is sealed for use in processing plants.An oval version is the FineCut 12-inch oval steel, which gives a broader face. For knives that need more correction, the 12-inch round regular cut steel with non-slip handle is the coarser sibling. Serious professionals who want a finer finish choose the Dickoron Micro 12-inch Oval Super Fine Cut Steel. Learn More$57.85 -
F. Dick 12-inch Oval Regular Cut Steel with Non-Slip Handle
For traditional German and American knives, a regular cut on an oval rod is a strong match, and this 12-inch F. Dick steel adds a non-slip handle for working professionals. The wider face makes the angle easier to find than on a round steel.The oval profile spreads contact over more of the edge, so fewer strokes bring a knife back. The handle stays put in a wet or gloved hand during quick touch-ups at the cutting table. It is sealed to the rod for cleanliness, which suits industrial use as well as restaurant kitchens.The broad face also helps a cutter who is still learning to hold a consistent angle on a steel.A round version is the 12-inch round steel with non-slip handle. For a smoother edge on the same shape, the FineCut 12-inch oval steel has a blue handle. Our best-selling steel overall is the EuroCut 12-inch Round Regular Cut Steel. Learn More$58.50 -
F. Dick 12-inch Round Regular Cut Steel with Non-Slip Handle
Everyday honing on a 12-inch rod lets most knives pass evenly from heel to tip, even long ones, and this round F. Dick steel adds a non-slip handle for a secure grip. It is a dependable steel for butchers, processors and line cooks.The grooves are cut deep and even so they keep working with age, and the handle is sealed to the rod for cleaning in demanding environments. A regular cut restores bite to knives that have started to slide on meat or vegetables. The round profile gives precise control along the curve of a boning or breaking knife.Hang it at the station between uses.A shorter rod is the 10-inch round steel with non-slip handle, and the 14-inch handles scimitars. With a black handle and metal finger guard, the F. Dick 12-inch round butcher steel is a comparable rod. For a smoother edge, step up to the FineCut 12-inch round steel. Learn More$42.25 -
F. Dick EuroCut 12-inch Oval Fine Cut Steel
Butchers, sushi chefs and meat processors want an edge that cuts flesh without tearing, and this 12-inch EuroCut oval steel with a fine cut gives it. The edge is finer than a regular cut leaves, so slices of meat and fish come away clean.An oval face spreads contact across a wider area of the edge, which makes it easier to keep the angle steady during quick touch-ups at the board. The fine grooves remove little metal, so the rod can be used throughout a shift without wearing the knife down. The length suits slicers and breaking knives as well as chef’s knives.A light touch is all it needs.For more bite on vegetables, the EuroCut 12-inch oval regular cut steel is the sibling. A round version of this cut is the EuroCut 12-inch round fine cut steel, and a fine cut oval with a non-slip handle is the FineCut 12-inch oval steel. Learn More$43.55 -
F. Dick EuroCut 12-inch Round Fine Cut Steel
The EuroCut fine cut has lighter lines than the regular cut, so it leaves a smoother, less roughened edge. That edge slices fish and beef cleanly without tearing, which makes this 12-inch round steel a good choice for portioning and carving.Fine cut steels remove less metal and mainly straighten a rolled edge, so they suit knives that are honed regularly and kept sharp. The round profile gives precise contact along curved blades such as boning knives and scimitars. Twelve inches lets a long slicer pass the rod in one stroke.It is a good second steel beside a regular cut.For more bite on vegetables, the round regular cut sibling is the EuroCut 12-inch Round Regular Cut Steel, our best-selling steel overall. An oval version of this rod is the EuroCut 12-inch oval fine cut steel. For a finer finish still, serious professionals choose the Dickoron Micro 12-inch Oval Super Fine Cut Steel. Learn More$27.95 -
F. Dick EuroCut 12-inch Oval Regular Cut Steel
When cooks come to our store looking for a honing tool, the EuroCut 12-inch oval is the model Chef David recommends. It offers F. Dick’s regular cut on an oval rod at a working-kitchen build.The oval shape makes the honing angle more forgiving to find, and the wider face reaches the whole edge from heel to tip. Regular cut grooves straighten a rolled edge and restore bite on chef’s knives, slicers and boning knives. F. Dick tapers and balances the rod so each stroke feels the same along its length.It also fits a full-size knife roll.Our best-selling steel overall is the round version, the EuroCut 12-inch Round Regular Cut Steel. For a finer finish on meat and fish, the EuroCut 12-inch oval fine cut steel is the sibling. Cooks who want a heavier rod with a metal finger guard can compare the F. Dick 12-inch oval butcher steel. Learn More$37.70 -
F. Dick EuroCut 12-inch Round Regular Cut Steel
This is the best-selling steel in our shop. The EuroCut line puts the same F. Dick rod, with the same warranty, in a less expensive handle, so the money goes into the part that touches the knife. For American and German knives, it is the best value in a honing rod we carry.Regular cut has noticeably more texture than fine cut. That extra bite keeps a working edge on knives that see heavy daily use, and it helps on tough or waxy produce such as tomatoes and bell peppers, which a fine cut can struggle with. At 12 inches, the rod is long enough to hone a 10-inch chef’s knife or slicer in one full stroke. The round profile is the one compromise, since a round rod can roll off a counter where an oval one will not.
Regular or Fine Cut?For a gentler touch-up on knives that are already sharp, the F. Dick EuroCut 12-inch Round Fine Cut Steel has the same handle and length with less texture. If you would rather have more contact with the blade and a rod that stays put on the counter, choose the F. Dick EuroCut 12-inch Oval Regular Cut Steel. Our Honing Rod Guide explains how to match a rod to your knives. Learn More$26.65
