You have no items in your shopping cart.
F. Dick Butcher Supplies
F. Dick butcher tools are expertly crafted instruments designed for professional processing . From larding needles and bacon rippers to meat saws and scabbards, these tools are made with high-quality materials to ensure precision and durability. Whether you are a butcher, meat processor, or culinary enthusiast, F. Dick tools are essential for efficiently and accurately preparing proteins. Top-quality tools that deliver exceptional performance.
-
F. Dick 14-inch Bone and Frozen Food Saw
Cutting frozen meat and fish, frozen blocks of stock and smaller bones is easier with a saw than a knife, and this 14-inch F. Dick saw is sized for that work in commercial kitchens and at home. It also handles bone in fresh meat.A knife can slip or chip on frozen product, and a cleaver shatters it. A saw cuts a clean line through a frozen roast or a block of fish without thawing it first, which helps with portioning for the freezer. The quick-clamping frame makes blade changes simple. The shorter frame is easier to control on a cutting board than a full-size bone saw.Hold the piece firmly and let the teeth do the work with long, even strokes.A replacement blade for this saw is in stock. For large cuts and heavy bone, the 20-inch bone saw gives a longer stroke. Our table below lists both saws and their blades. Learn More$74.75 -
F. Dick Blank-Boy Cutting Board Scraper
Wood and poly cutting boards collect dried-on residue and a raised surface layer that a sponge does not remove. The F. Dick Blank-Boy is a compact 3.5-inch scraper that takes that layer off, so the board is clean and smooth again.Scraping removes the residue that sits in the knife marks, where bacteria can collect, and it restores a flat surface for safe cutting. The small size works well on a home board as well as on a line where boards are scraped at the end of each shift. Draw it across the board with even pressure, following the grain on wood.Regular scraping also extends the life of a board.For heavy cleaning of butcher blocks and char-broiler grates, the F. Dick block brush with steel bristles is more aggressive. After scraping a wood board, wash it, dry it upright and oil it when it looks dry. Our cutting boards page lists the boards we carry. Learn More$31.55 -
F. Dick Block Brush with Steel Bristles
Butcher blocks and char-broiler grates build up a layer of residue and carbon that ordinary brushes cannot shift. The F. Dick block brush has tempered steel wire bristles for that deep, aggressive cleaning, and its plastic body suits kitchens and shops where wooden brushes are not allowed.Wooden brushes absorb grease and cannot be fully cleaned, which rules them out in many inspected environments. This brush can be washed and sanitized like the rest of the equipment. It removes food build-up, carbon deposits and rust from the top layer of a block, which helps the block last longer. The handle gives a sure grip for hard scrubbing.Plastic also dries quickly between uses.Use it with water and a little salt or detergent on a wood block, then rinse the block and oil it once dry. For lighter, everyday board cleaning, the F. Dick Blank-Boy cutting board scraper is gentler. Butcher shops and delis keep both on hand. Learn More$31.85 -
F. Dick Black Leather Apron
Long enough to protect well at a hot barbecue, this F. Dick leather apron is handmade in Germany from soft nappa leather. It suits pitmasters, grill cooks and anyone who wants a working apron that lasts.Supple leather moves with the body, and adjustable leather straps with a buckle let it fit a wide range of builds. Extra leather protection on the neck strap keeps it from rubbing during a long cook. A hanging loop holds a tea towel or barbecue tongs within reach, and contrasting logo appliques in antique-look leather finish the front.It makes a lasting gift for a barbecue enthusiast. Wear it through a long smoke and it will soften and darken with age, gaining character over the years.A matching F. Dick 5-slot black leather knife roll carries knives to the grill. For barbecue knives, see the Red Spirit Pit Master BBQ set, and the Red Spirit 8-inch carving fork handles the brisket. Learn More$170.00 -
F. Dick Stainless Steel Replacement Blade for 20-inch Bone Saw
This stainless steel blade fits the F. Dick 20-inch bone saw (item 9100750). It replaces a broken or dull blade and restores the saw’s clean cut through bone and large cuts of meat.Stainless steel resists the corrosion that comes with meat juices, washdowns and sanitizers, so it suits plants and shops where the saw stays wet for long stretches. The blade is made of German high-carbon stainless steel. For sawing heavy bone at volume, some cutters prefer the keener tooth of the carbon steel replacement blade, which needs drying after each use.Keep the blade properly tensioned so it cuts straight and lasts longer.To install, release the frame tension and swap in the new blade with its teeth facing the cutting direction, then tighten. Correct tension keeps the cut straight. A spare blade on the shelf keeps work moving when one breaks. The 14-inch bone and frozen food saw takes a different blade. Learn More$10.35 -
F. Dick Carbon Steel Replacement Blade for 20-inch Bone Saw
This carbon steel blade fits the F. Dick 20-inch bone saw (item 9100750) and replaces a blade that has broken or gone dull. It installs with the saw’s quick-clamp mechanism in a minute or two.Carbon steel takes and holds a keen tooth, which makes a carbon blade a good choice for sawing heavy bone at volume. It needs drying after each use, because carbon steel rusts if it is left wet. The stainless steel replacement blade is the alternative for wet environments or when the saw sits between uses.To change the blade, release the tension on the frame, unhook the old blade, and seat the new one with the teeth pointing in the cutting direction before re-tensioning. A properly tensioned blade cuts straight and is less likely to snap. Keep a spare on hand so a broken blade does not stop the line. For frozen food, see the 14-inch bone and frozen food saw, which takes its own blade. Learn More -
F. Dick 20-inch Bone Saw
Butchers, meat plants and hunters use a hand bone saw to cut through bone and large cuts of meat cleanly, and this 20-inch F. Dick saw is made for that work. It cuts through a beef shank or a deer pelvis with a straight, even kerf that a cleaver cannot match.A saw leaves fewer bone fragments than chopping and keeps the meat on either side intact. The quick-clamping action makes blade changes fast, so a dull or broken blade does not stop the work for long. The long frame gives a full stroke on large pieces.The quick blade change also lets the user switch between carbon and rust-resistant blades between jobs.Replacement blades come in stainless steel and carbon steel, and we keep both in stock. For frozen food and smaller cuts, the 14-inch bone and frozen food saw is shorter. When bone is too large for a saw stroke, a two-handed tool such as the 14-inch splitter takes over. Learn More$113.75 -
F. Dick 20 mm Bacon Ripper Replacement Blades, 5-Pack
The widest blade F. Dick makes for its F. Dick bacon ripper, the 20 mm size, cuts the broadest channel along each rib. This pack holds five replacements for processors whose bellies call for it.A wide blade may suit heavy bellies from mature hogs, where the ribs are large. As with every ripper blade, sharpness decides how the job goes. A new blade draws through with little force and leaves a clean surface, which matters when the belly will be sliced into bacon.Buyers stocking more than one width should label the boxes clearly, since the blades look alike at a glance. Fitting the wrong width changes the cut on every belly that follows, and the mistake may not show until the bellies reach the slicer.Swap the blade into the ripper head, and keep the spare blades boxed and dry until use. If the 20 mm cut turns out wider than needed, the 18 mm blades are one step down, and the original 14 mm blades match the size the ripper ships with. Learn More$30.00 -
F. Dick 18 mm Bacon Ripper Replacement Blades, 5-Pack
For bellies where a 14 or 16 mm channel is too narrow, these 18 mm blades fit the F. Dick bacon ripper and cut a wider strip with each pull. The pack contains five.Larger hogs carry heavier ribs, and a processor working those bellies may choose a wider blade to match. Keeping one width throughout a run means the trimmed bellies are uniform when they go to cure and smoke. Each blade is made to fit the ripper head exactly, so there is no play to throw the cut off line.Because the width is consistent from blade to blade, the change does not alter how the ripper handles. That keeps the line running at the same pace after each swap.Replace a blade as soon as it starts to catch rather than waiting for it to fail mid-belly. Spent blades are still sharp at the corners and should go into a sharps container. The 16 mm and 20 mm packs sit on either side of this size. Learn More$30.00 -
F. Dick 16 mm Bacon Ripper Replacement Blades, 5-Pack
Sixteen millimeters is one step wider than the 14 mm blade that comes fitted to the F. Dick bacon ripper (item 9042000). This pack holds five 16 mm blades for processors who want that slightly wider cut along the ribs of a pork belly.Changing the blade width changes how much the ripper takes with each pass. Operations that settle on 16 mm can stock this pack and swap blades as each one dulls, so the bellies that reach the slicer all look the same. A keen blade also reduces the effort of each pull on a long run.Fit the blade into the ripper head where the old one sat. Mark the box with the date it was opened, which helps track how many bellies each blade handles. The original-width 14 mm blades and the wider 20 mm blades fit the same ripper, and the table below compares all four. Learn More$30.00
