Yanagi / Sujihiki

One of the traditional Japanese shapes, Yanagi knives are similar to carvers in appearance but can be distinguished by their long thick spines, prominent shinogi lines, and concave back sides. The westernized version of this form is known as Sujihiki. Flat ground and never more than 3mm in width, Sujihiki knives have long, thin, pointed blades that are very comparable to carving knives in both appearance and application.

Sujihikis (also known as Sujibikis) are commonly made in both carbon and stainless steels. Yanagis (also known as Yanagibas) are more commonly made in Carbon Steel. We do have a selection of Stainless Steel Yanagis as well. You can browse our selection of Stainless Steel Yanagis here.

Items 1 to 10 of 49 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Kikuichi Kokaji White Carbon 9.4-inch (240mm) Kiritsuke Yanagi

    Kikuichi’s Kokaji knives are completely hand forged by the Kokaji-kai knife makers in Sakai, and this 9.4-inch (240mm) yanagi gives the classic sashimi knife an angled kiritsuke tip. Kikuichi points to the line’s geometry, edge retention and eye-catching kiritsuke tip, and each blade is hand engraved with the Kikuichi chrysanthemum.The single-bevel White #2 carbon edge at 61 to 62 HRC slices raw fish in one smooth pull, and the angled tip is useful for fine scoring and detailed garnish work. This is a knife for an experienced sushi cook or a collector who wants a hand-forged Sakai blade made in the traditional way, and it ships with a saya. Like any traditional carbon knife, it should be dried and oiled after use and sharpened on whetstones.
    From the Same MakersThe Kokaji White Carbon 8.25-inch (210mm) Kiritsuke Gyuto brings the same steel and tip to a double-bevel chef’s knife. Learn More
  • Shun Premier 9.5-inch Slicing Knife

    The Shun Premier 9.5-inch Slicing Knife is made for carving and slicing meat. Its long blade lets you cut each slice in a single stroke, producing long, even slices without the tearing and sawing that a shorter knife requires. The narrow profile and keen edge reduce friction, so the blade moves smoothly through roasts and poultry. It suits a wide variety of meats and also slices larger vegetables and melons. The hand-hammered tsuchime finish on the Shun Premier blade helps each slice release from the steel.
    FeaturesLong blade: Nine and a half inches of edge crosses wide roasts in one stroke, so slices stay intact.Narrow profile: The slim blade reduces friction for a smooth, clean cut.VG-MAX cutting core: Shun’s proprietary steel resists wear and corrosion and holds a fine, keen edge.Damascus cladding: Layered stainless steel supports and protects the core.Hammered tsuchime finish: The hand-hammered surface helps slices release from the blade.Contoured walnut PakkaWood handle: The handle offers comfort and control and resists moisture.Handcrafted in Seki City, Japan: Each Shun knife requires at least 100 individual steps to complete in Seki City, one of Japan’s most important blade-making centers since the 13th century.Free lifetime sharpening: Shun offers free lifetime sharpening, so the edge can be professionally restored whenever it needs it.
    Tasks It Handles WellCarving roast turkey, chicken, and duckSlicing prime rib, pork loin, and leg of lambSlicing brisket and hamSlicing smoked salmon and cured meatsCutting large melons
    Choosing a Shun Premier Slicing KnifeTo carve at the table with a matching fork, the Shun Premier 2-Piece Carving Set pairs this knife with the 6.5-inch Carving Fork. For a smooth Damascus finish and D-shaped ebony handle with hollow-ground indentations, consider the Shun Classic 9-inch Hollow Ground Slicing Knife. Learn More
  • Glestain KE Series 9.4-inch (240mm) Sujihiki

    The 240mm sujihiki is a versatile Japanese slicer. Use it to carve a roast or a ham, to portion salmon or tuna, or to trim a whole beef tenderloin, and it reaches across most cuts in a single long stroke.Slicing is where Glestain’s dimples earn their place. Thin slices of meat or fish tend to stick to a smooth blade and tear as you pull the knife back. The dimples break that contact, and the asymmetrical grind moves each slice off the steel so it falls flat and intact. The KE Series bolster and end cap give the knife weight at the hand, which steadies a long draw cut.A sujihiki is the Western-handled cousin of the yanagi and is ground on both faces, so it is easier to maintain than a single-bevel sushi knife.
    Other SujihikiFor a smooth face suited to sashimi, see the W Series 240mm Sujihiki. The Ice Handle 240mm Sujihiki has a stainless handle, and left-handed cooks can choose the KE Series 240mm Left-Handed Sujihiki. All of them are compared below. See our kitchen knife shapes guide for more on slicers. Learn More
  • Global Classic 10-inch Sujihiki

    A sujihiki is the Japanese answer to the Western slicer: a long, narrow blade ground on both sides, made to slice fish and boneless meat in a single drawing stroke. The G-47 brings that shape to the Global Classic line with a 25 cm blade.The length lets the knife draw through a block of tuna, a salmon fillet or a beef tenderloin in one motion, which leaves a smooth, clean face on each slice. The narrow blade has little surface for food to drag against. It carves boneless roasts for the table and slices terrines neatly.Because the edge is ground on both sides, the G-47 works equally well in the right or left hand and can be sharpened like any other double-bevel knife, which makes it the practical choice for a cook who wants a sashimi-length slicer without the upkeep of a single-bevel yanagi.
    Sujihiki or Yanagi?The Global Classic 10-inch Yanagi Sashimi Knife is single-bevel and right-handed. It produces a finer cut on raw fish but takes whetstone skill to maintain. Choose the G-47 for versatility and easier care. Global lists the blade at 25 cm, which retailers often round to 10 inches; it measures 9.8 inches. Our guide to sujihiki, yanagi and other knife shapes explains the differences. Learn More

    Regular Price: $179.95

    Special Price $143.96

  • Kikuichi WG Series Elite Warikomi Gold 9.4-inch (240mm) Sujihiki

    Shoppers search for this knife by its model number, WGS24, and it is the middle size of Kikuichi’s Elite Warikomi Gold sujihikis. At 9.4 inches (240mm), it carves a beef tenderloin or a whole side of fish in a single draw, the length many professional carving stations settle on.Kikuichi builds the series with a VG1 stainless edge clad in softer steel, a warikomi construction that keeps the cutting edge hard and the blade body tough. The narrow slicer profile leaves clean faces on roasts and sashimi, and the Western-style handle gives a secure grip for cooks used to European carving knives. Its 240mm length is long enough for holiday roasts and short enough to steer through a fish loin without overhanging the board. The knife carries on a legacy that began with the swords Kikuichi forged for the Emperor.
    Sujihiki Sizes in the WG SeriesFor a more compact slicer, see the 8.25-inch (210mm) Sujihiki. The 10.6-inch (270mm) Sujihiki adds reach for large roasts. Learn More
  • Kikuichi WG Series Elite Warikomi Gold 8.25-inch (210mm) Sujihiki

    An 8.25-inch (210mm) sujihiki is a compact slicer, and Kikuichi’s Elite Warikomi Gold version is the most manageable size for a home kitchen. It slices a pork tenderloin or a salmon fillet in long, clean pulls, and it stores in a standard knife block slot.The blade is a warikomi construction, a VG1 stainless core held between layers of softer steel, which pairs a keen edge with a tough, easy-care body. The slim slicer profile creates less drag than a chef’s knife and leaves a smooth, glossy face on sliced meat and fish. It is a sensible first sujihiki for anyone who carves at home. The Western handle makes the shape approachable for cooks who are new to Japanese slicers, and Kikuichi notes the whole series is light and comfortable in the hand.
    Choosing a Sujihiki LengthThe Elite Warikomi Gold 9.4-inch (240mm) Sujihiki handles larger roasts, and the 10.6-inch (270mm) Sujihiki is the long professional size. Learn More
  • Kikuichi GM Series Molybdenum Stainless Steel 9.4-inch (240mm) Sujihiki

    A sujihiki is the Japanese answer to a carving knife, narrower than a gyuto so it slices with little drag, and Kikuichi’s GM Series 9.4-inch (240mm) sujihiki brings that shape to easy-care AUS10 stainless steel. It carves roasts, portions salmon and slices sashimi with one long draw.Stainless steel is a practical choice for a slicer that spends time in raw fish and juicy meats, since it needs no special drying routine during service. The 240mm length suits a home cook carving the holiday roast as well as a professional working a carving station or a sushi counter. The steel is softer than many Japanese steels but harder than German and American alloys. Kikuichi notes that GM blades are thinner than German knives, which helps keep a delicate slice of fish from tearing. Hone the edge before carving and use long, light strokes from heel to tip. The edge is easy to maintain with a honing steel, a draw sharpener or whetstones.
    240mm or 270mm Sujihiki?The GM Series 10.6-inch (270mm) Sujihiki adds length for large roasts and whole loins. In carbon steel, the GC Series 9.4-inch (240mm) Sujihiki takes a keener edge. Learn More
  • Kikuichi NWD Nickel Warikomi Damascus 9.4-inch (240mm) Sujihiki

    Kikuichi’s NWD sujihiki is a 9.4-inch (240mm) slicer clad in 45 layers of nickel and stainless steel around an AUS10 core, with a light octagonal rosewood handle. Its model number, NWD245, refers to the line’s product code, and Kikuichi lists the blade at 24 cm.Its slim profile glides through the cut, portions large roasts, delicate fish for sashimi and terrines with ease, and leaves a clean face on each slice, and the damascus surface hides the light scratches of daily use. Because the wa handle weighs so little, the blade does the work, and a long, single stroke takes very little pressure. Hone it lightly before each carving session. It is a knife for cooks who carve and slice regularly and want the damascus pattern to match a Nickel Warikomi Damascus gyuto on the same block.
    Matching Knives and StoragePair it with the NWD 9.4-inch (240mm) Gyuto, and store it in a Kikuichi 240mm Sujihiki Magnet Saya. Learn More
  • Kikuichi GC Series Carbon Steel 9.4-inch (240mm) Sujihiki

    Kikuichi calls its GC Series sujihiki a great knife for long slices through meats and even sushi rolls, and the 9.4-inch (240mm) length handles most roasts, briskets and fish loins in a single draw.A sujihiki is narrower than a gyuto, so it creates less drag in the cut and leaves a clean, glossy face on sliced meat or fish. It is a Western-style slicer, easier to maintain than a traditional yanagi, which makes it a practical choice for a home cook who carves roasts and slices sashimi. The carbon steel takes a fine edge for clean cuts through raw fish, and it should be wiped dry between slices of wet or acidic foods. Professional cooks use the 240mm at carving stations where a longer knife would be unwieldy.
    240mm or 270mm Sujihiki?The 10.6-inch (270mm) Sujihiki adds length for large roasts and whole fish loins. For an all-purpose knife at this length, see the 9.4-inch (240mm) Gyuto. Learn More
  • Masahiro MV 9.5-inch (240mm) Sujihiki Slicer

    The Professional Slicer That Outlasts the Shift Unlike many Japanese Sujihikis that prioritize extreme hardness at the cost of brittleness, the Masahiro MV 240mm is built for the tactile reality of a busy line. When you grip the laminated wood handle, the 245g weight provides a reassuring presence that aids in long, continuous draws through large roasts or chilled sub-primals. This isn't a delicate 'laser'; it is a robust protein tool with a 2.5mm spine that tapers to a surgically sharp asymmetrical edge. Working with this knife, you immediately notice how the single-bevel-style grind (right-handed) allows the blade to track through fats and connective tissues with zero steering. The MBS-26 high-carbon stainless steel is a proprietary marvel—it provides the aggressive bite of carbon steel but maintains the corrosion resistance needed for acidic marinades or wet prep environments. During testing, the edge remained remarkably stable even when accidentally making light contact with poultry bone—a scenario that would chip a standard VG-10 blade. It responds instantly to a few passes on a 1200-grit ceramic rod, returning to a screaming sharp edge without requiring a full whetstone session mid-service. This is the definitive tool for chefs who need a slicer that works as hard as they do, from the first ticket to the final breakdown. Learn More

Items 1 to 10 of 49 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5