Yanagi / Sujihiki

One of the traditional Japanese shapes, Yanagi knives are similar to carvers in appearance but can be distinguished by their long thick spines, prominent shinogi lines, and concave back sides. The westernized version of this form is known as Sujihiki. Flat ground and never more than 3mm in width, Sujihiki knives have long, thin, pointed blades that are very comparable to carving knives in both appearance and application.

Sujihikis (also known as Sujibikis) are commonly made in both carbon and stainless steels. Yanagis (also known as Yanagibas) are more commonly made in Carbon Steel. We do have a selection of Stainless Steel Yanagis as well. You can browse our selection of Stainless Steel Yanagis here.

10 Item(s)

per page

  • Kikuichi Kokaji White Carbon 9.4-inch (240mm) Kiritsuke Yanagi

    Kikuichi’s Kokaji knives are completely hand forged by the Kokaji-kai knife makers in Sakai, and this 9.4-inch (240mm) yanagi gives the classic sashimi knife an angled kiritsuke tip. Kikuichi points to the line’s geometry, edge retention and eye-catching kiritsuke tip, and each blade is hand engraved with the Kikuichi chrysanthemum.The single-bevel White #2 carbon edge at 61 to 62 HRC slices raw fish in one smooth pull, and the angled tip is useful for fine scoring and detailed garnish work. This is a knife for an experienced sushi cook or a collector who wants a hand-forged Sakai blade made in the traditional way, and it ships with a saya. Like any traditional carbon knife, it should be dried and oiled after use and sharpened on whetstones.
    From the Same MakersThe Kokaji White Carbon 8.25-inch (210mm) Kiritsuke Gyuto brings the same steel and tip to a double-bevel chef’s knife. Learn More
  • Kikuichi WG Series Elite Warikomi Gold 9.4-inch (240mm) Sujihiki

    Shoppers search for this knife by its model number, WGS24, and it is the middle size of Kikuichi’s Elite Warikomi Gold sujihikis. At 9.4 inches (240mm), it carves a beef tenderloin or a whole side of fish in a single draw, the length many professional carving stations settle on.Kikuichi builds the series with a VG1 stainless edge clad in softer steel, a warikomi construction that keeps the cutting edge hard and the blade body tough. The narrow slicer profile leaves clean faces on roasts and sashimi, and the Western-style handle gives a secure grip for cooks used to European carving knives. Its 240mm length is long enough for holiday roasts and short enough to steer through a fish loin without overhanging the board. The knife carries on a legacy that began with the swords Kikuichi forged for the Emperor.
    Sujihiki Sizes in the WG SeriesFor a more compact slicer, see the 8.25-inch (210mm) Sujihiki. The 10.6-inch (270mm) Sujihiki adds reach for large roasts. Learn More
  • Kikuichi WG Series Elite Warikomi Gold 8.25-inch (210mm) Sujihiki

    An 8.25-inch (210mm) sujihiki is a compact slicer, and Kikuichi’s Elite Warikomi Gold version is the most manageable size for a home kitchen. It slices a pork tenderloin or a salmon fillet in long, clean pulls, and it stores in a standard knife block slot.The blade is a warikomi construction, a VG1 stainless core held between layers of softer steel, which pairs a keen edge with a tough, easy-care body. The slim slicer profile creates less drag than a chef’s knife and leaves a smooth, glossy face on sliced meat and fish. It is a sensible first sujihiki for anyone who carves at home. The Western handle makes the shape approachable for cooks who are new to Japanese slicers, and Kikuichi notes the whole series is light and comfortable in the hand.
    Choosing a Sujihiki LengthThe Elite Warikomi Gold 9.4-inch (240mm) Sujihiki handles larger roasts, and the 10.6-inch (270mm) Sujihiki is the long professional size. Learn More
  • Kikuichi GM Series Molybdenum Stainless Steel 9.4-inch (240mm) Sujihiki

    A sujihiki is the Japanese answer to a carving knife, narrower than a gyuto so it slices with little drag, and Kikuichi’s GM Series 9.4-inch (240mm) sujihiki brings that shape to easy-care AUS10 stainless steel. It carves roasts, portions salmon and slices sashimi with one long draw.Stainless steel is a practical choice for a slicer that spends time in raw fish and juicy meats, since it needs no special drying routine during service. The 240mm length suits a home cook carving the holiday roast as well as a professional working a carving station or a sushi counter. The steel is softer than many Japanese steels but harder than German and American alloys. Kikuichi notes that GM blades are thinner than German knives, which helps keep a delicate slice of fish from tearing. Hone the edge before carving and use long, light strokes from heel to tip. The edge is easy to maintain with a honing steel, a draw sharpener or whetstones.
    240mm or 270mm Sujihiki?The GM Series 10.6-inch (270mm) Sujihiki adds length for large roasts and whole loins. In carbon steel, the GC Series 9.4-inch (240mm) Sujihiki takes a keener edge. Learn More
  • Kikuichi NWD Nickel Warikomi Damascus 9.4-inch (240mm) Sujihiki

    Kikuichi’s NWD sujihiki is a 9.4-inch (240mm) slicer clad in 45 layers of nickel and stainless steel around an AUS10 core, with a light octagonal rosewood handle. Its model number, NWD245, refers to the line’s product code, and Kikuichi lists the blade at 24 cm.Its slim profile glides through the cut, portions large roasts, delicate fish for sashimi and terrines with ease, and leaves a clean face on each slice, and the damascus surface hides the light scratches of daily use. Because the wa handle weighs so little, the blade does the work, and a long, single stroke takes very little pressure. Hone it lightly before each carving session. It is a knife for cooks who carve and slice regularly and want the damascus pattern to match a Nickel Warikomi Damascus gyuto on the same block.
    Matching Knives and StoragePair it with the NWD 9.4-inch (240mm) Gyuto, and store it in a Kikuichi 240mm Sujihiki Magnet Saya. Learn More
  • Kikuichi GC Series Carbon Steel 9.4-inch (240mm) Sujihiki

    Kikuichi calls its GC Series sujihiki a great knife for long slices through meats and even sushi rolls, and the 9.4-inch (240mm) length handles most roasts, briskets and fish loins in a single draw.A sujihiki is narrower than a gyuto, so it creates less drag in the cut and leaves a clean, glossy face on sliced meat or fish. It is a Western-style slicer, easier to maintain than a traditional yanagi, which makes it a practical choice for a home cook who carves roasts and slices sashimi. The carbon steel takes a fine edge for clean cuts through raw fish, and it should be wiped dry between slices of wet or acidic foods. Professional cooks use the 240mm at carving stations where a longer knife would be unwieldy.
    240mm or 270mm Sujihiki?The 10.6-inch (270mm) Sujihiki adds length for large roasts and whole fish loins. For an all-purpose knife at this length, see the 9.4-inch (240mm) Gyuto. Learn More
  • Kikuichi Kasumi Series 9.4-inch (240mm) Yanagi

    Kikuichi calls the yanagi the quintessential sashimi knife, and the 9.4-inch (240mm) Kasumi yanagi is the length sushi cooks reach for at the counter. Its long, narrow single-bevel blade slices raw fish in one pulling stroke, which leaves a clean, glossy surface with no torn fibers.Kasumi is Kikuichi’s most popular traditional series, by its own account, and Kikuichi calls a Kasumi yanagi a knife fit for a true professional. Kikuichi hand forges the blade from two pieces of steel, a hard White #2 carbon edge backed by a softer carbon steel jacket, following traditional sword-making technique, which makes the edge keen and the blade forgiving to sharpen. Because it is single bevel, the yanagi rewards a cook who learns traditional sharpening, and it is a natural step for a home cook who already makes sushi and sashimi.
    Choosing a Kasumi YanagiThe Kasumi 8.25-inch (210mm) Yanagi suits a home cutting board, and the Kasumi 9.4-inch (240mm) Fuguhiki is thinner for paper-thin slices. Learn More
  • Kikuichi GW Series Ginsan Sanmai 9.4-inch (240mm) Sujihiki

    The GW Series is Kikuichi’s plainest Ginsan line, a three-layer (sanmai) blade with a Silver-3 stainless core that Kikuichi deliberately leaves without a hammered or damascus finish. On this 9.4-inch (240mm) sujihiki, that simplicity puts the attention on the cut.Those qualities, which Kikuichi sums up as thin, strong and precise, are clearest in a narrow slicer working through raw fish and rare beef. A walnut wa handle keeps the knife light, and the 240mm length handles a typical roast or fish loin in a single pull. Hone it gently before each use, and wipe the blade between cuts of fish. It suits sushi cooks and home cooks who slice sashimi and want a stainless edge that is easy to maintain.
    240mm or 270mm?The GW Series 10.6-inch (270mm) Sujihiki adds length for larger work. For a matching gyuto in Ginsan steel, see the GN Series 9.4-inch (240mm) Gyuto. Learn More

    Regular Price: $355.00

    Special Price $335.00

  • Kikuichi Kasumi Series 8.25-inch (210mm) Yanagi

    The 8.25-inch (210mm) yanagi is the shortest in Kikuichi’s Kasumi range and the most practical for a home kitchen, where a long sashimi knife can overhang a standard cutting board. Kikuichi supplies this size with a saya to protect the edge.The single-bevel blade is hand forged in Kikuichi’s Kasumi construction, a hard White #2 carbon edge joined to a softer carbon steel back. That pairing gives a fine, keen edge for slicing salmon, tuna and yellowtail, and the softer back makes sharpening on whetstones more forgiving. It is a good first traditional knife for a home cook learning to make sashimi and nigiri, and the shorter length is easier to control as that skill develops.
    210mm or 240mm?The Kasumi 9.4-inch (240mm) Yanagi gives the longer single stroke professional sushi cooks prefer. For a slicer with a double-bevel edge, see the GC Series Carbon Steel 9.4-inch (240mm) Sujihiki. Learn More
  • Kikuichi WDT Series Warikomi Damascus Tsuchime 9.4-inch (240mm) Sujihiki

    Slicing roasts and fish is the job of a sujihiki, and the WDT24S gives that job a 9.4-inch (240mm) blade of hammered damascus over a VG10 core. Shoppers search for it as the Kikuichi WDT Series Warikomi Damascus Tsuchime sujihiki.A sujihiki is narrower than a gyuto, so it meets less resistance in the cut and leaves a smooth face on brisket and sashimi. Kikuichi notes that the tsuchime finish helps release food, which keeps thin slices of fish or cured meat from clinging as they come off the blade. With a Western mahogany-dyed birch handle, it suits cooks who want a Japanese slicer without changing their grip, whether at a carving station or at home for the holidays.
    Pairing With a GyutoIts damascus pattern matches the WDT 9.4-inch (240mm) Gyuto, and a Kikuichi 240mm Sujihiki Magnet Saya keeps the edge covered in a drawer or knife bag. Learn More

10 Item(s)

per page