You have no items in your shopping cart.
Deba
De(Fat) Ba(Knife)
This traditional Japanese knife shape is ideal for butchering and filleting fish as its unique shape cuts cleanly and precisely preserving delicate flesh. Deba knives can also be used on poultry, vegetables, and meat although we do not recommend using it for breaking dense bones as the ultra-hard Japanese steel is subject to chipping and pitting. Keep in mind that Deba knives are typically single sided, but some more westernized debas are made with a double-bevel meaning that both sides are angled. Note that the term yo-deba may be used by certain makers to refer to a knife that is particularly thick, but this definition maintains no correlation to the standard deba characteristics.
-
Minonokuni Matsu 6.5-inch (165mm) Deba
A 165mm deba is sized for the whole fish a cook brings home from the market, such as sea bream, mackerel and small salmon. The Matsu version pairs that size with blue steel, so the edge stays keen through a full morning of breaking down fish before it needs the stone.
Work on the FrameThe heel and the thick spine take the heavy cuts through the head and collar. The forward third does the fine work, tracing the backbone for a clean three-piece fillet and lifting the belly away from the ribs. Kept to fish and poultry, the blade handles small bones well, but it is not a cleaver for frozen product or the heavy leg bones of beef.Blue steel is the hardest steel in the Minonokuni range and the most delicate, and a single-bevel edge is very thin by nature. Our advice is to choose Matsu after some experience with chisel-ground knives. A cook still learning that grind will be better served by the Take 165mm deba in white steel, which is less brittle, or the Ume 165mm deba, the most forgiving of the three.
165mm or 180mm?Choose this size for small and medium fish and for jointing chickens. For salmon and heavier heads, the Matsu 180mm deba carries more weight behind the heel. Our guide to kitchen knife shapes explains where the deba fits among the other Japanese knives. Learn MoreRegular Price: $330.00
Special Price $260.00
-
Minonokuni Take 7.1-inch (180mm) Left-Handed Deba
This is a left-handed deba in the true sense. Forging and grinding put the single bevel on the left face, rather than reshaping a right-handed blade, so a left-handed cook gets the same control along the frame that the knife was designed to give. At 180mm, it is the largest left-handed deba in the Take line.The size is meant for large fish such as salmon and big snapper. The heavy heel splits heads and cuts collars, and the long edge follows the backbone in fewer passes. On poultry, it breaks down a whole bird with room to spare.
A Line for Learning and for WorkTake is the line we suggest for cooks who want a knife good enough for professional work but less brittle than blue steel. For a left-handed cook still learning to sharpen a single bevel, the Ume 180mm left-handed deba is more forgiving still.Shorter left-handed sizes are the Take 165mm and Take 150mm. The right-handed version is the Take 180mm deba. The knife shapes guide explains where the deba fits.Each Take knife is forged by hand. Expect small hammer marks, a slightly uneven finish on the iron and other signs of handwork, none of which affect the edge. Learn More -
Minonokuni Take 6.5-inch (165mm) Left-Handed Deba
For a left-handed cook, the 165mm Take deba is a dependable all-round choice. The blade is forged and ground as a true left-handed knife, with the bevel on the left face, so it tracks along the spine of a fish the way a right-handed deba does for a right-handed cook.The weight at this size is useful when tracing the backbone on salmon or a small tuna, and it carries through the head and collar without forcing. It is also a good size for game birds and freshwater fish. Before a large job, check that the edge is keen. A deba that has lost its edge needs more force, and force is how a thin edge gets chipped.
Steel and SizeTake uses white steel, which takes a very keen edge and returns to sharpness quickly on a waterstone. It is less brittle than blue steel, which is why we suggest Take for cooks who are not yet experts in single-bevel knives.The Take 150mm left-handed deba is lighter for small fish, and the Take 180mm left-handed deba adds weight for larger ones. The right-handed model is the Take 165mm deba. See the kitchen knife shapes guide for an overview of the deba. Learn More$295.00 -
Minonokuni Ume 7.7-inch (195mm) Deba
The 195mm is the biggest deba in the Ume line. It is meant for removing heads and collars and separating fillets on large fish with a wide frame. The extra length gives the edge more reach along the backbone, and the extra weight takes the strain off the cook’s wrist.This deba is beautifully shaped and ground for its line. The face is flat enough that the shinogi, the line where the bevel meets the face, lies evenly on the stone during sharpening. That matters for a learner, because a flat bevel is much easier to sharpen consistently than an uneven one.
Who It SuitsUme is the most forgiving of the three standard Minonokuni lines and the best for learning to sharpen. On a large, heavy knife, a forgiving edge is especially useful, since a deba of this size meets a lot of bone. Cooks who already handle large fish with confidence may prefer the white steel Take 195mm deba.For mixed fish and poultry, the Ume 180mm deba or Ume 165mm deba is easier to handle. Our guide to kitchen knife shapes places the deba among its relatives. Learn More$148.00 -
Minonokuni Ume 7.1-inch (180mm) Left-Handed Deba
Here is a large deba for left-handed cooks. The Ume 180mm left-handed deba is ground with its bevel on the left face, and it has the length and weight to break down salmon, bass and other large fish.On a big fish, let the weight of the heel take the head off, then turn the knife and follow the backbone from head to tail. Because the bevel is on the correct side for the left hand, the edge hugs the frame instead of drifting into the fillet. The same knife breaks down whole chickens and ducks.
Learning on UmeUme is the line we suggest to a cook who is new to single-bevel knives. Its steel is the most forgiving of our three standard lines and the best for learning to sharpen. A chip from a misjudged cut is less likely, and when the edge dulls, it comes back on a stone without fuss. The Take 180mm left-handed deba is the harder, white steel alternative.The smaller Ume 165mm left-handed deba is quicker on medium fish. The right-handed model is the Ume 180mm deba. See the kitchen knife shapes guide for more. Learn More -
Minonokuni Ume 7.1-inch (180mm) Deba
Larger fish need a larger deba, and the 180mm Ume gives a newer cook the weight to take on salmon, striped bass and big snapper. The knife’s mass and thick spine supply the force for heavy cuts through heads and collars, so the cook can concentrate on control.The single-bevel edge runs along the bone with minimal damage to the fish. Take the fillet off in long strokes from head to tail, keeping the blade flat to the frame, then trim the rib bones with the tip.
A Forgiving SteelUme is the most forgiving of the three standard Minonokuni lines. Its carbon steel is less likely to chip than the harder white steel of Take or the blue steel of Matsu, which matters on a heavy knife that meets bone on every fish. It is also the easiest of the three to bring back to sharpness on a stone.The Ume 165mm deba is easier to handle on smaller fish, and the Ume 195mm deba is the largest. Left-handed cooks can order the Ume 180mm left-handed deba. A cook ready for a harder edge can compare the Take 180mm deba. The guide to knife shapes covers the deba. Learn More$110.00 -
Minonokuni Ume 6.5-inch (165mm) Left-Handed Deba
A left-handed cook learning Japanese fish butchery needs a knife ground for the left hand, and this Ume 165mm deba is one. Its single bevel is on the left face, so the edge stays against the backbone as the fillet comes away.The heavy blade breaks down whole fish and poultry, cleaving fillets from the bone and cutting through heads and collars. The size suits medium fish such as salmon, sea bass and snapper. A cook who mainly handles small fish may find the left-handed Take 150mm easier to manoeuvre.
Why Start with UmeThe Ume line uses yellow paper steel. It is the softest of the steels in our three standard lines, which makes it the most forgiving of mistakes and the easiest to sharpen. For a left-handed cook working out how a single bevel behaves, that is a real advantage. When the time comes for a harder edge, the Take 165mm left-handed deba is the step up.The right-handed version is the Ume 165mm deba, and the Ume 180mm left-handed deba is larger. The knife shapes guide covers the deba. Learn More -
Minonokuni Ume 6.5-inch (165mm) Deba
The 165mm is the deba size that does a little of everything. It is heavy enough to take the head off a medium salmon and nimble enough to fillet a mackerel, and it breaks down a whole chicken without trouble. In the Ume line, it is our suggestion for a cook who wants one deba to learn on.The thick spine and substantial weight give leverage through fish collars and joints, while the single bevel keeps the forward edge close to the bone. Cutting along the frame rather than across it, the cook can take clean fillets with little waste.
Ume, Take or Matsu?The three standard lines are not a simple ranking. Each suits a different cook. Ume is the most forgiving and the best for learning to sharpen. The Take 165mm deba is the sweet spot for cooks ready for a harder edge, and the Matsu 165mm deba is for those already experienced with single-bevel knives.Left-handed cooks should choose the Ume 165mm left-handed deba. Smaller fish are easier with the Ume 150mm deba, and larger ones with the Ume 180mm deba. The knife shapes guide explains the deba. Learn More -
Minonokuni Ume 5.9-inch (150mm) Deba
For a cook who has never owned a deba, the Ume 150mm is where we suggest starting. The size suits trout, mackerel and other fish that fit on a home cutting board, and the Ume line is the most forgiving of the three standard Minonokuni lines.The deba is a single-bevel knife with a thick, heavy spine. The heel cuts through heads and collars, and the thinner forward edge glides along the backbone to lift each fillet. Learning that motion takes a few fish, and a forgiving edge makes the learning easier.
Built for LearningUme uses a softer carbon steel than Take or Matsu. It is less likely to chip when a cut goes wrong, and it is the best of the three lines for learning to sharpen a single bevel. A Minonokuni 1000 grit waterstone is the stone to begin with. As skills grow, the Take 150mm deba in white steel is the natural next knife.For bigger fish and poultry, see the Ume 165mm deba. Our kitchen knife shapes guide shows how the deba is used alongside the yanagiba and usuba. Learn More -
Minonokuni Take 7.7-inch (195mm) Deba
The 195mm is the largest deba in the Take line, built for large saltwater fish and big freshwater fish. Its mass is the point. A heavy blade drops through the head and collar of a large fish with little effort from the cook, and the long edge keeps the cut straight along a wide frame.That weight makes it slower on small fish, so it suits a cook who regularly handles large ones, such as a restaurant buying whole fish or an angler cleaning a large catch. For mixed work, the Take 180mm deba or Take 165mm deba is easier to manoeuvre.
Steel ChoiceWhite steel gives the Take line an edge that holds up in a professional kitchen while staying less brittle than blue steel. That combination is why we call Take the sweet spot of the Minonokuni range. A cook who wants the same size in the most forgiving steel can look at the Ume 195mm deba.Left-handed cooks will find the Take 180mm left-handed deba the largest left-handed option in the line. For more on choosing a deba, see the guide to knife shapes. Learn More$265.00
