Knives

Items 41 to 50 of 1489 total

per page

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  • Minonokuni Ume 7.7-inch (195mm) Deba

    The 195mm is the biggest deba in the Ume line. It is meant for removing heads and collars and separating fillets on large fish with a wide frame. The extra length gives the edge more reach along the backbone, and the extra weight takes the strain off the cook’s wrist.This deba is beautifully shaped and ground for its line. The face is flat enough that the shinogi, the line where the bevel meets the face, lies evenly on the stone during sharpening. That matters for a learner, because a flat bevel is much easier to sharpen consistently than an uneven one.
    Who It SuitsUme is the most forgiving of the three standard Minonokuni lines and the best for learning to sharpen. On a large, heavy knife, a forgiving edge is especially useful, since a deba of this size meets a lot of bone. Cooks who already handle large fish with confidence may prefer the white steel Take 195mm deba.For mixed fish and poultry, the Ume 180mm deba or Ume 165mm deba is easier to handle. Our guide to kitchen knife shapes places the deba among its relatives. Learn More
  • Minonokuni Ume 7.1-inch (180mm) Left-Handed Deba

    Here is a large deba for left-handed cooks. The Ume 180mm left-handed deba is ground with its bevel on the left face, and it has the length and weight to break down salmon, bass and other large fish.On a big fish, let the weight of the heel take the head off, then turn the knife and follow the backbone from head to tail. Because the bevel is on the correct side for the left hand, the edge hugs the frame instead of drifting into the fillet. The same knife breaks down whole chickens and ducks.
    Learning on UmeUme is the line we suggest to a cook who is new to single-bevel knives. Its steel is the most forgiving of our three standard lines and the best for learning to sharpen. A chip from a misjudged cut is less likely, and when the edge dulls, it comes back on a stone without fuss. The Take 180mm left-handed deba is the harder, white steel alternative.The smaller Ume 165mm left-handed deba is quicker on medium fish. The right-handed model is the Ume 180mm deba. See the kitchen knife shapes guide for more. Learn More
  • Minonokuni Ume 7.1-inch (180mm) Deba

    Larger fish need a larger deba, and the 180mm Ume gives a newer cook the weight to take on salmon, striped bass and big snapper. The knife’s mass and thick spine supply the force for heavy cuts through heads and collars, so the cook can concentrate on control.The single-bevel edge runs along the bone with minimal damage to the fish. Take the fillet off in long strokes from head to tail, keeping the blade flat to the frame, then trim the rib bones with the tip.
    A Forgiving SteelUme is the most forgiving of the three standard Minonokuni lines. Its carbon steel is less likely to chip than the harder white steel of Take or the blue steel of Matsu, which matters on a heavy knife that meets bone on every fish. It is also the easiest of the three to bring back to sharpness on a stone.The Ume 165mm deba is easier to handle on smaller fish, and the Ume 195mm deba is the largest. Left-handed cooks can order the Ume 180mm left-handed deba. A cook ready for a harder edge can compare the Take 180mm deba. The guide to knife shapes covers the deba. Learn More
  • Minonokuni Ume 6.5-inch (165mm) Left-Handed Deba

    A left-handed cook learning Japanese fish butchery needs a knife ground for the left hand, and this Ume 165mm deba is one. Its single bevel is on the left face, so the edge stays against the backbone as the fillet comes away.The heavy blade breaks down whole fish and poultry, cleaving fillets from the bone and cutting through heads and collars. The size suits medium fish such as salmon, sea bass and snapper. A cook who mainly handles small fish may find the left-handed Take 150mm easier to manoeuvre.
    Why Start with UmeThe Ume line uses yellow paper steel. It is the softest of the steels in our three standard lines, which makes it the most forgiving of mistakes and the easiest to sharpen. For a left-handed cook working out how a single bevel behaves, that is a real advantage. When the time comes for a harder edge, the Take 165mm left-handed deba is the step up.The right-handed version is the Ume 165mm deba, and the Ume 180mm left-handed deba is larger. The knife shapes guide covers the deba. Learn More
  • Minonokuni Ume 6.5-inch (165mm) Deba

    The 165mm is the deba size that does a little of everything. It is heavy enough to take the head off a medium salmon and nimble enough to fillet a mackerel, and it breaks down a whole chicken without trouble. In the Ume line, it is our suggestion for a cook who wants one deba to learn on.The thick spine and substantial weight give leverage through fish collars and joints, while the single bevel keeps the forward edge close to the bone. Cutting along the frame rather than across it, the cook can take clean fillets with little waste.
    Ume, Take or Matsu?The three standard lines are not a simple ranking. Each suits a different cook. Ume is the most forgiving and the best for learning to sharpen. The Take 165mm deba is the sweet spot for cooks ready for a harder edge, and the Matsu 165mm deba is for those already experienced with single-bevel knives.Left-handed cooks should choose the Ume 165mm left-handed deba. Smaller fish are easier with the Ume 150mm deba, and larger ones with the Ume 180mm deba. The knife shapes guide explains the deba. Learn More
  • Minonokuni Ume 5.9-inch (150mm) Deba

    For a cook who has never owned a deba, the Ume 150mm is where we suggest starting. The size suits trout, mackerel and other fish that fit on a home cutting board, and the Ume line is the most forgiving of the three standard Minonokuni lines.The deba is a single-bevel knife with a thick, heavy spine. The heel cuts through heads and collars, and the thinner forward edge glides along the backbone to lift each fillet. Learning that motion takes a few fish, and a forgiving edge makes the learning easier.
    Built for LearningUme uses a softer carbon steel than Take or Matsu. It is less likely to chip when a cut goes wrong, and it is the best of the three lines for learning to sharpen a single bevel. A Minonokuni 1000 grit waterstone is the stone to begin with. As skills grow, the Take 150mm deba in white steel is the natural next knife.For bigger fish and poultry, see the Ume 165mm deba. Our kitchen knife shapes guide shows how the deba is used alongside the yanagiba and usuba. Learn More
  • MAC Original 7.5-inch Chef and Utility Knife

    When you first pick up the MAC Original 7.5-inch Chef and Utility Knife, the immediate impression is one of lightness and balance. It is a thin, round-tipped blade that sits between a utility knife and a chef’s knife, for cooks who want a light everyday knife and do not need a sharp point.The thin Original Series blade passes through carrots and celery root with little wedging and slices tomatoes and cooked chicken cleanly. The rounded tip and the hanging hole near it are Original Series features, chosen for safety and for hanging the knife on a rack. The up-swept handle lifts the knuckles off the board during mincing.For a shorter version, see the UK-60. For a pointed knife of similar length, compare the Superior SA-80 or the Chef Series HB-70. Our kitchen knife shapes guide explains the chef’s and utility knife shapes. Learn More
  • MAC Original 6.5-inch Chef and Utility Knife

    The Mac Original 6 in Chef / Utility Knife is an all purpose kitchen knife that can be used as a chef knife or a utility knife. Rounded tip for safety, and hole near the tip for easy storage.

    Manufacturer: Mac Knife
    Blade Length: 6 in.
    Construction: High quality carbon stainless steel with ergonomic handle.
    Care: Hand wash only.
    Warranty: Lifetime warranty.
    Made in: Japan. Learn More
  • Kyocera 7-inch Edge Guard

    The largest Kyocera edge guard takes blades up to 7 inches, which covers the Innovation Black 7-inch Chef’s Knife, the 6-inch Chef’s Santoku, the Innovation White 7-inch Chef’s Knife and the 6-inch Nakiri. A chef’s knife carried to a cooking class or a family kitchen needs protection in transit, and Kyocera notes the guard is especially useful for travel. It encloses the blade in vented, BPA-free plastic. Learn More
  • Kyocera 5.5-inch Edge Guard

    Santoku owners need this size. The 5.5-inch Kyocera edge guard is made for the Innovation Black 5.5-inch Santoku and the Innovation White 5.5-inch Santoku in black, blue and red. With a guard, a santoku can be stored safely in a kitchen drawer or carried to a cooking class. Its vented BPA-free plastic covers the full edge and lets the blade air out. Learn More

Items 41 to 50 of 1489 total

per page

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7