Knives

Items 381 to 390 of 1489 total

per page

Page:
  1. 37
  2. 38
  3. 39
  4. 40
  5. 41
  • Victorinox Fibrox Pro 7-inch Super Flexible Fillet Knife

    The Victorinox Fibrox Pro 7-inch super flexible fillet knife has the most bend in the Victorinox fillet range. The blade hugs the contour of a fish, so it follows the backbone closely and separates skin from flesh with very little pressure.It is the knife for thin, delicate fish such as trout, perch and small flounder, where a firmer blade cuts into the bones. The flex also makes it a good skinning knife, keeping the edge flat against the skin so the fillet stays whole.Use a light touch. Let the blade bend over the rib bones instead of pushing through them, and draw it in long, smooth strokes toward the tail.Rinse it in fresh water after use around salt water.For a little more firmness, see the Fibrox Pro 7-inch Flexible Fillet Knife. For thick fillets and boning, the Fibrox Pro 7-inch Semi-Flexible Fillet Knife. The table in the Details compares the fillet knives. Learn More
  • Victorinox Hardwood 1.5 lb Meat Cleaver

    A meat cleaver is the tool for the jobs a knife should not do. This Victorinox Hardwood cleaver weighs about 1.5 pounds, and that weight carries the blade through poultry bones, ribs and tough cartilage with a controlled swing. It also splits dense vegetables such as butternut squash and pumpkin.The wood handle comes from the Victorinox Hardwood line, which Victorinox sold for decades as Rosewood. It is modified maple stained in the traditional rosewood color, with a secure, comfortable grip for heavy work.Use a heavy board that will not bounce, set the bone directly under the blade and let the cleaver’s weight do the work rather than forcing it. For thick beef bones, use a bone saw.For a lighter cleaver, see the Fibrox Pro 10 oz Meat Cleaver. For vegetables only, the Fibrox Pro 8-inch Chinese Vegetable Cleaver has a thin blade. The table in the Details compares all four Victorinox cleavers. Learn More
  • Victorinox Fibrox Pro 7-inch Meat Cleaver

    The Victorinox Fibrox Pro 7-inch meat cleaver weighs about 10 ounces, which makes it a lighter, quicker cleaver for poultry joints, ribs and other soft bones. It cuts cleanly through a chicken back or a rack of spareribs without the heft of a full-size butcher’s cleaver.The textured Fibrox Pro handle gives a secure grip when it is wet or greasy, which matters for every high-force task, and it keeps the hand comfortable through a session of breaking down birds.Use a heavy board, set the joint under the blade and chop with a firm, controlled stroke. The lighter weight rewards accuracy over force, so aim for the joint rather than through the middle of a bone.It is also a good first cleaver for home cooks.For thick bones and dense squash, the heavier Hardwood 1.5 lb Meat Cleaver carries more weight. For vegetables, see the Chinese vegetable cleaver. The table in the Details compares the cleavers. Learn More
  • Victorinox Hardwood 14-inch Slicer

    On a large roast, sawing back and forth tears the meat and spills its juices. The Victorinox Hardwood 14-inch slicer has the reach to finish each cut in a single, smooth pull, which keeps the slices intact on a slow-smoked brisket or a holiday prime rib.Its wood handle comes from the line Victorinox sold for many years as Rosewood and now calls Victorinox Hardwood. The handle is modified maple stained in the traditional rosewood color, which suits a carving board brought to the table.Steady the roast with a fork set away from the line of the cut, start at the heel of the blade and draw toward you. Keep the blade upright for even slices.For the same length with a synthetic handle, see the Fibrox Pro 14-inch Slicer. For Granton hollows in wood, see the Hardwood 12-inch Granton Edge Slicer. The table in the Details compares the slicers. Learn More
  • Victorinox Fibrox Pro 10-inch Round Tip Slicer

    A slicer has a long, narrow blade that cuts cooked meat in single strokes, and this 10-inch Victorinox version has a round tip. The rounded end keeps the knife safe on a carving station and in front of guests, and it lets the blade travel the full width of a roast without catching.Use it for roast beef, ham, turkey breast and pork loin. Draw the knife toward you in one long stroke from heel to tip for each slice; sawing back and forth tears the surface. The narrow blade has little drag, so thin slices come off whole.The textured Fibrox Pro handle keeps a secure, relaxed grip through a long service at the carving station.For Granton hollows at this length, see the Fibrox Pro 10-inch Granton Edge Slicer. The Fibrox Pro 12-inch Slicer gives more reach, and the Fibrox Pro 10-inch Semi-Flexible Carving Knife carves and fillets with a pointed tip. The table in the Details compares every Victorinox slicer. Learn More
  • Victorinox Fibrox Pro 12-inch Slicer

    The Victorinox Fibrox Pro 12-inch slicer makes clean cuts through large roasts, poultry and substantial vegetables. The 12-inch blade has the length to cross a prime rib or a whole turkey breast in a single, smooth stroke, which avoids tearing and gives a neat face on every slice.Start each slice at the heel and draw the knife toward you, letting the length of the blade do the work. Keep the blade upright for even thickness from top to bottom.Hold the roast with a carving fork set away from the line of the cut. The slim blade also cuts thin slices of cured meats and gravlax.A 12-inch slicer suits a buffet or a holiday table, where the roast is large and the slices should look the same from first to last.For Granton hollows at this length, see the Fibrox Pro 12-inch Granton Edge Slicer. The 10-inch round tip slicer is shorter, and the 14-inch is longer. The table in the Details compares every Victorinox slicer. Learn More
  • Victorinox Fibrox Pro 14-inch Slicer

    The Victorinox Fibrox Pro 14-inch slicer is the blade to use on oversized roasts such as a gooseneck round. Its long edge delivers smooth, consistent slices, and shawarma cooks use it to shave thin slices from a rotating spit where speed and a fine edge both matter.A blade this long lets one pull cross the widest roast, which gives the cleanest face on each slice. It also slices a whole smoked brisket across the grain without repositioning.Work on a large board, keep the free hand behind the line of the cut and let the blade travel its full length on each stroke.Hone the edge before each carving session so the long blade cuts cleanly from heel to tip.For Granton hollows at this length, see the Fibrox Pro 14-inch Granton Edge Slicer. The wood-handled 14-inch is the Hardwood 14-inch Slicer, and the 12-inch slicer is easier to manage on a small board. The table in the Details compares the slicers. Learn More
  • Victorinox Hardwood 10-inch Granton Edge Slicer

    The 10-inch Victorinox Hardwood Granton edge slicer is long enough to make clean, single-pass cuts through a turkey or a prime rib, yet nimble enough for smaller roasts, hams and large cakes. The Granton hollows along the blade reduce friction and keep meat from clinging, so slices come out uniform.The handle belongs to the Victorinox Hardwood line, sold for many years as Victorinox Rosewood. It is modified maple in the traditional rosewood color and suits carving at the table.Steady the roast with a fork, start each slice at the heel and draw the knife toward you. Wash the wood handle by hand and dry it after carving.The 10-inch length is easy to manage on a home cutting board and still crosses a turkey breast or a ham in one stroke, which keeps each slice smooth and whole.For more reach, see the Hardwood 12-inch Granton Edge Slicer. Pair it with the Hardwood 6-inch Straight Tine Fork. The table in the Details compares the slicers. Learn More
  • Victorinox Hardwood 12-inch Granton Edge Slicer

    The long, 12-inch blade of this Victorinox Hardwood slicer makes single, clean strokes through the largest roasts, hams and fish, so each slice stays intact. Granton hollows along the blade create air pockets between the knife and the food, which reduces friction and keeps meat from tearing or sticking.The handle comes from the line Victorinox sold for decades as Rosewood and now calls Victorinox Hardwood. It is modified maple stained in the traditional rosewood color.Hold the roast with a fork set well away from the knife and let the full length of the blade carry each slice. On a side of smoked salmon, angle the blade low for thin, wide slices.Hone it before each carving session to keep the edge aligned.For a shorter blade, see the Hardwood 10-inch Granton Edge Slicer. The Hardwood 12-inch Wide Granton Edge Slicer has a wider blade for straight lines. The table in the Details compares the slicers. Learn More
  • Victorinox Hardwood 10-inch Serrated Cake Knife

    Cutting a 10-inch cake into level layers without a mountain of crumbs takes a long, sharp serrated blade. This Victorinox cake knife has rounded scallops that slice through airy sponge cakes and dense cheesecakes cleanly, and the 10-inch length reaches across the whole cake.The handle is from the line Victorinox sold as Rosewood for many years and now calls Victorinox Hardwood. It is modified maple stained in the traditional rosewood color.To split a layer, set the cake on a turntable, rest the blade at the height you want and turn the cake against it while sawing gently. Wipe the blade between cuts through buttercream.A chilled cake cuts more cleanly than one at room temperature.For a bowed bread and cake knife, see the Hardwood 10-inch Bread and Cake Knife. The Hardwood 12-inch Serrated Slicer has a longer serrated blade in wood. The table in the Details compares the slicers. Learn More

Items 381 to 390 of 1489 total

per page

Page:
  1. 37
  2. 38
  3. 39
  4. 40
  5. 41