Knives

Items 331 to 340 of 1489 total

per page

Page:
  1. 32
  2. 33
  3. 34
  4. 35
  5. 36
  • Masahiro TX-104 8.25-inch (210mm) Chinese Cleaver

    Masahiro TX-104 Chinese Cleaver The Masahiro TX-104 is a full-size Chinese cleaver for cooks who prepare large quantities of vegetables and boneless proteins. Its long, tall blade slices, dices, minces and juliennes with long, efficient strokes, and its broad face carries a full board of prepared ingredients to the pan in one motion. Features Stainless-clad carbon steel: The high-carbon steel core takes a keen edge, holds it well and is easy to resharpen on waterstones. Stainless steel cladding covers the faces of the blade, so only the exposed edge requires the care of a carbon knife. Double-bevel edge: The edge is ground evenly on both sides, so it cuts straight and suits right- and left-handed cooks alike. Slightly curved edge: A gentle curve allows a light rocking motion for mincing herbs and aromatics, while the long flat section handles push cuts. Balanced weight: The added mass of the larger blade carries the knife through dense vegetables such as cabbage and winter squash flesh with less effort. Choosing a Cleaver The smaller, lighter Masahiro TX-101 Chinese Cleaver suits smaller hands and cooks new to the cleaver form. The TX-104 is a slicing cleaver, not a bone cleaver; its thin blade is not intended for chopping through bone. Learn More
  • Dexter-Russell Sani-Safe 10-inch Butcher Knife

    A 10-inch butcher knife is the workhorse of a meat room, heavy enough to break a pork loin into chops, portion a beef round or trim a whole brisket in long strokes. Dexter-Russell’s Sani-Safe version has a curved blade that rises to a pointed tip for piercing into a cut, and its length handles large primals that a chef’s knife cannot cross.Dexter chose a stainless, high-alloy steel for this line so the edge holds through a shift and comes back quickly on a steel. Butchers and barbecue cooks both buy this size from us, and it draws more search traffic than any other Dexter butcher knife on our site.
    8-inch or 10-inch?The Sani-Safe 8-inch Butcher Knife is easier to handle on smaller cuts and on a home cutting board. For slicing steaks from a boneless primal in a single pass, the Sani-Safe 10-inch Scimitar has a more sweeping curve. Learn More
  • I.O. Shen 6 in. (150mm) Niku Fish Filet Knife

    The I.O. Shen 6 in. (150mm) Fish Filet Knife made of I.O. Shen proprietary VG-10 Blend Triplex Technology is obviously unique as the blade is inverted from from the handle. The reversed edge makes this knife great for gutting freshwater fish and removing gills if you deal with a lot of trout, bass or catfish this will be a helpful knife. Learn More
  • Dexter-Russell Sani-Safe 8-inch Butcher Knife

    Not every kitchen has room for a 10-inch butcher knife. The 8-inch Sani-Safe keeps the same curved blade and pointed tip, which Dexter-Russell designs to pierce meat cleanly, in a size that fits a standard cutting board and a home knife drawer.It cuts pork shoulders into stew meat and trims beef roasts, and it handles the general meat cutting that a chef’s knife does awkwardly. The blade takes a fresh edge readily on a steel and does not stain from blood or brine. The handle is the same Sani-Safe grip found in commercial meat departments, so a home cook gets the knife a professional butcher would use. Dexter-Russell has made knives in Southbridge, Massachusetts since 1818, and it builds this one there.
    Choosing a Sani-Safe Butcher KnifeFor larger primals and long slicing strokes, step up to the Sani-Safe 10-inch Butcher Knife. For narrow, stiff work through joints, the Sani-Safe 8-inch Breaking Knife is the closer match. Learn More
  • Dexter-Russell Sani-Safe 12-inch Fish Splitter

    A fish splitter is a heavy, stiff knife for the jobs a fillet knife should never do, and it is built for splitting where a cimeter is built for slicing. Dexter-Russell’s Sani-Safe 12-inch splitter is built to take heads off large fish, cut bait, make chum and break down big fish before they are filleted. The H in the model number marks its heavier blade, which gives the backbone to drive through bone and cartilage. The blade is built to absorb the shock of heavy splitting without chipping, and it offers significantly more impact resistance than a Victorinox Fibrox, though it is slightly heavier.On a large tuna or halibut, the splitter roughs out the work at the cleaning table, and a flexible fillet knife takes over for the meat. It is also a capable bait knife on a party boat, where a long, sturdy blade makes short work of a pile of bunker or mackerel. It splits frozen bait as readily as fresh and takes the head off a large salmon as easily as a tuna. For delicate trout or small panfish it is too much knife, and a fillet knife is the better choice. Dexter honed and ground the blade at its Southbridge, Massachusetts plant. It suits commercial fishmongers, high-volume seafood processing plants and offshore charter captains who need a tool that can take a beating. Professional processors like the way the handle stays in the hand even when it is covered in slime, and the steel returns to a keen edge with a few strokes on a honing steel.
    Pairing a Splitter with a Fillet KnifeOnce the fish is broken down, a Sani-Safe 8-inch Wide Fillet Knife or a Dextreme Dual Edge 10-inch Stiff Fillet Knife handles the fillets. Learn More
  • Masahiro 7 in. (180mm) Deba Sheath

    This authentic Masahiro Saya is carved from Japanese Ho-wood (Magnolia), a material prized by bladesmiths for its low resin content and ability to resist moisture without imparting oils or odors to the steel. During hands-on testing with the MH16207 model, the tactile feedback of the friction fit is immediate. There is no rattle or lateral movement. The wood grain provides enough natural grip to hold the blade securely, yet releases smoothly when pressure is applied. Unlike plastic guards that can trap humidity against a carbon steel face—leading to rapid oxidation and pitting—the breathable nature of Ho-wood helps regulate the micro-environment around the blade. This is essential for maintaining the refined edge of a Deba used for heavy fish butchery. Handling the saya, you will notice the light, almost airy weight of the Magnolia wood, which adds negligible bulk to your knife roll while providing a rigid physical barrier against impact. Learn More
  • Masahiro 195 mm Deba Saya

    The Masahiro 195mm Deba Sheath (or saya) is made of Ho-Wood (Japanese Magolia Tree) and is used to protect your Traditional Japanese blade. These types of knives can vary slightly in shape and thickness, so if you have a brand other than Masahiro, the saya may not fit. These are raw wood and you may wish to treat the saya with mineral or chamomile oil which makes them more resistant to staining should they come in contact with food Learn More
  • I.O. Shen 11 in. (280mm) Suraisu Slicer

    The I.O. Shen Suraisu Slicer, developed by Cotswold’s Chef Wayne Sullivan, features an extended curve to its blade to mimic natural arm movement when slicing. It has a mid-sized handle which balances perfectly in the hand and is equipped with an Oriental tanto tip for precision. Learn More
  • I.O. Shen 20th Anniversary 8 in. Bunka Chef Knife

    To mark its 20th anniversary, I.O. Shen has released a new knife that merges design features from the Japanese Gyuto and Bunka knives. A key feature of the blade is its clip-point. This design involves the front section of the spine being shaped with a straight cut, which repositions the tip. This lower tip position allows for detailed and precise work without needing to raise the handle to a high angle. The clip-point is designed to offer greater control for such tip work where you may be using a tip-down pull stroke, or simply doing fine work like mincing shallots. The blade features a cambered edge towards the front, for rocking motion cuts, and a generous flat section of the blade toward the heel for tap-chop and push cuts. This hybrid knife seeks to combine the versatility of two popular Japanese knife types.  The proprietary Erdon steel is tempered to a 62 Rockwell hardness and is clad in soft jacket steel of the same material. Exceptional edge retention and durability with an ebonite handle that is waterproof as well as heat and chemical resistant.  The beautiful silver scrimshaw design is constructed of steel that is welded to the tang of this blade.  It's not just painted on.  Learn More
  • Dexter-Russell 3.375-inch Flat Handle Boning Hook

    A boning hook gives the off hand a secure grip on raw meat, so the knife hand can pull the cut open and see the seam. This Dexter-Russell hook is 3.375 inches long with a 13/64-inch stainless steel shank and a flat handle, and Dexter builds it to hold heavy sections of meat without bending or breaking. It pairs naturally with a boning knife such as the Sani-Safe 6-inch Narrow Boning Knife on the processing line. Learn More

Items 331 to 340 of 1489 total

per page

Page:
  1. 32
  2. 33
  3. 34
  4. 35
  5. 36