I.O. Shen 20th Anniversary 8.25-inch (210mm) Bunka Chef Knife

To mark its 20th anniversary, I.O. Shen released a knife that combines the gyuto and the bunka. Its defining feature is the clipped tip: the front of the spine is cut straight down, which lowers the point. With the tip closer to the board, fine work such as mincing shallots or tip-down pulling cuts can be done without raising the handle to a steep angle.

The edge is curved toward the front for rocking cuts and flat toward the heel for tap-chopping and push cuts, so one knife covers both styles. The ERDON core is tempered to HRC 62 and clad in softer jacket steel for durability. The ebonite handle is waterproof and resistant to heat and chemicals.

The silver scrimshaw design on the handle is steel welded to the tang, not paint.


Choosing a chef’s knife

For a conventional gyuto, see the 8.25-inch Chef Knife. For a bunka-style vegetable knife, compare the Oriental Slicer.

SKU: 4174

Availability: In stock

$219.95
  • Details

    Specifications

    • Type: Bunka-gyuto hybrid
    • Blade length: 8.25 inches (210mm)
    • Construction: I.O. Shen Triplex: an ERDON 62 hard steel core (HRC 62) between two layers of softer ERDON 10 stainless steel
    • Hardness: HRC 62 at the core
    • Edge: Hand-finished to 15 degrees per side
    • Handle: Ebonite, Tai Tang design with the I.O. Shen scrimshaw inlay; full tang
    • Spine thickness: 3.05mm
    • Hand finishing: About 7 hours per knife
    • Item number: 4174
    • Made by: Nirey knife factory, Taiwan
    • Country of manufacture: Taiwan

    The I.O. Shen Range

    KnifeBladeBest for
    Pointed Paring Knife105mmPeeling, hulling and fine tip work
    Oriental Parer (Mai Peng)105mmIn-hand work and mincing herbs
    Utility Knife125mmSmall slicing jobs, shallots and garlic
    6.5-inch Chef/Utility Knife165mmA compact chef’s knife
    Santoku160mmPush cuts and vegetables
    Oriental Slicer170mmVegetables, rock-chopping herbs, thin slicing
    8.25-inch Chef Knife210mmEveryday chef’s knife
    20th Anniversary Bunka Chef Knife210mmChef’s knife with a clipped tip for fine work
    9.5-inch Chef Knife240mmLonger strokes and larger work
    10.5-inch Chef Knife270mmHigh-volume prep on a large board
    Chinese Cleaver170mmHeavy chopping, small bones
    Maoui Deba170mmBreaking down fish and poultry
    Boning Knife170mmBoning meat, poultry and fish
    Niku Thin Boning Knife150mmFine boning and gutting small fish
    Flexible Filet Knife230mmFilleting large flatfish
    MSH Ryoba Carver200mmCarving meat and filleting fish
    Suraisu Slicer280mmLong slicing strokes
    Yanagiba270mmSashimi (right-handed)
    Left-Hand Yanagiba270mmSashimi (left-handed)
    Bread Knife250mmLarge crusty loaves

    Tips for Best Results

    The hard core takes and holds a fine edge. Sharpen on waterstones at about 15 degrees per side to keep the factory angle, and remove the burr with light alternating strokes.


    Care

    Hand wash and dry the knife after use; the ebonite handle is heat resistant but not dishwasher safe. Use a wood or soft synthetic cutting board, keep the edge off bone and frozen food unless the knife is made for it, and hone with a ceramic rod rather than a coarse steel.

    Additional Info

    Blade Length (Inches) 8.25 in.
    Blade Length (mm) 210 mm
    Blade Width (inches) No
    Grind 50/50 Bevel
    Steel Type No
    Rockwell Hardness 62
    Stainless Yes
    Handle Material Ebonite
    Spine Thickness (mm) 3.05
    Brand I.O. Shen
    Country of Manufacture Taiwan
    SKU 4174
    Manufacturer's Part Number 4174
    Manufacturer's Suggested Retail Price $302.84

    Write Your Own Review

    You're reviewing: I.O. Shen 20th Anniversary 8.25-inch (210mm) Bunka Chef Knife