Knives

Items 261 to 270 of 1489 total

per page

Page:
  1. 25
  2. 26
  3. 27
  4. 28
  5. 29
  • Dexter-Russell Sani-Safe 7-inch Narrow Fillet Knife with Scabbard

    A fillet knife on a boat needs somewhere safe to live between fish. This set pairs Dexter-Russell’s Sani-Safe 7-inch narrow flexible fillet knife with the WS-1 scabbard, a white polypropylene sheath with a riveted strap and belt loop, so the knife can ride on the hip at the cleaning station or go into a tackle bag without exposing the edge.The blade is narrow and flexible for panfish, trout and flounder, and it slides under the skin cleanly. During high-volume filleting, we recommend regular use of a ceramic honing rod to realign the flexible edge. Dexter grinds each blade individually. The scabbard holds a straight blade up to 9 inches, so it can later carry a longer Dexter fillet knife too, though it will not hold curved knives.Shoppers search our site for this exact knife-and-sheath pairing, and it is a practical first fillet knife for an angler who needs both.
    Choosing a Sheathed Fillet KnifeThe Sani-Safe 9-inch Fillet Knife with Scabbard suits larger fish. The scabbard alone is sold as the Dexter-Russell WS-1 Plastic Scabbard. Learn More
  • Dexter-Russell Sani-Safe 9-inch Narrow Fillet Knife with Scabbard

    A customer question on this knife’s page asks what makes the Sani-Safe 9-inch fillet knife different. The answer is its length. Nine inches is the longest of Dexter-Russell’s narrow flexible Sani-Safe fillet knives, enough blade to work along the full side of a salmon, a large striped bass or a lake trout without restarting the cut.The narrow blade still flexes for skinning, and the extra reach helps on broad fish where a shorter knife ends up sawing. It comes with Dexter’s WS-1 scabbard, which has a riveted belt loop and is sized for straight blades up to 9 inches. Dexter makes the knife in Southbridge, Massachusetts, and its knives sell especially well to our customers across New England and the rest of the Northeast.
    9-inch or Shorter?For trout and fish of moderate size, the Sani-Safe 7-inch Fillet Knife with Scabbard is easier to control. Without a sheath, the Sani-Safe 8-inch Narrow Flexible Fillet Knife is the in-between length. Learn More
  • Dexter-Russell Traditional 6-inch Flexible Boning Knife, Carbon Steel

    When the job is trimming a ham, skinning a chicken breast or following the curve of a rib cage, a flexible blade keeps more meat where it belongs. This 6-inch Traditional boning knife combines that flex with carbon steel and a wood handle, the classic Dexter-Russell build that has come out of Southbridge, Massachusetts for generations.Carbon steel takes a very sharp edge and is quick to touch up, which is why butchers and home processors who learned on it keep buying it. It does need care, since it will rust if left wet and gradually turns gray with use. These Traditional knives are especially popular with our customers in the Northeast.
    Flexible or Firm?For more backbone on beef and pork, the Traditional 6-inch Stiff Boning Knife (2315-6) or the Traditional 6-inch Narrow Boning Knife (1376N) will flex less. A stain-free flexible option is the Sani-Safe 6-inch Flexible Boning Knife. Learn More
  • Dexter-Russell Sani-Safe 3-Piece Cutlery Set

    Dexter-Russell’s Sani-Safe 3-piece cutlery set pairs a 10-inch cook’s knife with a 6-inch narrow boning knife and a 3.25-inch cook’s style parer, all with the same sanitary white handle. It is a sensible starter set for a culinary student or a new line cook.The cook’s knife does the dicing and chopping, and Dexter adds cutting raw or cooked meat to its jobs. The boning knife separates meat from bone and trims fat and silver skin, and the parer handles peeling and small trim work. Together they cover a full day of prep without a drawer full of knives.
    Building on the SetTo add a slicer and a scalloped chef’s knife with the same handle, see the Sani-Safe 10-inch Narrow Scalloped Roast Slicer and the Sani-Safe 10-inch Scalloped Chef’s Knife. Learn More
  • Dexter-Russell #0 Leather Sheath for Produce Knives, Up to 6-inch Blades

    Produce workers and farm-stand vendors carry a knife all day, and Dexter-Russell’s #0 leather sheath holds produce knives with blades up to 6 inches long on the belt. Slits near the top attach it to a belt, so the knife stays at hand in the field, the packing shed or the grocery aisle.Shoppers search for it as a produce knife holster and as a produce knife and sheath set.
    Produce Knives That FitBoth the Traditional 6-inch Produce Knife and the Sani-Safe 6-inch Produce Knife fit this sheath. Learn More
  • Dexter-Russell #1 Leather Knife Sheath, Fits Up to 9-inch Blades

    Dexter-Russell’s #1 leather sheath fits blades up to 9 inches long, which covers 8- and 9-inch fillet knives as well as boning and utility knives. It is the most visited sheath on our site, and anglers search for it as a Dexter fillet knife sheath.Slits near the top slip onto a belt, so the knife rides at the hip on a boat or at a cleaning table and stays protected in a tackle bag between trips. A wet knife should be dried before it goes back in, which keeps both the leather and the blade in good condition.
    Leather or Plastic?For a scabbard that can be rinsed out, see the WS-1 Knife Scabbard. Fillet knives that fit include the Sani-Safe 8-inch Narrow Flexible Fillet Knife. Learn More
  • Dexter-Russell #4 Leather Sheath for Skinning Knives

    Dexter-Russell’s #4 sheath is shaped for skinning knives, and hunters and meat processors search for it as a skinning knife sheath. Its form-fitting design holds the knife snugly, protecting the blade from damage and the hand from the edge during transport and storage.The full-grain leather and sturdy belt loop are made for carrying a knife in the field or the workshop. It is the second most visited Dexter sheath on our site.
    Skinning Knives to CarryDexter’s skinning knives include the Sani-Safe 6-inch Skinning Knife. Clean and dry the knife before sheathing it after field dressing. Learn More
  • Dexter-Russell Traditional 6-inch Narrow Boning Knife, Carbon Steel

    A thin, narrow blade reaches into places a wide boner cannot, such as the socket of a chicken thigh or the seam between muscles in a pork leg. Dexter-Russell describes this 6-inch Traditional knife as easy to maneuver around bones or under fat, and its carbon steel holds the fine edge that kind of work needs.Dexter lists it as NSF approved, unusual for a wood-handled knife, which makes it acceptable in many commercial kitchens as well as at home. The carbon steel sharpens quickly on a steel or stone. Expect the blade to darken over time, and dry it after each use to keep rust away. Knives in this Traditional pattern have sold steadily for decades, especially among customers in New England and the rest of the Northeast.
    Narrow, Wide or Stiff?The Traditional 6-inch Wide Boning Knife (1376) gives more blade for larger cuts, and the Traditional 6-inch Stiff Boning Knife (2315-6) resists flexing. For a stain-free narrow blade, see the Sani-Safe 6-inch Narrow Boning Knife. Learn More
  • Dexter-Russell Traditional 7-inch Wide Boning Knife, Carbon Steel

    The extra inch over the 6-inch 1376 matters on bigger animals. This 7-inch Traditional wide boning knife reaches across a hog shoulder or a beef round in fewer strokes, and its wide, carbon steel blade gives the stability to push through connective tissue without wandering.Dexter says this high-carbon blade holds a keen edge and sharpens easily, an advantage when a hunter is working through an animal in the field or the garage. The wood-handled Traditional construction has been part of Dexter’s line for generations. Hunters who process deer and elk at home and butchers who prefer carbon steel make up much of the market for this pattern, and customers in the Northeastern states have long favored it.
    Choosing a Traditional Wide BonerThe 6-inch 1376 is easier to control on pork and poultry, and the longer 8-inch 1378 suits large primals. All three share the same carbon steel and riveted wood handle. Learn More
  • Dexter-Russell Traditional 8-inch Wide Boning Knife, Carbon Steel

    At 8 inches, the 1378 is the longest of Dexter-Russell’s Traditional wide boning knives and the one for primals. It handles boning a whole beef chuck, taking a ham off the bone or breaking a deer hindquarter into roasts, where a shorter blade means more strokes and more ragged seams. The 8-inch blade also has the length to double as a fillet knife, and it is a popular choice for fish cutters who prefer a rigid blade, a favorite of many commercial and charter boat fishermen.Dexter-Russell credits the carbon blade with real sharpness and an edge that is easy to restore, and the long blade gives the leverage to follow a seam the full length of a large muscle. The riveted wood handle is the classic Traditional build that meat cutters have used for decades. Carbon steel needs to be dried promptly and will develop a gray patina, a trade many meat cutters accept for the way it sharpens.
    8-inch or Shorter?For smaller game and pork, the 7-inch 1377 or 6-inch 1376 gives more control. A long Sani-Safe 10-inch Scimitar is the better tool for slicing boneless primals into steaks. Learn More

Items 261 to 270 of 1489 total

per page

Page:
  1. 25
  2. 26
  3. 27
  4. 28
  5. 29