Knives

Items 1 to 10 of 13 total

per page

Page:
  1. 1
  2. 2
  • Miyabi Birchwood SG2 9-inch Honing Rod

    This 9-inch honing rod is made to match the Miyabi Birchwood line. Birchwood knives do not need regular honing; the rod is for the occasional touch-up that brings back the bite of an edge between whetstone sharpenings.Hold the rod vertically on the board and draw the knife down it at the same low angle as the factory edge, with light pressure and alternating sides. A few strokes are enough on a hard steel.It suits the Birchwood 8-inch chef’s knife and other Birchwood knives. Owners of Miyabi Black should use the Black tungsten honing rod. Learn More
  • Miyabi Black 5000MCD67 10-inch Tungsten Honing Rod

    Miyabi made this tungsten rod for the steel used throughout the Black series. Black knives do not need regular honing, but an occasional touch-up brings back the bite of the edge between whetstone sharpenings.Tungsten is hard enough to work on high-hardness Japanese steel. Use light pressure and the same low angle as the factory edge, a few strokes per side.It suits the Black 8-inch chef’s knife and the rest of the Black line; for Birchwood knives, see the Birchwood honing rod. Learn More
  • Wüsthof Ikon 10-inch Honing Steel, African Blackwood

    Built for Ikon owners, the Wüsthof Ikon 10-inch honing steel completes a set of Ikon knives with a handle that matches their African blackwood. Before you cook, two or three passes on each side push the edge of each blade back to center after everyday use has bent it slightly out of line.The 10-inch rod is long enough for the Ikon chef’s knife and bread knife, and it works on any straight-edged kitchen knife in the drawer, whatever the brand. Wüsthof’s care advice is to wipe it gently with a damp cloth and dry it right away.Once honing stops reviving a knife, sharpen it with the Wüsthof 10-inch ceramic sharpening rod or the two-stage hand-held sharpener. The steel is part of the Ikon 7-piece block set, and for the Classic Ikon line, see the Classic Ikon 10-inch honing steel. Technique is covered in our guide to honing rods. Learn More
  • Wüsthof Classic Ikon 10-inch Honing Steel

    Styled after the knives it serves, this Wüsthof Classic Ikon 10-inch honing steel matches their look and keeps their edges aligned between sharpenings. A few light strokes per side before cooking push the edge of the blade back to center, and the knife cuts cleanly again.The 10-inch rod covers every knife in a Classic Ikon block, from the paring knife to the 9-inch chef’s knife and the bread knife. The handle carries the same contour and riveted styling as the knives, so it sits naturally in the steel slot of a block set.For a knife that has gone dull, sharpen with the Wüsthof 10-inch ceramic sharpening rod or the two-stage hand-held sharpener. It is the steel included in the Classic Ikon 8-piece knife block set. For the Ikon blackwood line, see the Ikon 10-inch honing steel; the Knife Merchant honing steel guide shows the motion step by step. Learn More
  • F. Dick Red Spirit 10-inch Round Regular Cut Steel

    With its red handle, this 10-inch round steel completes the Red Spirit knife series and keeps those knives honed with a standard cut. Knives need regular attention on a steel to stay truly sharp, and this rod makes that part of the routine.The round shape is symmetrical in the hand and guides the knife in a smooth, even stroke. The handle holds firm in a wet hand. Ten inches is long enough for the Red Spirit chef’s knife and the AJAX, and it suits the series’ paring and boning knives too.Keep it by the board so a few strokes before each task become a habit, and the Red Spirit edge will stay keen between sharpenings.Pair it with the Red Spirit 8.5-inch chef’s knife or the Red Spirit Pit Master BBQ set. For the 10-inch Hektor scimitar, a longer rod such as the F. Dick 12-inch round steel with non-slip handle gives more room. Learn More
  • F. Dick 1905 10-inch Round Regular Cut Steel

    Matching the classic look of the 1905 knife series, this 10-inch round steel keeps those knives honed with a regular cut. It suits a home cook who wants the steel in the block to match the knives beside it.The regular cut realigns an edge that has rolled with use, so the knife keeps cutting cleanly and needs abrasive sharpening less frequently. Ten inches covers 1905 knives up to the 8-inch chef’s knife, with room for a full stroke. The handle and rod join without a gap, which keeps the steel easy to clean.Hang it by the stove, or keep it in the block beside the knives it serves.Pair it with the 1905 8-inch chef’s knife or the 1905 6-piece magnetic knife block set. For longer blades, a 12-inch rod such as the EuroCut 12-inch Round Regular Cut Steel adds reach, and a wood-handled steel is the F. Dick Honorary steel. Learn More
  • Messermeister Oliva Elite 10-inch Fine Grit Honing Steel

    Messermeister says its Oliva Elite fine grit steel hones and realigns blades, keeping knives sharp and precise for daily use. A few light strokes on each side of the edge before cooking straighten the fine edge of a German knife as it bends in use, which extends the time between sharpenings.The 10-inch length handles chef’s knives up to 8 inches with room to spare, in line with Messermeister’s guidance to choose a steel about 2 inches longer than your longest knife. Its olive wood handle matches the Oliva Elite knives, so it can sit in the same block or on the counter beside them.
    Learn to HoneOur guide to honing steels covers technique. Learn More
  • Kikuichi Carbon Elite 7-Piece Knife Block Set

    Kikuichi Carbon Elite 7-Piece Knife Block Set The Kikuichi Carbon Elite 7-Piece Knife Block Set equips a kitchen with a complete range of carbon steel knives, from detail work to long slicing, along with the block to store them and the rod to maintain them. It suits experienced home cooks and professionals who want the sharpness and easy resharpening of carbon steel across every task, with matching handles and balance throughout. The Knives 120mm Parer: Peeling, trimming and detail work in the hand or on the board. 150mm Honesuki: A Japanese boning knife for breaking down poultry and separating meat at the joints. 180mm Santoku: A compact all-purpose knife for slicing, dicing and mincing vegetables, fish and boneless meat. 210mm Gyuto: The Japanese chef’s knife and the workhorse of the set, with a thin profile that moves through dense vegetables without wedging. 240mm Sujihiki: A long, narrow slicer for carving roasts and portioning fish in a single stroke. Why Carbon Elite Every knife in the set is made from SK-4 high-carbon steel, a single steel throughout rather than a clad blade. SK-4 takes a keen edge and is easy to restore on a waterstone, which makes the set a practical introduction to carbon steel for cooks who sharpen their own knives. The included Kikuichi 10.5-inch Ceramic Honing Rod realigns the edges between sharpenings, and the Kikuichi 6-Slot Knife Block keeps the edges protected, with one slot free for an additional knife such as the Carbon Elite 150mm Petty. Learn More
  • Kikuichi Carbon Elite 3-Piece Professional Starter Set

    Kikuichi Carbon Elite 3-Piece Professional Starter Set The Kikuichi Carbon Elite 3-Piece Professional Starter Set gives culinary students and working cooks a carbon steel chef’s knife, the honing steel to maintain it and a bag to carry it, chosen to work together from the first day. It is a practical first step into carbon steel for cooks who want a sharper, more easily restored edge than a typical stainless knife provides. What Each Piece Does Kikuichi Carbon Elite 210mm Gyuto: The Japanese chef’s knife handles most prep on the station, from dicing vegetables to trimming and slicing proteins. Its SK-4 high-carbon steel takes a keen edge and is easy to restore on a waterstone, and its thin profile moves through dense produce without wedging. F. Dick EuroCut 12-inch Round Regular Cut Steel: A few light strokes before and during service realign the edge as it rolls with use, so the gyuto cuts cleanly for longer between sharpenings. Knife Merchant 8-Slot Knife Bag: Separate slots keep the edges from contacting one another in transit, with room to add knives as the kit grows. Building the Kit A parer is the most common second knife. The Kikuichi Carbon Elite 120mm Parer and the Carbon Elite 150mm Petty match the gyuto in steel and handle. For a complete collection, see the Kikuichi Carbon Elite 7-Piece Knife Block Set. Learn More
  • Miyabi Evolution 3-Piece Starter Cook Set

    Precision Refined: The Miyabi Evolution Starter Set for Elite Performance The Apex of Hybrid Engineering For the chef who demands the surgical precision of Japanese blades without sacrificing the robust 'workhorse' feel of Western cutlery, the Miyabi Evolution 8-inch Chef Knife is the definitive answer. Crafted in Seki, Japan, the heart of samurai sword-making, this set represents a significant leap in metallurgical technology. The core is constructed from FC61 fine carbide steel, which undergoes a specialized FRIODUR® ice-hardening process. The result is a staggering 61 Rockwell Hardness (HRC) that maintains a scalpel-like edge significantly longer than standard stainless steel, yet remains remarkably resilient against chipping. A Masterclass in Maintenance and Mobility Even the finest Japanese steel requires expert maintenance. This 'Gold Standard' starter set includes the legendary F. Dick EuroCut 12-inch honing steel. Made in Germany, this regular-cut steel is specifically chosen to align the 50/50 bevel of the Miyabi Evolution, ensuring your edge remains optimized for every shift. To protect your investment, we have paired these essentials with the Knife Merchant 8-Slot Knife Bag. Whether you are a culinary student moving between labs or a professional traveling between kitchens, this heavy-duty bag offers the reinforced storage needed for high-carbon tools. This isn't just a purchase; it's an investment in a lifetime of precision. Learn More

Items 1 to 10 of 13 total

per page

Page:
  1. 1
  2. 2