Knives

Items 1 to 10 of 56 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • MAC Chef Series 5.5-inch Non-Stick Utility Knife

    Starchy potatoes, sushi rolls and soft cheese cling to bare steel, and the BF-HB-55 puts a black fluorine resin non-stick coating on the 5.5-inch Chef Series utility blade. It is a small knife for clean release on sticky food.The flat profile allows short vertical chops, so it handles shallots and scallions on the board as well as slicing small rolls and cucumbers. The coating covers the blade faces; the edge is bare steel and is sharpened in the normal way.The uncoated HB-55 is otherwise the same knife. For a larger coated blade, see the 7-inch BF-HB-70 gyuto. Our Kitchen Knife Shapes guide explains the utility knife shape. Learn More
  • MAC Chef Series 10-inch Chef’s Knife

    Cooks who break down large produce or slice roasts for service need length more than weight, and the BK-100 provides 10 inches of thin Chef Series blade without the mass of a forged knife. The smooth face and plain heel make it the simplest long knife in the MAC line to sharpen.On a large board it handles a head of cabbage, a pineapple or a stack of herbs in fewer strokes than an 8-inch knife, and the length gives room to slice a roast or a side of salmon in one pull. On a small board the extra length is harder to manage, and the 8-inch BK-80 is the better choice.The TH-100 adds dimples to this blade. The Professional MBK-110 and the Ultimate SBK-105 are the heavier long knives, with bolsters. Our knife shapes guide covers the shapes in more detail. Learn More
  • MAC Chef Series 8-inch Chef’s Knife

    The BK-80 is MAC’s plain-faced 8-inch chef’s knife: a thin, light Chef Series blade with no dimples and no bolster. It is a straightforward first Japanese knife for a home cook moving up from a heavier German blade, and a light everyday knife for a cook who works a station.Mincing herbs, dicing onions and slicing chicken breast are the jobs it is made for. The tip is fine enough for detail work, and the edge has a gentle curve that allows a rocking cut. A smooth blade face is easier to wipe and to sharpen than a dimpled one, though starchy vegetables will cling to it more readily.For that release, choose the TH-80 with dimples or the Professional MTH-80. For a narrower, lower-cost 8.5-inch knife from the same series, see the HB-85. Read our kitchen knife shapes guide for the difference between a gyuto and a Western chef’s knife. Learn More
  • MAC Chef Series 6-inch Straight Boning Knife

    The MAC Chef Series 6-inch Boning Knife has a large contoured handle that can be held in a standard or reverse grip. The blade is straight along the spine, with a cutting edge that curves to meet the tip. This blade shape moves easily around bones, through joints and along a fat cap.It is suited to work with meat, fish or poultry, and is a good choice for cooks, cutters, hunters or fishermen: boning chicken thighs or trimming silver skin from a tenderloin. The MAC steel holds an edge longer than most boning knives, yet it can still be maintained with a honing rod. This is a very practical knife choice for professionals looking for high performance at a mid to low price point.For more curve and a textured handle, see the curved PB-60. For longer cuts, the 8-inch BNS-80. Our Kitchen Knife Shapes guide explains boning knives. Learn More
  • MAC Chef Series 8-inch Boning and Fillet Knife

    MAC lists the BNS-80 as an 8-inch straight boning knife, and its long, narrow blade also serves as a fillet knife for fish. The MAC steel holds an edge longer than the steel used in most boning knives, which helps when filleting a run of fish or trimming a whole brisket.The extra length over the 6-inch BNS-60 lets you lift a whole side of salmon from the frame in one pass and trim long muscles such as a pork loin. The blade is firm enough to follow the bones without wandering. Despite its edge retention, it can still be maintained with a honing rod.For a more flexible fillet blade, compare the Original FK-70 or the Superior SF-85. Our Kitchen Knife Shapes guide explains the difference between boning and fillet knives. Learn More
  • MAC Japanese Series 6-inch Honesuki

    A honesuki is the Japanese poultry boning knife: a stiff, triangular blade with a sharp point, used to separate a chicken at the joints and take the meat from the frame. The MAC BON-60 is a wedge-shaped knife for cutting up and deboning a chicken and for other butchering duties.The point slips into the hip and shoulder joints, and the tall heel gives the weight to pop the joint without twisting the edge. Because the blade is stiff, it is better than a flexible boning knife for breaking down a whole bird, frenching chicken wings and removing the oyster.For a Western-style boning knife, see the BNS-60 or the curved PB-60. Our Kitchen Knife Shapes guide explains the honesuki. Learn More
  • MAC Chef Series 8.25-inch Non-Stick Sushi Chef’s Knife

    Cutting maki cleanly takes a sharp, light blade that rice will not grab, and the BSX-85 is the longer of MAC’s coated knives for that work. Its 8.25-inch blade lets a sushi maker slice a full roll with one draw, and the non-stick surface lets rice and nori fall away rather than tearing.Outside of sushi, the coating helps with starchy and sticky ingredients such as potatoes and soft cheese. The thin Chef Series blade underneath keeps cuts precise, and the edge is bare steel sharpened like any other MAC.For a shorter coated knife, see the 7-inch BF-HB-70. For raw fish and sashimi, the traditional knife is a single-bevel yanagiba. Our Kitchen Knife Shapes guide compares the yanagi with the chef’s knife. Learn More
  • MAC Original 9-inch Wide Carving Knife

    The CK-90 is the carving knife of the MAC Original Series: a thin 9-inch blade, wider than a slicer, for ham, roasts and turkey, and even large fruits and vegetables. The hole near the tip allows you to hang the knife for storage.The width keeps the blade straight through a tall roast, so each slice has an even thickness top to bottom, and the thin Original Series steel slips through cooked meat with little drag. It also makes neat work of a melon or a pineapple.The CK-90 is part of the Original 4-piece set. For longer slicers, compare the MKS-105 and the SL-115. Our guide to kitchen knife shapes explains carving and slicing knives. Learn More
  • MAC Original 6.75-inch Fillet Knife

    The FK-70 is a thin, flexible fillet knife in the MAC Original Series, made for better control when filleting fish. The flex lets the blade bend along the backbone and over the rib cage, so more of the fillet comes away from the frame.It has the rounded tip and the hanging hole of the Original Series. It is extremely sharp out of the box and has a very comfortable handle. Beyond fish, the thin blade slices sushi rolls, ham, bread and even cakes neatly. The knife is also part of the Original 3-piece set.If you would rather not have the hole in the blade, the FK-70N is the same knife without it. For a longer fillet knife, see the SF-85. Our guide to kitchen knife shapes covers fillet knives. Learn More
  • MAC Original 6.75-inch Fillet Knife, No Hole

    The FK-70N is the same knife as the FK-70, without the hanging hole near the tip. Some cooks and processors prefer a solid blade, which leaves nothing to catch fish scales or residue and presents a clean face.The thin, flexible Original Series blade bends along the backbone of a trout or a snapper and over the rib bones, lifting the fillet with little waste. The rounded tip is kept from the original design. It also slices smoked salmon and cured meats thinly.For a longer fillet knife, compare the SF-85. Our Kitchen Knife Shapes guide explains fillet knife flex. Learn More

Items 1 to 10 of 56 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5