You have no items in your shopping cart.
Sharpening Stones
-
Pride Abrasive Water Stone Set
Pride Abrasives Water Stone Set comes with three grit varieties.
The 1,000 grit cuts fast and should be used on dull knifes to establish an edge (form a burr).
The 3,000 Grit is ideal for edge maintenance, the edge will be refined and suited for vegetables coming off of this grit but not polished, (for meat and fish).
The 6,000 grit water stone can be used to further refine and maintain already sharp knives, it can be used to smooth/ remove the wired edge and it will polish your knives for a longer lasting edge.
Water Stones need water and slurry to work properly. Ensure that your stone is fully soaked through before use. Immerse in water, wait for bubbles to stop, low grit stones need more water. Made in USA. Learn More$190.00 -
Masahiro 1500 Grit Waterstone
Achieve a Sharp Edge with the Masahiro 1500 Grit Waterstone The 1500 grit surface is perfectly suited for routine maintenance, allowing you to quickly touch up and restore the keenness of your knives without excessive metal removal. This Masahiro waterstone comes permanently attached to a sturdy, non-slip stand. The stone thickness of one inch is larger than most stones and creates excellent longevity. For most kitchen uses, 1500 grit is all that is needed for a slightly toothy edge that excels on products like tomatoes and waxed vegetables. If a fine polish is desired for use on proteins, we recommend finishing on the Masahiro 3000 grit stone. Soak the stone in water before use to ensure optimal performance. For best results and to maintain a flat sharpening surface, it is also advisable to use a flattening stone as needed. Learn More$64.25 -
Norton Complete Waterstone Kit
The Norton Complete Waterstone Set comes with 4 full sized (8x3x1 in) stones in 220, 1000, 4000, and 8000 grit. Each stone comes in its own storage case that doubles as a stone holder. This complete set includes every grit needed for the home or professional sharpener. Learn More$349.95 -
Norton 4000 Grit Waterstone
Norton 8x3x1 inch, full size 4000 grit waterstone is used to polish and refine the edge of an already sharp knife. Generally used to remove grind marks left behind from coarser grits used in initial stages of sharpening. Learn More$110.00 -
Norton Silicone Carbide Flattening Stone
- Dimensions: 9 in. x 3 in. x 3/4 in.
- Coarse grit silicon carbide stone.
- Superbly flat with hard bond.
- Promotes maximum cutting for all grit sizes of water stones.
- Provides swarf removal.
- Produces extremely flat results on all water stones, ceramic or traditional. Soak the flattener in water for at least 10 minutes prior to use. Learn More$41.95 -
Norton 220 Grit Waterstone
Norton 220 grit Waterstone is 8x3x1 inch Waterstones are for experienced sharpeners. A stone in this grit range is used for tip repair, chip removal and blade thinning. Learn More -
Minonokuni Sharpening Stone Set
This is the Minonokuni 3 piece sharpening stone bundle. These are fantastic stones for any sharpener due to their quality and sharpening properties.
Items Included: 220 Grit - Great for very dull or damaged knives. Use this stone to form a burr and set a bevel.
1000 Grit - Maintenance stone for touching up dull knives. Frequently used to refine or continuing to establish the bevel and form a burr.
4000 Grit - The finest grit stone in this set. Intended to polish the marks left from the previous stones so the knife's edge is as smooth as possible. Ideal for cutting fish and meat.
Made in: Japan Learn More -
Norton 8000 Grit Waterstone
Norton 8x3x1 inch 8000 Grit Waterstone is used for a high degree of polish on a knife. Generally, stones in this range are used on traditional Japanese knives to smooth grind marks along the shinogi line and minimize drag. For general use like cutting tomatoes, this may be too high a degree of sharpening. When slicing meats and fishes you benefit from this mirror finish sharpening. Learn More$150.00 -
Pride Abrasive 3000/8000 Grit Combination Stone
Pride Abrasive 3000/8000 Grit Combination Waterstone is made in Bristol, Wisconsin using the finest available ingredients, this is done so that the stone will last without constant re-flattening and that the abrasive content is high enough in the stone to move hardened steel. The 3000 grit is a maintenance stone for daily touch ups to otherwise fairly sharp knives. The 8000 grit will smooth and refine the work done by the 3000, however the 8000 grit will begin to polish the steel this is necessary for the cutting of protein. Made In USA. Learn More$79.95 -
Masahiro 600 grit Waterstone
A fast-cutting 600 grit waterstone that removes material quickly while leaving an edge refined enough to move directly to 3000 grit. The Masahiro 600 Grit is the stone to reach for when a knife has fallen past maintenance and needs to be brought back efficiently. It cuts quickly and predictably, making it easy to re-establish an edge without overworking the blade. What sets this stone apart is the finish it leaves. Unlike most stones in this range, it produces a cleaner scratch pattern, which allows you to move straight to a 3000 grit for refinement. You can skip the 1000 grit step entirely if you prefer a more efficient progression. This makes it especially useful for routine edge recovery on working knives, perfect for when the edge is worn down but not heavily damaged. It will raise a consistent burr quickly, with clear feedback throughout the stroke. You can feel exactly when the edge is ready to move on, which helps maintain control over pressure and angle. This is not a heavy repair stone. For large chips or full reprofiling, a coarser grit is still required. Soak the stone before use and keep the surface wet during sharpening. Like all waterstones, it will wear over time and should be flattened periodically to maintain a consistent surface. Learn More$55.00
