Ceramic Sharpening Rods

The WÜSTHOF 10" Ceramic Sharpening Rod J800 is best for dull to moderately sharp knives. The ceramic surface ensures exceptional sharpening of the blade: with just a few steps you can achieve the desired result. As this sharpener removes a tiny amount of metal from the knife, we recommend using a WÜSTHOF Honing Steel for daily or weekly edge maintenance. JIS800 (Japanese Industrial Standards) Grit 800 this Ceramic Sharpening Rod is intended to put a small bevel on either side of the kitchen knife. (NOT Honing) This rod will put a good ruff edge on your knife with just a few passes, an edge that is ideal for cutting through vegetable skin (tomato, bell pepper) and making thin more even slices. This ceramic rod works very well with Japanese knives that are hard with high rockwell hardness scores but also works very well on German knives that have lost their edge.    Learn More

A ceramic sharpening rod differs from a steel honing rod in that it is intented to remove a bit of metal. A steel honing rod is intended to straighten the edge of a softer (German/American) steel knife that has rolled with use. A ceramic rod will remove the burr from an edge and may be used in conjunction with a fine steel honing rod. Ceramics are often preferred for hard Japanese steels that tend to dull without the edge rolling. As a rule of thumb, we use ceramic on steels greater than 60 Rockwell hardness.  Learn More

Unlike a honing steel that only realigns an edge, Idahone’s ceramic rod removes metal to sharpen and polish. It is ideal for harder steels that tend to wear down rather than roll. Knife Merchant Tip:  A ceramic rod will eventually clog with metal buildup which greatly decreases the abrasiveness. When you see a significant build-up of grey streaks, the rod can be cleaned with an Idahone Ceramic Eraser or scrubbed with Bar Keepers Friend. Learn More

F. Dick 10 in. Dickoron "Dick Duo" Diamond/Ceramic Combination Steel is a great tool to use for quick sharpening when your knife needs a little more attention than normal. This ceramic sides are oval and there are round diamond rods on the opposite sides. 1000 grit Ceramic for finishing and/or basic touch up sharpening, diamond for cutting a new edge. This is a very unique sharpening product to allow you to put either a rough diamond finish or a smoother ceramic finish on your knife. If you have lost your edge through heavy use this tool will allow you to put a new beveled edge to your knife and you can skip the stones or the draw sharpeners. Ceramic is delicate so be sure to care for this tool and store it where it will not be dropped. Made in Germany. Learn More

Precision Edge Realignment for High-Performance Cutlery For the professional chef maintaining a kit of high-Rockwell steel, a standard steel honing rod is often insufficient. The Idahone 10-inch Ceramic Rod provides a superior alternative, utilizing high alumina ceramic to gently remove microscopic amounts of metal while realigning the edge. Unlike traditional steels that merely push a rolled edge back into place, this ceramic rod acts as a high-grit abrasive, equivalent to a 3000-3500 grit Japanese waterstone. This specific rod is optimized for blades with a Rockwell hardness of 61 or greater—common in premium Japanese cutlery like Shun, Miyabi, and Global. Because high-HRC steel is more brittle, it requires the gentle, consistent abrasive action of ceramic to prevent chipping while achieving a polished, razor-sharp finish. The 10-inch length provides ample surface area for long chef's knives and sujihikis, allowing for a full, smooth stroke that ensures uniform sharpening from heel to tip. The handle is crafted from Hard Rock Maple, finished in a durable black coating, and ergonomically shaped for a secure grip during high-volume prep. This tool is not just a sharpener; it is a vital instrument for daily maintenance, extending the time between heavy grinding sessions and preserving the life of your most valuable cutlery investments. Learn More

Ultra-fine ceramic rod for daily use - maintain your edge without wearing down your knives. The Kikuichi 10.5-inch Ceramic Honing Rod is designed specifically for maintaining high-carbon and high-hardness Japanese knives. At 8000 grit, this rod behaves very differently from typical ceramic or steel honing rods. While it does remove material, it does so in extremely small amounts - effectively burnishing and refining the edge rather than aggressively grinding it. The result is a rod you can use every day without concern, keeping your knives aligned, polished, and performing at their best. Learn More