FREE SHIPPING ON ORDERS OVER $75

WITHIN THE CONTINENTAL UNITED STATES
Menu
  • Home
  • F. Dick Dickoron Duo 10-inch Diamond and Ceramic Steel

F. Dick Diamond Ceramic Steel Click To View Larger Image

F. Dick Dickoron Duo 10-inch Diamond and Ceramic Steel

When a knife needs more attention than routine honing, the Dickoron Duo can cut a fresh edge and refine it on one rod. F. Dick makes it for sharpening and honing hard grades of steel.

Two sides are diamond rods carrying millions of diamond grains, which remove metal and sharpen. The other two sides are ceramic, which smooths and straightens the edge after the diamond. A knife that has lost its edge through heavy use can get a new bevel on the diamond side and a smoother finish on the ceramic, which can save a trip to the stones.

It is a good tool for a knife roll.

For routine honing of hard knives, the Dickoron Titan 12-inch oval steel is the everyday rod. A diamond-only rod with a non-slip handle is the F. Dick 10-inch oval diamond sharpening steel. Our honing steel guide explains when to sharpen and when to hone.

SKU: D7 9302 25

Availability: In stock

$133.25

    • Details

    Specifications

    • Rod length: 10 inches (25 cm)
    • Surface: Two diamond sides, two ceramic sides
    • Series: Dickoron Duo
    • Handle: Acrylic
    • Made in: Germany
    • Item number: 7930225

    Which Cut Do You Need?

    • Regular cut: pronounced grooves remove a little metal and leave a slightly toothy edge; F. Dick calls it first aid for knives that are no longer very sharp.
    • Fine cut: removes less metal and mainly straightens a rolled edge for a smoother result.
    • Sapphire and ultra-fine cut: the Dickoron cuts, made for frequent, gentle honing of an edge that is already sharp.
    • Polished: no abrasion; straightens and polishes, and can follow a coarser steel.

    Dickoron Steels Compared

    The Dickoron family is F. Dick’s top range of steels; the sapphire cut is used only in this family.

    SteelLengthShapeSurface
    Dickoron Classic 12-inch Round Sapphire Cut Steel12 in. (30 cm)RoundSapphire cut
    Dickoron Classic 14-inch Round Sapphire Cut Steel14 in. (35 cm)RoundSapphire cut
    Dickoron Classic 12-inch Oval Sapphire Cut Steel12 in. (30 cm)OvalSapphire cut
    Dickoron Micro 12-inch Oval Super Fine Cut Steel12 in. (30 cm)OvalUltra-fine cut
    Dickoron Polish 12-inch Oval Polished Steel12 in. (30 cm)OvalPolished
    Dickoron Combi 12-inch Square Sapphire and Polished Steel12 in. (30 cm)SquareSapphire cut and polished
    Dickoron Hygienic Combi 12-inch Round Steel12 in. (30 cm)RoundRegular and ultra-fine cut
    Dickoron Multiron 12-inch Oval Steel12 in. (30 cm)OvalFine and regular cut
    Dickoron Titan 12-inch Oval Coated Steel12 in. (30 cm)OvalUltra-hard special coating
    Dickoron Duo 10-inch Diamond and Ceramic Steel10 in. (25 cm)RoundDiamond and ceramic

    Tips for Best Results

    Use the diamond sides with light pressure only until the edge is restored, then finish with a few strokes on the ceramic. Keep the angle steady, anywhere from 15 to 25 degrees.


    Care

    Ceramic is brittle, so keep the steel where it cannot fall onto a hard floor. Wipe the rods clean after use and dry them before storing.

    Additional Info

    SKU D7 9302 25
    Cut N/A
    Handle Material Acrylic
    Material Ceramic
    Brand Friedrich Dick
    Country of Manufacture Germany
    Manufacturer's Part Number 7930225
    Manufacturer's Suggested Retail Price $205.00

    Write Your Own Review

    You're reviewing: F. Dick Dickoron Duo 10-inch Diamond and Ceramic Steel

    © 2002-2026 Knife Merchant Alcoa, Tennessee. All rights reserved.