F. Dick ErgoGrip 10-inch Bull Nose Butcher Knife

Cutting steaks from a whole rib or strip loin goes faster with a 10-inch bull nose blade, which finishes a wide steak in one stroke. This ErgoGrip knife trims and portions beef at a meat counter or on a processing line.

The rounded tip lets the cutter start the stroke without the point snagging. The tall, flat blade keeps the cut vertical, so each steak comes off at an even thickness from edge to edge. A pronounced finger guard on the handle keeps the hand back from the edge on long pulls.

The same knife trims the fat cap and tail before portioning, so one blade covers the whole job on a strip. That keeps the station simple when the counter is busy.

For the largest primals and for big fish, the 12-inch bull nose butcher knife adds reach. The shorter 9-inch and 8.25-inch versions are handier on smaller cuts, and the 10-inch scimitar sweeps up for trimming fat caps.

SKU: D8 2385 26

Availability: In stock

$37.70
  • Details

    Specifications

    • Blade length: 10 inches (26 cm)
    • Type: Bull nose butcher knife
    • Series: F. Dick ErgoGrip
    • Steel: X55CrMo14 stainless steel
    • Hardness: 56 HRC
    • Handle: ErgoGrip plastic
    • Spine: Rounded
    • Certification: NSF
    • Made in: Germany
    • Item number: 8238526

    Special Orders

    F. Dick makes this knife in other handle colors and sizes. If we do not carry the one you need, call our store at 1-800-714-8226 and we will special order it from Germany. Please allow a few weeks for delivery.


    Bull Nose Butcher Knives and Scimitars

    Both shapes are made for long, single strokes through meat. The bull nose has a broad, rounded tip; the scimitar sweeps up into a long curve. Our guide to kitchen knife shapes shows the two profiles.

    KnifeShapeLengthTypical work
    ErgoGrip 8.25-inch Bull Nose Butcher KnifeBull nose8.25 in.Portioning steaks, trimming
    ErgoGrip 9-inch Bull Nose Butcher KnifeBull nose9 in.Portioning steaks, breaking down cuts
    ErgoGrip 10-inch Bull Nose Butcher KnifeBull nose10 in.Larger primals, steaks
    ErgoGrip 12-inch Bull Nose Butcher KnifeBull nose12 in.Whole primals, large fish such as tuna
    ErgoGrip 12-inch Bull Nose Butcher Knife, Black HandleBull nose, black handle12 in.As above, for color-coded stations
    ErgoGrip 10-inch ScimitarScimitar10 in.Trimming fat cap, portioning steaks
    ErgoGrip 12-inch ScimitarScimitar12 in.Steaks from whole primals

    Tips for Best Results

    Hone the edge on a steel through the shift rather than waiting for it to go dull. Our best-selling steel overall is the EuroCut 12-inch Round Regular Cut Steel; serious professionals who want a finer finish choose the Dickoron Micro 12-inch Oval Super Fine Cut Steel. A steady angle somewhere between 15 and 25 degrees is fine. Our guide to honing steels walks through the technique.


    Care

    Wash by hand in warm water with a mild detergent, rinse, and dry the knife before putting it away. Store it in a scabbard, sheath or blade guard so the edge does not knock against other tools.

    Additional Info

    Blade Length (Inches) 10 in.
    Blade Length (mm) 250 mm
    Blade Width (inches) No
    Grind 50/50 Bevel
    Steel Type X55CrMo14
    Rockwell Hardness 56
    Stainless Yes
    Handle Material Plastic
    Spine Thickness (mm) No
    Brand Friedrich Dick
    Country of Manufacture Germany
    SKU D8 2385 26
    Manufacturer's Part Number 8238526
    Manufacturer's Suggested Retail Price $58.00

    Write Your Own Review

    You're reviewing: F. Dick ErgoGrip 10-inch Bull Nose Butcher Knife