You have no items in your shopping cart.
F. Dick Honing Steels
For the last two hundred years, F. Dick steels have been widely recognized as the best made at world fairs and other competitions. Professional butchers likely have the best understanding of steels, or honing rods. Their work demands they start with a very sharp edge and they hone their knives every ten to fifteen minutes while working. Nearly all butchers use a polished or fine cut steel because they remove a minimum amount of metal from the edge of the knife. They will only realign the existing edge, which is what a steel is designed to do.
Our recommendation is to work with a very fine stone to rebuild your edge and a fine-cut F. Dick steel to keep it straight. When you are working as a carver / butcher, honing your knife four to six times an hour, for a full shift, you will probably want to use a Friedrich Dick polished steel in order to avoid wearing the edge down. Most cooks hone the knife before starting work or after taking it to the sharpening stone. For them, the F. Dick regular cut steel works well. If you keep the knife edge aligned, you won’t have to grind a new edge as often and the knife lasts longer.
-
F. Dick 10-inch Round Fine Cut Sharpening Steel, Red Handle
Butchers, meat processors, fishmongers and line cooks hone constantly through a shift, and this is the kind of steel they reach for. A fine cut has a little texture, enough to bring back the edge on German and American knives under 60 Rockwell without being aggressive, so it can be used many times a day.Fine cut is the sensible default for most Western knives. It keeps a good edge on standard stainless and carbon steel blades, while a regular cut adds more texture for heavier wear and a polishing steel suits the softest stamped knives.
Round or Oval?The F. Dick 10-inch Fine Cut Oval Steel has the same fine cut on an oval rod, which puts more of the rod against the blade on each stroke and will not roll off a counter. For soft stamped butcher knives, the F. Dick 10-inch Non-Chromium Polishing Steel is the better match. Our Honing Rod Guide explains the difference between cuts. Learn More$33.15 -
F. Dick 1905 10-inch Round Regular Cut Steel
Matching the classic look of the 1905 knife series, this 10-inch round steel keeps those knives honed with a regular cut. It suits a home cook who wants the steel in the block to match the knives beside it.The regular cut realigns an edge that has rolled with use, so the knife keeps cutting cleanly and needs abrasive sharpening less frequently. Ten inches covers 1905 knives up to the 8-inch chef’s knife, with room for a full stroke. The handle and rod join without a gap, which keeps the steel easy to clean.Hang it by the stove, or keep it in the block beside the knives it serves.Pair it with the 1905 8-inch chef’s knife or the 1905 6-piece magnetic knife block set. For longer blades, a 12-inch rod such as the EuroCut 12-inch Round Regular Cut Steel adds reach, and a wood-handled steel is the F. Dick Honorary steel. Learn More$118.30 -
F. Dick 10-inch Round Regular Cut Steel
A 10-inch round steel is the right size for a home knife block, and this regular cut F. Dick rod keeps the edge on chef’s knives, slicers and paring knives aligned between sharpenings. It suits kitchens with mostly German and American knives.The regular cut has pronounced grooves, so a few strokes straighten a rolled edge and restore some bite to a knife that has started to slip on tomato skins. The round profile touches the edge at a single point, which gives precise control along a curved blade. Ten inches covers knives up to an 8-inch chef’s knife with room to spare.For a longer blade, the F. Dick 12-inch round butcher steel adds reach. An oval rod with a wider face is the F. Dick 12-inch oval regular cut steel. To finish with a smoother edge, step up to a fine cut such as the EuroCut 12-inch round fine cut steel. Learn More$35.75 -
F. Dick Dickoron Classic 12-inch Round Sapphire Cut Steel
The sapphire cut is used only in the Dickoron family, and this 12-inch round Dickoron Classic brings it to butchers, fishmongers and meat processors who want sharper knives and better yields. F. Dick describes the result as velvety-soft honing.The sapphire cut has straight, very fine striations running from handle to tip. It produces a uniformly sharp, fine edge that can be kept sharp for a long time before the knife needs regrinding. The round profile gives precise control along curved boning and breaking knives, and the substantial handle balances the rod well.It also fits a full-size knife roll.An oval version is the Dickoron Classic 12-inch oval steel, and the 14-inch round suits long scimitars. For a still finer cut, serious professionals choose the Dickoron Micro 12-inch Oval Super Fine Cut Steel. A lighter round steel at the same length is the EuroCut 12-inch Round Regular Cut Steel. Learn More$104.00 -
F. Dick Dickoron Classic 14-inch Round Sapphire Cut Steel
Butchers, meat processors and cooks who carve shawarma and gyro with long slicers need a long rod, and this 14-inch Dickoron Classic adds the sapphire cut to that length. It is also well suited to curved scimitars and breaking knives.The extra length lets a 12-inch blade sweep its whole edge in one stroke, so the angle stays consistent from heel to tip. The fine, straight sapphire striations give velvety-soft honing and leave a uniform, fine edge. F. Dick cuts the lines with modern production methods so they run even and at the correct depth.Hang it at the station between cuts.For knives up to 10 inches, the Dickoron Classic 12-inch round steel is easier to carry. A regular cut at this length is the F. Dick 14-inch round butcher steel. A scabbard such as the F. Dick Knife Scabbard with Belt carries the steel with the knives. Learn More$109.20 -
F. Dick 10-inch Round Regular Cut Butcher Steel
This 10-inch round steel sits in the middle of F. Dick’s range, with a metal finger guard and a hang ring that the entry-level steels lack. The regular cut keeps butcher, boning and kitchen knives aligned through a day of use.The finger guard protects the hand if the edge slips and adds weight at the handle, which makes the rod feel balanced in the hand. Ten inches suits boning and utility knives as well as chef’s knives up to 8 inches. A longer rod is easier for curved blades such as a scimitar or a breaking knife, which need room to sweep the full edge.For a home cook, the 10-inch length also slips into a standard knife block, and the ring lets it hang beside the stove.For longer knives, the 12-inch and 14-inch versions of this butcher steel add reach. A step up in hardness and finish is the Dickoron Classic 12-inch round sapphire cut steel. Learn More$48.75 -
F. Dick 12-inch Round Regular Cut Butcher Steel
Twelve inches is the length that lets most knives pass the rod from heel to tip in one stroke, and this round F. Dick butcher steel is a standard choice for that work. It suits butchers, line cooks and home cooks with a mix of knife lengths.A metal finger guard protects the hand and balances the rod, and the hang ring keeps it handy on a hook by the cutting table. F. Dick tapers the rod and cuts the grooves evenly, so a consistent angle is easy to repeat. The regular cut puts a working edge back on knives used for meat and vegetables.It is a sensible first steel for a cook who owns knives of several lengths.A shorter version is the 10-inch round butcher steel, and the 14-inch suits long scimitars. For an oval face, see the 12-inch oval butcher steel. The EuroCut 12-inch Round Regular Cut Steel is the same length without the metal finger guard. Learn More$50.70 -
F. Dick 14-inch Round Regular Cut Butcher Steel
Long knives need a long rod, and this 14-inch F. Dick butcher steel gives scimitars, breaking knives and doner slicers enough length to sweep the full edge. It is built for butchers and processors who work with blades over 10 inches.A metal finger guard adds weight to the handle end, which balances the long rod and protects the hand. The regular cut straightens edges dulled by bone and joints and leaves enough bite for clean trimming. The extra length makes it harder to fit in a knife roll, so it is best kept on a hook or in a scabbard at the cutting station.For knives under 10 inches, the 12-inch round butcher steel is easier to carry. The same length with a sapphire cut is the Dickoron Classic 14-inch round steel, and a non-slip handle version is the F. Dick 14-inch round steel with non-slip handle. Learn More$55.25 -
F. Dick 2.75-inch Pocket Steel
Anglers, hunters and campers can carry this F. Dick pocket steel for quick touch-ups away from the kitchen. The regular cut rod brings back the edge on a pocket knife or a fillet knife wherever it is needed.To store it, unscrew the rod and screw it back in reversed, inside the handle, which protects the cut and keeps it from snagging in a pocket or tackle box. The rod resists corrosion, so it can sit in a bag between trips without rusting. It is small enough to keep in a glove box as well.Before a trip, check that the rod is screwed in firmly so it cannot work loose in a pack.For a field kit with room for a longer rod, the F. Dick 8-inch coarse cut steel gives more length. At home, the F. Dick 10-inch round regular cut steel fits a knife block. A fishing knife to carry with it is the ErgoGrip 4-inch fishing knife. Learn More$15.60 -
F. Dick Red Spirit 10-inch Round Regular Cut Steel
With its red handle, this 10-inch round steel completes the Red Spirit knife series and keeps those knives honed with a standard cut. Knives need regular attention on a steel to stay truly sharp, and this rod makes that part of the routine.The round shape is symmetrical in the hand and guides the knife in a smooth, even stroke. The handle holds firm in a wet hand. Ten inches is long enough for the Red Spirit chef’s knife and the AJAX, and it suits the series’ paring and boning knives too.Keep it by the board so a few strokes before each task become a habit, and the Red Spirit edge will stay keen between sharpenings.Pair it with the Red Spirit 8.5-inch chef’s knife or the Red Spirit Pit Master BBQ set. For the 10-inch Hektor scimitar, a longer rod such as the F. Dick 12-inch round steel with non-slip handle gives more room. Learn More$70.85
