You have no items in your shopping cart.
Best Sellers
-
F. Dick EuroCut 12-inch Round Fine Cut Steel
The EuroCut fine cut has lighter lines than the regular cut, so it leaves a smoother, less roughened edge. That edge slices fish and beef cleanly without tearing, which makes this 12-inch round steel a good choice for portioning and carving.Fine cut steels remove less metal and mainly straighten a rolled edge, so they suit knives that are honed regularly and kept sharp. The round profile gives precise contact along curved blades such as boning knives and scimitars. Twelve inches lets a long slicer pass the rod in one stroke.It is a good second steel beside a regular cut.For more bite on vegetables, the round regular cut sibling is the EuroCut 12-inch Round Regular Cut Steel, our best-selling steel overall. An oval version of this rod is the EuroCut 12-inch oval fine cut steel. For a finer finish still, serious professionals choose the Dickoron Micro 12-inch Oval Super Fine Cut Steel. Learn More$27.95 -
Dexter-Russell 10-inch No Work Smooth Steel
“No work” is Dexter-Russell’s promise that this smooth steel never needs working with emery cloth to keep its surface effective. The 10-inch NWSS-10 realigns an edge without removing metal, and Dexter pitched the No Work line to production managers as an edge maintenance tool that is easy to teach to new hires. Shoppers search for it as a smooth no work sharpening steel.A smooth steel is the gentlest kind, a good match for cooks and meat cutters who hone often and want to keep a keen edge longer between sharpenings.
Smooth or Diamond?When the edge needs metal removed, a diamond steel such as the Sani-Safe 12-inch Diamond Sharpening Steel does more work. Learn More$28.45 -
Victorinox 14-inch Fine Cut Honing Steel, Dark Wood Handle
This 14-inch Victorinox fine cut steel is a classic-looking piece with a dark wood handle and a hanging tab. It is a great steel for a workplace where several people share one, and its fine texture works on both Japanese and German knives.The extra length is particularly helpful with long, curved knives such as a scimitar. On a Hardwood 12-inch Scimitar, the whole curve travels along the rod in one stroke, so the edge is honed evenly from heel to tip.Hang it by its tab at the cutting station, and hone with light, alternating strokes before each round of cutting.Wipe the rod clean between users, and hang it where everyone at the station can reach it.For a regular cut at this length, see the Victorinox 14-inch Regular Cut Honing Steel. The Victorinox 12-inch Fine Cut Honing Steel is a shorter fine cut. Our Honing Rod Guide explains honing harder Japanese steels. Learn More$46.30 -
Victorinox 10-inch Combination Cut Honing Steel
The Victorinox 10-inch combination steel has two sides grooved as a fine cut and two smooth sides for use as a polishing rod. Polishing rods are used by butchers who want to keep a razor edge.We recommend a couple of strokes on the fine side, top and bottom of the blade, then rotating the steel 90 degrees and finishing on the polishing side for a smooth, mirror-finish edge.It is made in Sheffield, England, with a plastic handle and a ring for hanging, and the 10-inch steel fits nicely into a standard knife block. It suits knives up to 8 inches, such as the Fibrox Pro 8-inch Butcher and Fishing Knife.Wipe the rod clean after use. The polishing faces stay smooth only if they are kept free of grit, so store the steel where it will not knock against other tools.For more length, see the Victorinox 12-inch Combination Steel. Our Honing Rod Guide explains polishing steels. Learn More$32.40 -
Victorinox 12-inch Combination Cut Honing Steel
The Victorinox 12-inch combination steel has two sides grooved as a fine cut and two smooth sides for use as a polishing rod. Polishing rods are used by butchers who want to keep a razor edge.We recommend a couple of strokes on the fine side, top and bottom of the blade, then rotating the steel 90 degrees and finishing on the polishing side for a smooth, mirror-finish edge.The 12-inch rod covers knives up to 10 inches, such as the Fibrox Pro 10-inch Butcher Knife, so the whole edge meets the steel on every stroke. It is made in Sheffield, England, with a plastic handle and a ring for hanging.Wipe the rod after use and hang it by its ring.For a shorter rod, see the Victorinox 10-inch Combination Steel. For a polishing surface alone, the Victorinox 10-inch Round Polish Steel. Our Honing Rod Guide explains each cut. Learn More$33.20 -
Master Grade 11 in. White Ceramic Rod
The Master Grade ST-3700 receives our top recommendation for a ceramic honing rod.
Please note that a steel honing rod is used to straighten the edge of a knife that has "burred" or rolled over. Ceramic rods are used to remove metal and restore an edge. Knives with a Rockwell hardness of 61 or greater tend to not roll the edges, but will abrade and dull. Ceramic may be the best choice for these knives.
Not all ceramics are equal: At 9 mohs of hardness, the Master Grade ST-3700 is significantly better than others. (Diamonds are 10 mohs). The vast majority of ceramic rods on the market are 8 mohs.
Impact Resistant. Handle is square, so it is less likely to roll off the table. Rubber tip and metal core also help to make this rod more likely to survive a fall. The level of abrasiveness on a ceramic rod is anecdotal as they are textured ceramics that lack a grit that has been sieved to a particular grain size. These are roughly equivalent to a 2000 grit stone. Learn More$49.95 -
Idahone 10-inch Fine Ceramic Sharpening Rod, Black Wood Handle
The Idahone 10-inch Fine Ceramic Sharpening Rod is for cooks who want to keep a sharp knife sharp with a few strokes before each use. A honing steel only pushes a rolled edge back into line. This high-alumina ceramic rod removes a small amount of steel, so it sharpens and polishes the edge at the same time. Its finish is comparable to a fine Japanese whetstone, which makes it a maintenance tool between full sharpenings rather than a substitute for them.
What It Does for Your Knives Fine ceramic abrasive: Refreshes a working edge in a few light strokes and leaves a smooth, polished finish. Suited to harder steels: Because the rod abrades the edge rather than bending it, it suits the harder steels of many Japanese knives, which tend to wear or chip rather than roll. Fewer whetstone sessions: Regular use keeps an edge in service longer, so full sharpenings are needed less often. Compact length: Handles paring knives, utility knives and shorter chef’s knives. For longer blades, the Idahone 12-inch Fine Ceramic Sharpening Rod, Black Wood Handle allows a full stroke from heel to tip.
Choosing a Fine or Coarse Rod The fine rod is the right tool for routine maintenance of a knife that is still sharp. When a knife no longer responds to it, the Idahone 10-inch Coarse Ceramic Sharpening Rod removes steel faster to restore the edge, and the fine rod then refines it. The same fine rod is also available with a natural maple handle as the Idahone 10-inch Fine Ceramic Sharpening Rod, Hard Rock Maple Handle. Learn More$36.45 -
Idahone 12-inch Fine Ceramic Sharpening Rod, Black Wood Handle
The Idahone 12-inch Fine Ceramic Sharpening Rod is for cooks who rely on long knives and want to keep them sharp between full sharpenings. A honing steel only pushes a rolled edge back into line. This high-alumina ceramic rod removes a small amount of steel with each stroke, so it sharpens and polishes the edge at the same time. Its finish is comparable to a fine Japanese whetstone, which makes it a maintenance tool between full sharpenings rather than a substitute for them.
What It Does for Your Knives Long working surface: Gives 10-inch chef’s knives, slicers and sujihiki room for a full stroke from heel to tip, so the entire edge receives even contact. Fine ceramic abrasive: Refreshes a working edge in a few light strokes and leaves a smooth, polished finish. Suited to harder steels: Because the rod abrades the edge rather than bending it, it suits the harder steels of many Japanese knives, which tend to wear or chip rather than roll. Fewer whetstone sessions: Regular use keeps an edge in service longer, so full sharpenings are needed less often.
Other Sizes and Grits For shorter knives or a smaller kitchen, the Idahone 10-inch Fine Ceramic Sharpening Rod, Black Wood Handle offers the same ceramic in a more compact length. The same fine rod is also available with a natural maple handle as the Idahone 12-inch Fine Ceramic Sharpening Rod, Hard Rock Maple Handle. When a knife no longer responds to the fine rod, the Idahone 12-inch Coarse Ceramic Sharpening Rod removes steel faster to restore the edge. Learn More$38.25 -
F. Dick 12-inch Round Regular Cut Steel with Non-Slip Handle
Everyday honing on a 12-inch rod lets most knives pass evenly from heel to tip, even long ones, and this round F. Dick steel adds a non-slip handle for a secure grip. It is a dependable steel for butchers, processors and line cooks.The grooves are cut deep and even so they keep working with age, and the handle is sealed to the rod for cleaning in demanding environments. A regular cut restores bite to knives that have started to slide on meat or vegetables. The round profile gives precise control along the curve of a boning or breaking knife.Hang it at the station between uses.A shorter rod is the 10-inch round steel with non-slip handle, and the 14-inch handles scimitars. With a black handle and metal finger guard, the F. Dick 12-inch round butcher steel is a comparable rod. For a smoother edge, step up to the FineCut 12-inch round steel. Learn More$42.25 -
Idahone 12-inch Coarse Ceramic Sharpening Rod, Hard Rock Maple Handle
The Idahone 12-inch Coarse Ceramic Sharpening Rod is for cooks whose knives have dulled past the point a fine rod or honing steel can recover, but who would rather not set up a whetstone each time an edge fades. Its coarse high-alumina ceramic removes steel faster than Idahone’s fine rods and restores a working edge in a few strokes. The long rod gives a chef’s knife or slicer room to travel its full length without running off the end.
What It Does for Your Knives Coarse ceramic abrasive: Cuts a fresh edge on knives dulled by regular use. A honing steel only straightens a rolled edge. Measured metal removal: The grit is somewhat finer than the coarse rods in Idahone’s V-type sharpeners, so the rod reworks an edge without the heavy stock removal of a sharpening system’s first stage. Long working surface: Accommodates 10-inch chef’s knives and slicers, so each stroke covers the edge from heel to tip. Wood handle with hanging ring: Provides a secure grip for steady strokes and keeps the rod within reach at the prep station.
Using the Coarse and Fine Rods Together The coarse rod does the corrective work, and a fine rod refines the result. Cooks who keep both on hand use the coarse rod when a knife no longer responds to honing, then finish on the Idahone 12-inch Fine Ceramic Sharpening Rod for a smoother, more refined edge. For routine maintenance of a knife that is still sharp, the fine rod alone is the better choice because it removes less steel. Learn More$38.25
