Yanagi / Sujihiki

One of the traditional Japanese shapes, Yanagi knives are similar to carvers in appearance but can be distinguished by their long thick spines, prominent shinogi lines, and concave back sides. The westernized version of this form is known as Sujihiki. Flat ground and never more than 3mm in width, Sujihiki knives have long, thin, pointed blades that are very comparable to carving knives in both appearance and application.

Sujihikis (also known as Sujibikis) are commonly made in both carbon and stainless steels. Yanagis (also known as Yanagibas) are more commonly made in Carbon Steel. We do have a selection of Stainless Steel Yanagis as well. You can browse our selection of Stainless Steel Yanagis here.

5 Item(s)

per page

  • Kikuichi GW Series Ginsan Sanmai 10.6-inch (270mm) Sujihiki

    A 10.6-inch (270mm) sujihiki is a professional slicer, long enough for a side of salmon or a large holiday roast, and Kikuichi’s GW Series version is one of the Kikuichi slicers shoppers visit most on our site. Its three-layer blade wraps a Ginsan (Silver-3) stainless core in SUS440 cladding.Kikuichi leaves the GW blades free of decorative finishes so the steel and geometry carry the knife. The long, narrow profile slices with a single draw and leaves a clean face on fish and meat, and its octagonal walnut grip keeps the weight down on a knife this long. Professional sushi and carving cooks reach for this length, and it serves home cooks who regularly slice large cuts or cure and slice their own gravlax.
    Choosing a Ginsan SlicerFor a shorter slicer, choose the GW Series 9.4-inch (240mm) Sujihiki. The Kikuichi 270mm Sujihiki Magnet Saya protects the long edge. Learn More

    Regular Price: $375.00

    Special Price $340.00

  • Kikuichi GW Series Ginsan Sanmai 9.4-inch (240mm) Sujihiki

    The GW Series is Kikuichi’s plainest Ginsan line, a three-layer (sanmai) blade with a Silver-3 stainless core that Kikuichi deliberately leaves without a hammered or damascus finish. On this 9.4-inch (240mm) sujihiki, that simplicity puts the attention on the cut.Those qualities, which Kikuichi sums up as thin, strong and precise, are clearest in a narrow slicer working through raw fish and rare beef. A walnut wa handle keeps the knife light, and the 240mm length handles a typical roast or fish loin in a single pull. Hone it gently before each use, and wipe the blade between cuts of fish. It suits sushi cooks and home cooks who slice sashimi and want a stainless edge that is easy to maintain.
    240mm or 270mm?The GW Series 10.6-inch (270mm) Sujihiki adds length for larger work. For a matching gyuto in Ginsan steel, see the GN Series 9.4-inch (240mm) Gyuto. Learn More

    Regular Price: $355.00

    Special Price $335.00

  • Minonokuni Gin-San 10.6-inch (270mm) Yanagi

    The longest Gin-San yanagi is meant for cooks who slice wide blocks of fish for a dining room and want a blade that will not rust between orders. At 270mm, it finishes a slice of salmon or tuna in one long stroke, with length to spare on broader fish.The knife is hand-forged by Minonokuni craftsmen in the kasumi method, with the hard Gin-san edge steel jacketed in a softer stainless steel. That softer jacket is what makes it practical to hammer such a hard steel into a traditional single-bevel blade, and it also makes the knife easier to sharpen than a solid hard blade.
    Where It FitsGin-san is a specialty line, technically more premium than Matsu, Take or Ume, but not the right choice for everyone. A long blade asks for a steady hand and room on the board. A cook who wants this length in carbon steel can compare the Take 270mm yanagiba or the Matsu 270mm yanagiba.Shorter Gin-San yanagi are the 210mm and 240mm. For more on the yanagi, see our kitchen knife shapes guide. Learn More
  • Minonokuni Gin-San 9.4-inch (240mm) Yanagi

    The 240mm Gin-San yanagi brings the standard sushi counter length to a stainless steel that a cook can maintain like carbon steel. It slices a full saku of tuna or a salmon fillet in a single draw and shrugs off the constant moisture of fish work.Gin-san is a stainless steel that can be hammer-forged in the traditional way and ground to a single bevel. That combination is unusual. Most stainless steels are hard to forge and sharpen this way, which is why most traditional yanagi are carbon steel. Here, the cook gets a keen, easily sharpened edge without needing to dry the blade after every slice.
    Specialty, Not DefaultWe place Gin-san among our specialty lines. It is more premium than the standard lines, but a cook who already maintains carbon knives without trouble may prefer the Take 240mm yanagiba in white steel. Gin-san is the better match for a kitchen where knives may stay wet, or for a cook who would rather spend less time on care.For a shorter knife, see the Gin-San 210mm yanagi; for more reach, the Gin-San 270mm yanagi. The guide to knife shapes covers the yanagi. Learn More
  • Minonokuni Gin-San 8.3-inch (210mm) Yanagi

    A stainless yanagi that sharpens like a carbon one is the reason to choose this knife. The Gin-San 210mm slices sashimi with the long pull stroke of a traditional single-bevel blade, and it tolerates the wet conditions of a sushi station far better than carbon steel.The 210mm length suits a home board or a compact station. Start each slice at the heel and draw the blade toward you in one motion, so the fish is cut rather than pressed. The hollow back keeps the slice from sticking, and the result has the bright, smooth surface that sashimi calls for.
    Choosing Gin-sanGin-san is one of our two specialty lines. It is technically more premium than Matsu, Take or Ume, though not necessarily the best fit for every cook. It suits a cook who values low maintenance, or who slices fish in a humid kitchen. For learning on a forgiving steel, the Ume 210mm yanagiba is the better start; for the keenest carbon edge, the Matsu 210mm yanagiba.Longer Gin-San yanagi are the 240mm and 270mm. The knife shapes guide explains how the yanagi compares with other slicers. Learn More

5 Item(s)

per page