You have no items in your shopping cart.
Yanagi / Sujihiki
One of the traditional Japanese shapes, Yanagi knives are similar to carvers in appearance but can be distinguished by their long thick spines, prominent shinogi lines, and concave back sides. The westernized version of this form is known as Sujihiki. Flat ground and never more than 3mm in width, Sujihiki knives have long, thin, pointed blades that are very comparable to carving knives in both appearance and application.
Sujihikis (also known as Sujibikis) are commonly made in both carbon and stainless steels. Yanagis (also known as Yanagibas) are more commonly made in Carbon Steel. We do have a selection of Stainless Steel Yanagis as well. You can browse our selection of Stainless Steel Yanagis here.
-
I.O. Shen 10.7 in. (270mm) Left Hand Yanagi
The I.O. Shen 10.7 in. (270mm) Left Hand Yanagi is made of I.O. Shen Triplex Steel Technology so it tests on the Rockwell scale at 62 giving this knife good edge retention. This stainless Yanagi is made like a traditional carbon Yanagi so it features a Shinogi line. The Shinogi line is the flat face at the same angle as the edge. Use this Shinogi line to allow the knife to lay flat on a sharpening stone making this a much easier knife to hand sharpen. Made in Taiwan. Learn More$276.95 -
MAC Japanese Series 8.25-inch Yanagi
A shorter yanagi fits a home cutting board and still slices sashimi with a single pull. The FKW-7 is MAC’s 8.25-inch stainless yanagi, a manageable first single-bevel knife for home sushi makers and a compact slicer for a crowded station.It cuts raw fish, cured salmon and thin slices of rare beef, and the short blade is easy to control for portioning nigiri slices from a small block. A longer yanagi gives a longer stroke on wide fillets; for those, see the 10.25-inch FKW-9.A fitted wooden sheath is sold separately. Our guide to knife shapes explains the yanagi shape. Learn More$139.95 -
MAC Japanese Series 11.5-inch Yanagi
The FKW-10 is the longest MAC yanagi, an 11.5-inch improved version of the traditional Japanese sashimi knife. The extra length lets a sushi chef draw through a wide block of tuna or a large salmon fillet in one stroke, which gives the smooth cut face sashimi calls for.The stainless steel blade is easier to care for than most traditional carbon steel yanagis, so you can work quickly without worrying about whether your knife will rust. It is sharpened on one side, for right-handed use.A fitted wooden sheath is sold separately. For a shorter board or a home kitchen, the 10.25-inch FKW-9 is easier to manage. Our Kitchen Knife Shapes guide explains the yanagi and sujihiki. Learn More$214.95 -
Minonokuni Gin-San 10.6-inch (270mm) Yanagi
The longest Gin-San yanagi is meant for cooks who slice wide blocks of fish for a dining room and want a blade that will not rust between orders. At 270mm, it finishes a slice of salmon or tuna in one long stroke, with length to spare on broader fish.The knife is hand-forged by Minonokuni craftsmen in the kasumi method, with the hard Gin-san edge steel jacketed in a softer stainless steel. That softer jacket is what makes it practical to hammer such a hard steel into a traditional single-bevel blade, and it also makes the knife easier to sharpen than a solid hard blade.
Where It FitsGin-san is a specialty line, technically more premium than Matsu, Take or Ume, but not the right choice for everyone. A long blade asks for a steady hand and room on the board. A cook who wants this length in carbon steel can compare the Take 270mm yanagiba or the Matsu 270mm yanagiba.Shorter Gin-San yanagi are the 210mm and 240mm. For more on the yanagi, see our kitchen knife shapes guide. Learn More -
Minonokuni Gin-San 9.4-inch (240mm) Yanagi
The 240mm Gin-San yanagi brings the standard sushi counter length to a stainless steel that a cook can maintain like carbon steel. It slices a full saku of tuna or a salmon fillet in a single draw and shrugs off the constant moisture of fish work.Gin-san is a stainless steel that can be hammer-forged in the traditional way and ground to a single bevel. That combination is unusual. Most stainless steels are hard to forge and sharpen this way, which is why most traditional yanagi are carbon steel. Here, the cook gets a keen, easily sharpened edge without needing to dry the blade after every slice.
Specialty, Not DefaultWe place Gin-san among our specialty lines. It is more premium than the standard lines, but a cook who already maintains carbon knives without trouble may prefer the Take 240mm yanagiba in white steel. Gin-san is the better match for a kitchen where knives may stay wet, or for a cook who would rather spend less time on care.For a shorter knife, see the Gin-San 210mm yanagi; for more reach, the Gin-San 270mm yanagi. The guide to knife shapes covers the yanagi. Learn More -
Minonokuni Gin-San 8.3-inch (210mm) Yanagi
A stainless yanagi that sharpens like a carbon one is the reason to choose this knife. The Gin-San 210mm slices sashimi with the long pull stroke of a traditional single-bevel blade, and it tolerates the wet conditions of a sushi station far better than carbon steel.The 210mm length suits a home board or a compact station. Start each slice at the heel and draw the blade toward you in one motion, so the fish is cut rather than pressed. The hollow back keeps the slice from sticking, and the result has the bright, smooth surface that sashimi calls for.
Choosing Gin-sanGin-san is one of our two specialty lines. It is technically more premium than Matsu, Take or Ume, though not necessarily the best fit for every cook. It suits a cook who values low maintenance, or who slices fish in a humid kitchen. For learning on a forgiving steel, the Ume 210mm yanagiba is the better start; for the keenest carbon edge, the Matsu 210mm yanagiba.Longer Gin-San yanagi are the 240mm and 270mm. The knife shapes guide explains how the yanagi compares with other slicers. Learn More -
I.O. Shen 270mm Yanagiba
The I.O. Shen 10.7 in. (270mm) Yanagi is made of I.O. Shen Triplex Steel Technology so it tests on the Rockwell scale at 62 giving this knife good edge retention. This stainless Yanagi is made like a traditional carbon Yanagi so it features a Shinogi line. The Shinogi line is the flat face at the same angle as the edge. Use this Shinogi line to allow the knife to lay flat on a sharpening stone making this a much easier knife to hand sharpen. Learn More$264.95 -
MAC Japanese Series 10.25-inch Yanagiba
Sashimi is cut with a single long pull, and the yanagiba is built for that cut: a long, narrow blade sharpened on only one side. The MAC FKW-9 is a 10.25-inch right-handed yanagiba in stainless steel, so a sushi cook gets the traditional shape without the rust care a carbon steel blade needs.Besides raw fish, it slices prosciutto, carpaccio, ham, roast beef and chicken thinly, and its edge cuts tomatoes and garnishes cleanly. The single bevel lets the blade separate a slice from the block with less tearing than a double-bevel knife, which leaves a glossy cut face on tuna and salmon.A fitted wooden sheath (saya) is sold separately. Left-handed cooks should choose the FKW-9L. For a shorter or longer blade, see the 8.25-inch FKW-7 or the 11.5-inch FKW-10. Our Kitchen Knife Shapes guide explains the yanagi. Learn More -
MAC Japanese Series 10.25-inch Left-Handed Yanagiba
A single-bevel knife only cuts properly in the hand it was ground for, so left-handed sushi cooks need a mirror-image blade. The FKW-9L is MAC’s 10.25-inch yanagiba ground for the left hand, in stainless steel.The MAC Japanese Series left-handed yanagi is an excellent choice and is very well priced. It is used for slicing and filleting fish, and for prosciutto, carpaccio, ham, roast beef, chicken, tomatoes and garnishes. The bevel sits on the left face, so the flat back faces the fish block when held in the left hand and each slice separates cleanly from the block.A matching left-handed wooden sheath is sold separately; the right-handed sheath does not fit this blade. Right-handed cooks should choose the FKW-9. Our guide to kitchen knife shapes describes the yanagi shape. Learn More$214.95 -
Global Classic 10-inch Yanagi Sashimi Knife
For sashimi and sushi at home, the G-11R is the traditional Japanese tool in a form that is easy to keep. Its 25 cm yanagi blade is ground on one side only, the way Japanese sashimi knives have long been made, and the back of the blade is slightly hollow so each slice of fish separates and falls away.A yanagi is used with a single long pull from heel to tip. The length lets that one stroke cut through a block of tuna or a salmon fillet, leaving a glossy face on the slice that a sawing motion would tear. The single bevel also steers the blade slightly away from the cut side, which helps slices peel off cleanly. Traditional yanagi are usually carbon steel and need oiling after each use; this one needs only washing and drying.The single-bevel edge is made for the right hand and must be sharpened on whetstones. Cooks new to Japanese sharpening should weigh that before buying.
Which Global Slicer?The Global Classic 12-inch Yanagi Sashimi Knife is the longer version for large loins and sushi counters. The Global Classic 10-inch Sujihiki is ground on both sides, works in either hand and sharpens like a Western knife. See our kitchen knife shapes guide for more on yanagi and sujihiki. Learn MoreRegular Price: $184.95
Special Price $147.96
