Yanagi / Sujihiki

One of the traditional Japanese shapes, Yanagi knives are similar to carvers in appearance but can be distinguished by their long thick spines, prominent shinogi lines, and concave back sides. The westernized version of this form is known as Sujihiki. Flat ground and never more than 3mm in width, Sujihiki knives have long, thin, pointed blades that are very comparable to carving knives in both appearance and application.

Sujihikis (also known as Sujibikis) are commonly made in both carbon and stainless steels. Yanagis (also known as Yanagibas) are more commonly made in Carbon Steel. We do have a selection of Stainless Steel Yanagis as well. You can browse our selection of Stainless Steel Yanagis here.

Items 21 to 30 of 49 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Miyabi Black 5000MCD67 9.5-inch Sujihiki

    The sujihiki is the Japanese slicer: a long, narrow blade for cutting raw fish, roasts and cured meats in one draw. In Miyabi Black, it gets the line’s 66 HRC MC66 core, and slicing proteins is exactly where our testing found that steel performs best.The narrow 9.5-inch blade leaves a clean, glossy face on tuna and salmon and keeps slices of brisket intact. Draw it toward you in one stroke.For a less costly sujihiki, see the Miyabi Evolution sujihiki. Our Kitchen Knife Shapes guide explains the sujihiki. Learn More
  • Glestain Ice Handle 9.4-inch (240mm) Sujihiki

    The Ice Handle 240mm sujihiki is a slicer for kitchens that handle raw fish and meat and sanitize knives between tasks. Its all-stainless handle has no wood to absorb moisture and no seam at the blade, which suits sushi counters and protein stations.The handle is dimpled and textured, so it grips firmly when hands are wet. The blade is the 240mm Glestain slicer, with dimples that keep thin slices of fish from sticking and an asymmetrical grind that pushes each slice cleanly off the steel.Use it to portion fish, slice rare beef or carve a ham. The 240mm length covers most cuts in a single stroke.
    Other Ice Handle and 240mm SlicersThe Ice Handle line also includes the 270mm and 300mm Sujihiki. For a wood handle, see the KE Series 240mm Sujihiki, or the smooth-faced W Series 240mm Sujihiki for sashimi. Our guide to kitchen knife shapes covers the sujihiki. Learn More
  • Glestain W Series 9.4-inch (240mm) Sujihiki

    The W Series sujihiki is the Glestain slicer without dimples. Its 240mm blade has a smooth face on both sides, and we recommend it for sashimi-grade fish and for cooks who want a traditional slicer.A smooth face gives the cleanest possible surface on a slice of raw fish, and a plain blade is simple to polish and keep looking new. The blade keeps Glestain’s asymmetrical geometry, which still pushes each slice away from the knife as it cuts.For roasts, hams and cooked meats that tend to stick, the dimpled sujihiki do more to help; for raw fish and presentation slicing, this is the one to choose.
    Dimpled or Smooth?Compare this knife with the dimpled KE Series 240mm Sujihiki and the all-metal Ice Handle 240mm Sujihiki. The W Series also includes the 100mm Paring Knife and the 210mm Flexible Fillet Knife. See our kitchen knife shapes guide for the differences between sujihiki and yanagi. Learn More
  • Suncraft Senzo Black 8.3-inch (210mm) Sashimi Knife

    Suncraft names this 8.3-inch Senzo Black knife a sashimi knife, a long, narrow slicer for cutting raw fish in a single drawing stroke. One pull through a block of tuna or salmon leaves a smooth, glossy face that sawing would tear.The same blade slices a roast or a duck breast into thin, even portions, so it works beyond the sushi board. A VG10 core holds the fine edge that clean slicing requires, and each knife is handcrafted in Seki, Japan, a city with an 800-year legacy of blade making. With its black Damascus pattern and octagonal handle, it is a dramatic knife for home sushi makers and a standout gift.
    Everyday PartnerThe 7.9-inch Chef’s Knife handles daily prep. Learn More
  • Minonokuni Matsu 8.3-inch (210mm) Left-Handed Yanagiba

    Left-handed sushi cooks cannot simply use a right-handed yanagiba. The single bevel and hollow back are reversed on this knife, so the edge steers the slice away from the fish when it is held in the left hand. A right-handed blade used left-handed pulls into the fish and leaves a ragged, wedge-shaped slice.This Matsu 210mm is a true mirror of the right-handed Matsu 210mm yanagiba, forged in the same blue steel. We stock it rather than make it to order, so it ships like any other knife in the line.
    Is the Matsu the Right Line?Blue steel takes a very fine edge and keeps it longer than the white steel in the Take line. The trade-off is a harder, more brittle edge that is less forgiving of careless sharpening or a twist in the cut. If this is a first single-bevel knife, consider the Take 210mm left-handed yanagi or the Ume 210mm left-handed yanagi, which are easier to learn on and to sharpen.At 210mm, the blade suits a home cutting board and slices fillets of salmon, tuna and yellowtail in one long pull. The Matsu 240mm left-handed yanagiba gives a longer stroke for larger blocks. Read more about the yanagiba in our guide to knife shapes. Learn More
  • Minonokuni Matsu 9.4-inch (240mm) Left-Handed Yanagiba

    For a left-handed sushi chef, 240mm is the working length, and a mirror-ground blade is the only way to get the straight, smooth slice the yanagiba is made for. The bevel sits on the left face of this knife and the hollow back on the right, the reverse of the right-handed Matsu 240mm yanagiba.This is the longest left-handed Matsu we carry. The length lets a slice of tuna, salmon or hamachi start at the heel and finish at the tip in one draw, with no back-and-forth. The knife is in stock at Knife Merchant; we do not special-order left-handed Matsu knives in other sizes.
    Blue Steel for Experienced HandsBlue steel is hard and holds an edge a long time, but the thin single-bevel edge chips if the blade is twisted or knocked against bone. It is best for a cook already comfortable sharpening chisel-ground knives on waterstones. The Take 240mm left-handed yanagi in white steel is less brittle and a better choice for a cook new to the style.For a shorter knife on a home board, see the Matsu 210mm left-handed yanagiba. The kitchen knife shapes guide explains the yanagiba and its relatives. Learn More
  • Minonokuni Sakura Damascus 8.3-inch (210mm) Yanagi

    At 210mm, the Sakura Damascus yanagi is agile enough for home use and for chefs working with smaller blocks of fish. It is a purpose-built slicer for sushi and sashimi, with a Damascus jacket that gives each knife its own pattern.The single-bevel urasuki grind is the working part of the design. The hollow on the flat back reduces drag as the blade passes through the fish and helps each slice separate cleanly. Draw the knife from heel to tip in one long stroke, and the slice comes away with a bright, smooth face.
    Sakura or a Standard Line?Sakura is a specialty line, technically more premium than Matsu, Take or Ume but not necessarily the right knife for every cook. The core is blue steel, which holds an edge longest and is also the most delicate. For a first yanagi, the Take 210mm yanagiba is less brittle; for the same steel without the Damascus finish, the Matsu 210mm yanagiba is the alternative.Longer Sakura yanagi are the 240mm and 270mm. The kitchen knife shapes guide explains the yanagi. Learn More
  • Minonokuni Sakura Damascus 9.4-inch (240mm) Yanagi

    This 240mm Sakura yanagi carries the rippled Damascus pattern of the series on a traditional single-bevel slicer. It is suited to skinning and portioning fish fillets and to slicing sashimi and nigiri toppings at the standard counter length.For skinning, lay the fillet skin-side down, hold the tail end of the skin and run the blade flat between skin and flesh. For sashimi, change to a long pull from the heel. The length handles both without a change of knife.
    For Experienced HandsSakura is a specialty line. It is more premium than our standard lines but not right for every cook, because its blue steel core is hard and its edge is very thin. A chef already comfortable with single-bevel knives will get the most from it. A cook still learning will be better served by the Take 240mm yanagiba.The Sakura 210mm yanagi is shorter and the Sakura 270mm yanagi longer. The plain-finish blue steel option at this length is the Matsu 240mm yanagiba. See the knife shapes guide for more on slicers. Learn More
  • Minonokuni Gin-San 8.3-inch (210mm) Yanagi

    A stainless yanagi that sharpens like a carbon one is the reason to choose this knife. The Gin-San 210mm slices sashimi with the long pull stroke of a traditional single-bevel blade, and it tolerates the wet conditions of a sushi station far better than carbon steel.The 210mm length suits a home board or a compact station. Start each slice at the heel and draw the blade toward you in one motion, so the fish is cut rather than pressed. The hollow back keeps the slice from sticking, and the result has the bright, smooth surface that sashimi calls for.
    Choosing Gin-sanGin-san is one of our two specialty lines. It is technically more premium than Matsu, Take or Ume, though not necessarily the best fit for every cook. It suits a cook who values low maintenance, or who slices fish in a humid kitchen. For learning on a forgiving steel, the Ume 210mm yanagiba is the better start; for the keenest carbon edge, the Matsu 210mm yanagiba.Longer Gin-San yanagi are the 240mm and 270mm. The knife shapes guide explains how the yanagi compares with other slicers. Learn More
  • Minonokuni Gin-San 9.4-inch (240mm) Yanagi

    The 240mm Gin-San yanagi brings the standard sushi counter length to a stainless steel that a cook can maintain like carbon steel. It slices a full saku of tuna or a salmon fillet in a single draw and shrugs off the constant moisture of fish work.Gin-san is a stainless steel that can be hammer-forged in the traditional way and ground to a single bevel. That combination is unusual. Most stainless steels are hard to forge and sharpen this way, which is why most traditional yanagi are carbon steel. Here, the cook gets a keen, easily sharpened edge without needing to dry the blade after every slice.
    Specialty, Not DefaultWe place Gin-san among our specialty lines. It is more premium than the standard lines, but a cook who already maintains carbon knives without trouble may prefer the Take 240mm yanagiba in white steel. Gin-san is the better match for a kitchen where knives may stay wet, or for a cook who would rather spend less time on care.For a shorter knife, see the Gin-San 210mm yanagi; for more reach, the Gin-San 270mm yanagi. The guide to knife shapes covers the yanagi. Learn More

Items 21 to 30 of 49 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5