You have no items in your shopping cart.
Yanagi / Sujihiki
One of the traditional Japanese shapes, Yanagi knives are similar to carvers in appearance but can be distinguished by their long thick spines, prominent shinogi lines, and concave back sides. The westernized version of this form is known as Sujihiki. Flat ground and never more than 3mm in width, Sujihiki knives have long, thin, pointed blades that are very comparable to carving knives in both appearance and application.
Sujihikis (also known as Sujibikis) are commonly made in both carbon and stainless steels. Yanagis (also known as Yanagibas) are more commonly made in Carbon Steel. We do have a selection of Stainless Steel Yanagis as well. You can browse our selection of Stainless Steel Yanagis here.
-
Minonokuni Matsu 10.6-inch (270mm) Yanagiba
At 270mm, this yanagiba suits a cook who slices large blocks of fish in volume, such as a full saku of bluefin or a wide side of salmon. The extra length over a 240mm lets each slice finish in one stroke even when the fish is broad, so fewer slices need a second pass.The longer blade asks more of the cook. It needs room on the board and a steady wrist to keep the tip from wandering. For that reason, we suggest it for professionals and experienced home sushi cooks, the same people who will appreciate the blue steel edge. A hard, thin edge like this one keeps its bite through a long service, but it is less forgiving of a twist than the white steel of the Take 270mm yanagiba.
Where the 270mm FitsThe Matsu yanagiba comes in four lengths. The 240mm is the standard counter length, while the 300mm gives the longest stroke for large fish and a wide board. Between them, the 270mm adds reach without the weight of the longest knife. The guide to Japanese and Western knife shapes covers the yanagiba in more detail.Every Matsu knife is forged by hand, and small hammer marks and color variation in the iron are normal. Learn More$355.00 -
Minonokuni Matsu 11.8-inch (300mm) Yanagi
The 300mm yanagi is a sushi counter knife. Its length lets the chef slice a large block of fish, or a wide fillet of salmon, in a single long draw from heel to tip, so each slice keeps a smooth face and holds its shape on the plate.A knife this long needs space. It works best on a deep board with room to the side, and it rewards a practiced, relaxed stroke over force. We recommend it for experienced cooks, both because of the length and because of the steel. Matsu knives are forged from blue steel, which holds the keenest edge in the three standard Minonokuni lines but is also the most brittle. A cook who already sharpens single-bevel knives will keep it in good order.
Choosing a Yanagi LengthThe Matsu 240mm yanagiba is the standard counter length, and the Matsu 270mm is a step up in reach. Choose the 300mm when the fish and the board are large and the work is mostly slicing. For a 300mm yanagi in a less demanding steel, see the Take 300mm yanagiba.The knife shapes guide explains how the yanagi is used with the deba and usuba. Learn More$400.00 -
Minonokuni Sakura Damascus 10.6-inch (270mm) Yanagi
The 270mm Sakura yanagi gives a long, even stroke for slicing sashimi from broad blocks of fish, and its Damascus jacket makes it as much a statement as a tool. The length completes each slice in one pass, which preserves texture and presentation.A long yanagi rewards a relaxed grip and an unhurried draw. Let the weight of the blade carry it through the fish and the edge do the cutting. On a deep board with room to the side, the length lets the cook set the thickness of each slice precisely.
Choosing a 270mm YanagiSakura is one of our specialty lines, technically more premium than the standard lines but not the right choice for everyone. Its blue steel core is hard and delicate, so it belongs with an experienced sushi cook. For the same length in a less brittle steel, see the Take 270mm yanagiba. For a stainless option, see the Gin-San 270mm yanagi.The Sakura 240mm yanagi is the standard counter length. Our guide to kitchen knife shapes covers the yanagi. Learn More$648.00 -
Minonokuni Gin-San 10.6-inch (270mm) Yanagi
The longest Gin-San yanagi is meant for cooks who slice wide blocks of fish for a dining room and want a blade that will not rust between orders. At 270mm, it finishes a slice of salmon or tuna in one long stroke, with length to spare on broader fish.The knife is hand-forged by Minonokuni craftsmen in the kasumi method, with the hard Gin-san edge steel jacketed in a softer stainless steel. That softer jacket is what makes it practical to hammer such a hard steel into a traditional single-bevel blade, and it also makes the knife easier to sharpen than a solid hard blade.
Where It FitsGin-san is a specialty line, technically more premium than Matsu, Take or Ume, but not the right choice for everyone. A long blade asks for a steady hand and room on the board. A cook who wants this length in carbon steel can compare the Take 270mm yanagiba or the Matsu 270mm yanagiba.Shorter Gin-San yanagi are the 210mm and 240mm. For more on the yanagi, see our kitchen knife shapes guide. Learn More -
Minonokuni Take 10.6-inch (270mm) Yanagiba
Slicing fish for a full dining room calls for a longer knife, and the 270mm yanagiba adds that length without moving to the largest sizes. A wide block of fish can be sliced from heel to tip in one smooth draw, which keeps the surface of each piece glossy and intact.The added length also means added weight toward the tip. Let that weight carry the blade through the fish, and keep the grip relaxed. A cook used to a 240mm will need a few sessions to adjust to the longer stroke.
The Take LineTake uses white steel, a fine-grained carbon steel that sharpens quickly and holds an edge well in a working kitchen. It is less brittle than the blue steel Matsu 270mm yanagiba, and so suits cooks who are confident with sushi but not yet experts at maintaining a single-bevel edge.Shorter and longer options are the Take 240mm and Take 300mm. Left-handed cooks can order the Take 270mm left-handed yanagi. For more on slicers, see the knife shapes guide. Learn More$220.00 -
Minonokuni Take 10.6-inch (270mm) Left-Handed Yanagi
A left-handed sushi chef who needs a longer slicer can choose this Take 270mm yanagi, which we stock. The blade is ground for the left hand, with the bevel on the left face and the hollow back on the right.The long, weighted blade should glide through the fish under its own weight while the thin edge makes the cut. Draw from heel to tip in a single stroke. Pressing down or sawing will crush the flesh and spoil the surface of the slice.
Take for Left-Handed CooksTake is the sweet spot of the Minonokuni range. Its white steel is ready for professional work and less brittle than blue steel, so it is a good choice for a left-handed cook who has some experience but is not yet an expert with single-bevel knives. A cook who would rather learn on the most forgiving steel can choose the Ume 270mm left-handed yanagi.The Take 240mm left-handed yanagi is shorter and easier on a home board. The right-handed version is the Take 270mm yanagiba. The knife shapes guide explains the yanagi. Learn More -
Minonokuni Take 13-inch (330mm) Yanagi
The 330mm is the longest yanagi Minonokuni makes in the Take line. It is a specialist’s knife for large fish, such as whole loins of tuna and wide sides of salmon, where even a 300mm blade would need a second stroke to finish the slice.The length gives a long, slow stroke, and the cook controls the thickness of each slice through the angle of the blade. On a board of ordinary depth, it can be unwieldy, so we suggest it for a sushi counter or a kitchen that slices large fish daily.
Why TakeThe Take line uses white steel. It is good enough for professional use and less brittle than blue steel, and on a blade this long, a little extra tolerance in the edge is worth having. White steel also returns to a keen edge quickly on a waterstone, which shortens the time spent maintaining a long single bevel.For a more manageable length, see the Take 300mm yanagiba or the Take 240mm yanagiba. The knife shapes guide covers the yanagi and other slicers.As with every Take knife, the blade is forged and finished by hand, and minor marks from that work are a normal part of the knife. Learn More$300.00 -
Minonokuni Ume 10.6-inch (270mm) Yanagiba
A 270mm yanagiba gives a long, even stroke for slicing wide blocks of fish, and the Ume line puts that length in a steel that forgives errors and sharpens easily. It suits a cook moving into restaurant sushi work who wants a longer knife before investing in a harder steel.The long blade has enough weight to glide through the fish while the thin edge makes the cut. Draw it toward you with a relaxed grip and let the length do the work. Pushing down or sawing crushes the fish and dulls the surface of the slice.
Moving Up in LengthThe extra length over the Ume 240mm yanagiba takes practice to control, especially at the tip. A forgiving steel makes that practice less costly, which is why we suggest Ume for a cook building skills. For the same length in harder steel, see the Take 270mm yanagiba.The Ume 300mm yanagiba is the longest in the line. Left-handed cooks can order the Ume 270mm left-handed yanagi. The shapes guide describes how the yanagiba is used. Learn More -
Minonokuni Ume 10.6-inch (270mm) Left-Handed Yanagi
This 270mm yanagi is ground as a true left-handed knife, with the bevel forged and finished on the left side of the blade. A left-handed sushi cook gets the straight, flat slice the shape is designed for, without fighting a blade that steers the wrong way.The 270mm length handles wide blocks of tuna and full salmon fillets in a single stroke. It needs a deeper board than the shorter sizes and a little practice to control the tip, but it rewards a smooth, unhurried draw with clean slices.
Left-Handed and LearningUme is the most forgiving of our three standard lines and the best one on which to learn to sharpen. A left-handed cook who is moving to a longer knife while still developing technique will find the softer carbon steel more tolerant. We keep this knife in stock. The Take 270mm left-handed yanagi is the white steel option for a harder edge.The Ume 240mm left-handed yanagi is shorter. The right-handed model is the Ume 270mm yanagiba. See the knife shapes guide for more on slicers. Learn More -
Minonokuni Ume 11.8-inch (300mm) Yanagiba
The 300mm Ume yanagiba is a long sushi counter knife in the most forgiving steel Minonokuni offers. Its length slices large blocks of fish in one stroke, and it holds its edge through a long session of slicing.A blade this long gives the cook fine control over the thickness and angle of each slice, which matters for thin cuts of white fish and for presentation. It needs space, though, and a cook stepping up from a shorter yanagiba should expect to practice keeping the tip steady.
Why a Forgiving Steel at This LengthA long single bevel takes time to sharpen evenly from heel to tip. Ume’s steel is the easiest of our three standard lines to sharpen and the least likely to chip, so a cook still learning to maintain a long edge will find it more tolerant. When the time comes for a harder edge, the Take 300mm yanagiba and Matsu 300mm yanagi use white and blue steel.For a shorter knife, see the Ume 270mm yanagiba. The knife shapes guide explains the yanagiba. Learn More
