Sharpening Stones

Engineered Precision: The Definitive Solution for Perfectly Flat Sharpening Stones Stop compensating for 'dished' surfaces. Master your knife edges by ensuring your sharpening foundation is perfectly level with Pride Abrasives’ professional-grade 120/320 dual-grit technology. A sharpening stone is only as good as its surface. Over time, even the highest quality waterstones develop a concave 'dish' in the center from repeated use. If you continue to sharpen on a non-level surface, you compromise the geometry of your blade, leading to inconsistent bevels and duller edges. The Pride Abrasives Large Combination Flattening Stone is specifically engineered to solve this problem for professional chefs, woodworkers, and knife enthusiasts. Crafted with Pride Abrasives' legendary attention to particulate consistency, this substantial stone features a dual-grit configuration that handles the entire restoration process. The 120-grit side is designed for aggressive material removal, allowing you to quickly grind away the high shoulders of a badly worn stone. Once level, the 320-grit side provides a refined surface finish, ensuring your sharpening stones are ready to deliver a razor edge without deep scratches. This is not just a maintenance tool; it is an investment in the longevity of your entire cutlery collection and the accuracy of your sharpening craft. Learn More

Pride Abrasive 3000/8000 Grit Combination Waterstone is made in Bristol, Wisconsin using the finest available ingredients, this is done so that the stone will last without constant re-flattening and that the abrasive content is high enough in the stone to move hardened steel. The 3000 grit is a maintenance stone for daily touch ups to otherwise fairly sharp knives. The 8000 grit will smooth and refine the work done by the 3000, however the 8000 grit will begin to polish the steel this is necessary for the cutting of protein. Made In USA. Learn More

Pride Abrasives Water Stone Set comes with three grit varieties.
The 1,000 grit cuts fast and should be used on dull knifes to establish an edge (form a burr).
The 3,000 Grit is ideal for edge maintenance, the edge will be refined and suited for vegetables coming off of this grit but not polished, (for meat and fish).
The 6,000 grit water stone can be used to further refine and maintain already sharp knives, it can be used to smooth/ remove the wired edge and it will polish your knives for a longer lasting edge.
Water Stones need water and slurry to work properly. Ensure that your stone is fully soaked through before use. Immerse in water, wait for bubbles to stop, low grit stones need more water. Made in USA. Learn More

Pride Abrasives 1000 grit Waterstone (cream) 14 microns. Made in the USA. Pride stones use a unique vitrification process on the Aluminum Oxide, ensuring these stones form a burr quicker and stay flatter longer. Use this 1000 grit stone for general knife maintenance and to bring the edges together to form a burr. Learn More

The Pride Abrasive combination waterstone features a 1000 grit and a 3000 grit which are bonded together to give to buyer the most important two stones in one purchase. The 1000 Grit stone is used on dull knives to put a new edge (bevel) on the knife this grit will leave a toothy, or jagged, edge that needs to be smoothed a refined with the 3000 Stone. These two stones can effectively sharpen a knife but if you are going to cut protein a higher grit may be desired. Comes in a wooden presentation box.

Made in USA.

Dimensions: 8"x3"x1"
Learn More

Pride Abrasive 1000/6000 Grit Combination Stone made in USA using the highest quality ingredients. The 1000 Grit is one of the best stones on the market today to set bevels and develop a burr on most high end kitchen knives. The 6000 will smooth and refine the work done on the 1000 grit. A proficient sharpener might be able to the the whole sharpening processes with the one stone, if your knife has damage more stones may be required. Made In USA. Learn More

Pride Abrasive 120 Grit Flattening Stone for flattening (lapping) sharpening stones. Can be used on Ceramic stones, however best used in conjunction with Pride Abrasive water stones. Made in USA. Learn More

Pride Abrasive 220 grit Waterstone (Tan).
This 220 Grit Waterstone is the roughest of Pride's waterstones, this course stone is ideal for fixing small chips or broken tips on knives, or to set a bevel in the initial stages of sharpening. Be sure not to over sharpen on this stone, use your fingers to feel for a burr while sharpening to know when to move to a higher grit.

Made in the USA.

Dimensions: 8"x3"x1"
Learn More

Pride Abrasive 220/1000 Grit Combination Stone. This stone is intended for the serious sharpener. The high abrasive in the 220 grit will make very short work of dull or damaged knives (be careful not to oversharpen on the 220). The 1,000 can be used to smooth and refine the work of the 220 and to set a beveled edge. The finished edge on the 1,000 may be suitable for vegetable cutting but generally the sharpener should finish on a higher stone than the 1,000. Learn More