Sharpening Stones

Pride Abrasives 1000 grit Waterstone (cream) 14 microns. Made in the USA. Pride stones use a unique vitrification process on the Aluminum Oxide, ensuring these stones form a burr quicker and stay flatter longer. Use this 1000 grit stone for general knife maintenance and to bring the edges together to form a burr. Learn More

The Hardest Working Foundation for Every Professional Edge When maintaining a professional kitchen or workshop, the 1000 grit stone is your most critical asset. It is the workhorse of the sharpening station, responsible for the heavy lifting of edge restoration and geometry correction. The RH Preyda 1000 Grit Arkansas Waterstone represents a Tier-1 upgrade over standard synthetic stones by utilizing 100% natural Novaculite. Found exclusively in the Ouachita Mountains of Arkansas, this rare geological formation provides a unique combination of high abrasiveness and incredible structural hardness. Why Natural Novaculite Trumps Synthetic Most synthetic stones on the market use aluminum oxide or silicon carbide, which can 'dish' or hollow out quickly under heavy use, requiring constant flattening with a diamond plate. The natural density of the RH Preyda Novaculite ensures your stone stays true significantly longer. This translates to more consistent angles across the entire length of your blade and a 'quicker dull-to-sharp' process that respects your time. Expert Application Insight While ultra-fine stones provide the mirror polish, the 1000 grit is the mandatory first step for any knife that has lost its daily utility edge. This stone is designed for those who demand efficiency and precision. It provides the 'bite' necessary to reset a bevel before transitioning to finishing stones. Measuring a generous 8″ x 3″ x 1″, this massive surface area provides the stability needed to accommodate everything from delicate paring knives to heavy 10-inch chef’s knives and cleavers. Crafted in the U.S.A., it includes a custom-fit silicone non-slip base, ensuring that even under the pressure of professional sharpening, your stone remains exactly where you need it. Learn More

The Naniwa (Lobster Brand) 1000 grit waterstone is the most commonly used grit waterstone. This stone is intended for daily maintenance and establishing an edge on a dull knife. Needs to be soaked in water (usually until the bubbles stop) before use. Learn More

Pride Abrasives Water Stone Set comes with three grit varieties.
The 1,000 grit cuts fast and should be used on dull knifes to establish an edge (form a burr).
The 3,000 Grit is ideal for edge maintenance, the edge will be refined and suited for vegetables coming off of this grit but not polished, (for meat and fish).
The 6,000 grit water stone can be used to further refine and maintain already sharp knives, it can be used to smooth/ remove the wired edge and it will polish your knives for a longer lasting edge.
Water Stones need water and slurry to work properly. Ensure that your stone is fully soaked through before use. Immerse in water, wait for bubbles to stop, low grit stones need more water. Made in USA. Learn More

Achieve a Sharp Edge with the Masahiro 1500 Grit Waterstone The 1500 grit surface is perfectly suited for routine maintenance, allowing you to quickly touch up and restore the keenness of your knives without excessive metal removal.  This Masahiro waterstone comes permanently attached to a sturdy, non-slip stand. The stone thickness of one inch is larger than most stones and creates excellent longevity. For most kitchen uses, 1500 grit is all that is needed for a slightly toothy edge that excels on products like tomatoes and waxed vegetables.  If a fine polish is desired for use on proteins, we recommend finishing on the Masahiro 3000 grit stone. Soak the stone in water before use to ensure optimal performance. For best results and to maintain a flat sharpening surface, it is also advisable to use a flattening stone as needed. Learn More

The Norton Complete Waterstone Set comes with 4 full sized (8x3x1 in) stones in 220, 1000, 4000, and 8000 grit. Each stone comes in its own storage case that doubles as a stone holder. This complete set includes every grit needed for the home or professional sharpener. Learn More

Norton 8x3x1 inch, full size 4000 grit waterstone is used to polish and refine the edge of an already sharp knife. Generally used to remove grind marks left behind from coarser grits used in initial stages of sharpening. Learn More

- Dimensions: 9 in. x 3 in. x 3/4 in.
- Coarse grit silicon carbide stone.
- Superbly flat with hard bond.
- Promotes maximum cutting for all grit sizes of water stones.
- Provides swarf removal.
- Produces extremely flat results on all water stones, ceramic or traditional. Soak the flattener in water for at least 10 minutes prior to use. Learn More

Norton 220 grit Waterstone is 8x3x1 inch Waterstones are for experienced sharpeners. A stone in this grit range is used for tip repair, chip removal and blade thinning. Learn More