You have no items in your shopping cart.
Sharpening Stones
-
Minonokuni 220 Grit Waterstone
A 220 grit stone is for repair rather than routine sharpening. It is the stone to reach for when a knife has a chipped edge, a broken tip, a dip worn into the edge (a reverse curve) or a bevel that needs to be reset, jobs that would take far too long on a medium stone.Because it is aggressive, it removes steel quickly. Work with light, even pressure and check the edge by eye at short intervals, then move to a finer stone as soon as the damage is gone. Every scratch the 220 leaves has to be removed by the next stone, so stopping early saves time overall.
Building a SetA coarse stone is the first of three steps in a Japanese sharpening setup. After the 220, the Minonokuni 1000 grit waterstone restores a working edge, and the Minonokuni 4000 grit waterstone refines and polishes it. A cook whose knives are in good condition can start with the 1000 and add the 220 only when an edge needs repair.This stone needs a fair amount of water, so give it a full soak before use and keep the surface wet as you work. For single-bevel knives such as the Take 240mm yanagiba, use the 220 on the beveled face only, never on the flat back. Learn More -
Naniwa 220 grit Pink Alumina Flattening Stone
A flattening stone, designed to restore the flat surface of sharpening stones. Over time, sharpening stones develop low spots from repeated use—this tool helps grind them back to a perfectly even surface for optimal sharpening performance. Learn More$35.95 -
Naniwa Lobster 220 Grit Waterstone
The Naniwa (Lobster Brand) 220 Grit waterstone is an aggressive stone with a fair amount of bite. This stone is best used on knives that are very dull, damaged or have issues like a missing tip. The course texture will allow the user to create a new bevel in their blade with ease. These are porous stones so be sure to let them soak up the water until the bubbles cease. Made in Vietnam.
Dimensions:
210mm X 65mm X 30mm
8.27" X 2.56" X 1.18" Learn More$30.95 -
Pride Abrasives 220 Grit Waterstone
Pride Abrasive 220 grit Waterstone (Tan).
This 220 Grit Waterstone is the roughest of Pride's waterstones, this course stone is ideal for fixing small chips or broken tips on knives, or to set a bevel in the initial stages of sharpening. Be sure not to over sharpen on this stone, use your fingers to feel for a burr while sharpening to know when to move to a higher grit.
Made in the USA.
Dimensions: 8"x3"x1" Learn More$48.95 -
Minonokuni Sharpening Stone Set
This is the Minonokuni 3 piece sharpening stone bundle. These are fantastic stones for any sharpener due to their quality and sharpening properties.
Items Included: 220 Grit - Great for very dull or damaged knives. Use this stone to form a burr and set a bevel.
1000 Grit - Maintenance stone for touching up dull knives. Frequently used to refine or continuing to establish the bevel and form a burr.
4000 Grit - The finest grit stone in this set. Intended to polish the marks left from the previous stones so the knife's edge is as smooth as possible. Ideal for cutting fish and meat.
Made in: Japan Learn More
