You have no items in your shopping cart.
Steel Sharpening Rods
Maintain peak performance and extend the life of your kitchen knives with our high‑quality steel sharpening rods. Essential for honing blades between full stone sharpenings, these rods keep edges aligned and knives performing at their best. We carry a large variety of premium rods in specialized cuts, shapes, and lengths to suit every knife and steel type. Durable and easy to use, they are perfect for home cooks and professional chefs alike, helping you achieve smooth, precise cuts every time.
-
Victorinox 10-inch Regular Cut Honing Steel, Dark Wood Handle
Unlike a sharpening stone, which removes metal to create a new edge, this Victorinox regular cut steel realigns the existing edge of a knife after it rolls over in use. The 10-inch rod gives room for long strokes on knives from a paring knife up to an 8-inch chef’s knife.The dark wood handle has a guard between the hand and the rod and gives a classic look in a knife block or on a hook. The steel is made in the United Kingdom.Hone before each use with light strokes on alternate sides. The regular cut works well on Victorinox knives such as the Hardwood 8-inch Chef’s Knife, whose steel responds quickly to honing.Steel this length also hangs well on a hook at the station, where it is in reach for a few strokes between tasks.For more length with the same handle, see the Victorinox 12-inch Fine Cut Honing Steel. Our Honing Rod Guide explains each cut. Learn More$32.40 -
Granton 10 in. Packing House Steel
Often referred to as a butcher's steel or packing house steel, the Granton® 10-Inch Magnetized Polishing Steel is the industry standard for professionals who rely on a perfect edge, shift after shift. Forged in Sheffield, England, this is not a simple honing rod; it is a precision finishing tool designed for the high-demand environments of meat processing, where safety, hygiene, and efficiency are paramount. The Professional's Choice: The Packing House Standard Meat packers and professional butchers choose this specific type of steel for several critical reasons: Essential Food Safety: In a commercial facility, hygiene is non-negotiable. As a knife is steeled, it sheds microscopic metal particles. The powerful magnetization of the Granton® steel instantly captures these filings, preventing them from contaminating meat or becoming airborne. Peak Efficiency and Reduced Fatigue: A polished edge glides through meat with significantly less friction than a merely honed edge. For a worker making thousands of cuts per day, this reduction in effort leads to faster work, cleaner cuts, and less physical fatigue. Superior, Longer-Lasting Edge: The super-fine polishing surface removes the microscopic "burr" left after sharpening, burnishing the steel to a flawlessly smooth, razor-keen edge that stays sharp longer under continuous use. Learn More$22.40 -
Shun 9-inch Combination Honing Steel, Steel-Grey Handle
Shun’s 9-inch combination honing steel keeps knife edges aligned with two surfaces in one rod, a smooth side for regular honing and a micro-ribbed side for more thorough realignment. A built-in angle guide sets the blade at 16°, so even a cook new to honing holds the correct angle.Its steel-grey handle suits any Shun series, which makes it the honing steel to choose for a mixed collection of Shun knives.
Classic Handle OptionThe Shun Classic Combination Honing Steel has an ebony Pakkawood handle. Learn More$59.95 -
Zwilling Bob Kramer Double-Cut Sharpening Steel
Zwilling has discontinued production of all Bob Kramer products. This was a highly rated honing rod by America’s Test Kitchen, but we offer similar, if not better, substitute rods that combine fine-cut and smooth surfaces.See the Friedr. Dick combination rods, the F. Dick 10-inch square combination steel and the F. Dick Dickoron 12-inch round combination steel, and the Victorinox combination rods, the Victorinox 10-inch combination steel and the Victorinox 12-inch combination steel. Learn More -
Wüsthof 10-inch Deluxe Honing Steel
Wüsthof’s 10-inch deluxe honing steel is a full-length steel for keeping the knives in your block in line. We recommend a steel at least 1 inch longer than your longest knife, so this 10-inch steel suits knives up to 9 inches, and it fits any Wüsthof block. Regular honing pushes the edge of a blade back to center after it bends slightly in use, and the knife feels sharp again without removing steel.Before you start cooking, give each side of the blade a few light passes down the rod. The longer rod gives a full sweep for long blades, and the handle is heavy enough to hold steady in one hand. German and American steel knives need regular honing to perform their best. This steel is designed to pair with Wüsthof knives, and it can be used on knives of any brand.Honing is maintenance; once a few strokes stop bringing the edge back, it is time to sharpen. The Wüsthof 10-inch ceramic sharpening rod removes a small amount of metal for knives that have gone dull, and the two-stage hand-held sharpener resets a worn edge. For a lighter steel, see the 10-inch honing steel with loop, and read our Honing Rod Guide for the steps. Learn More$84.95 -
Wüsthof Classic Ikon 10-inch Honing Steel
Styled after the knives it serves, this Wüsthof Classic Ikon 10-inch honing steel matches their look and keeps their edges aligned between sharpenings. A few light strokes per side before cooking push the edge of the blade back to center, and the knife cuts cleanly again.The 10-inch rod covers every knife in a Classic Ikon block, from the paring knife to the 9-inch chef’s knife and the bread knife. The handle carries the same contour and riveted styling as the knives, so it sits naturally in the steel slot of a block set.For a knife that has gone dull, sharpen with the Wüsthof 10-inch ceramic sharpening rod or the two-stage hand-held sharpener. It is the steel included in the Classic Ikon 8-piece knife block set. For the Ikon blackwood line, see the Ikon 10-inch honing steel; the Knife Merchant honing steel guide shows the motion step by step. Learn More$179.95 -
Victorinox 12-inch Combination Cut Honing Steel
The Victorinox 12-inch combination steel has two sides grooved as a fine cut and two smooth sides for use as a polishing rod. Polishing rods are used by butchers who want to keep a razor edge.We recommend a couple of strokes on the fine side, top and bottom of the blade, then rotating the steel 90 degrees and finishing on the polishing side for a smooth, mirror-finish edge.The 12-inch rod covers knives up to 10 inches, such as the Fibrox Pro 10-inch Butcher Knife, so the whole edge meets the steel on every stroke. It is made in Sheffield, England, with a plastic handle and a ring for hanging.Wipe the rod after use and hang it by its ring.For a shorter rod, see the Victorinox 10-inch Combination Steel. For a polishing surface alone, the Victorinox 10-inch Round Polish Steel. Our Honing Rod Guide explains each cut. Learn More$33.20 -
Victorinox 10-inch Round Polish Steel
A polishing steel has a very smooth surface that burnishes an edge instead of abrading it. This 10-inch Victorinox round polish steel suits frequent, gentle maintenance of butcher knives, keeping a keen edge with very little wear on the blade.Butchers trimming fat caps and slicing portions need an extremely sharp knife, and a polishing rod is an appropriate way to keep it there. It pairs well with the Fibrox Pro 10-inch Butcher Knife and other trimming knives.Use light, quick strokes on alternate sides throughout the work. When polishing no longer restores the edge, a fine cut steel or a stone is the next step.Keep the smooth surface clean and free of grit, and wipe it dry after each use.For a fine cut and a polish on one rod, see the Victorinox 10-inch Combination Steel. The F. Dick 10-inch non-chromium polishing steel is another polishing option. Our Honing Rod Guide explains polishing steels. Learn More$32.40 -
Victorinox 10-inch Combination Cut Honing Steel
The Victorinox 10-inch combination steel has two sides grooved as a fine cut and two smooth sides for use as a polishing rod. Polishing rods are used by butchers who want to keep a razor edge.We recommend a couple of strokes on the fine side, top and bottom of the blade, then rotating the steel 90 degrees and finishing on the polishing side for a smooth, mirror-finish edge.It is made in Sheffield, England, with a plastic handle and a ring for hanging, and the 10-inch steel fits nicely into a standard knife block. It suits knives up to 8 inches, such as the Fibrox Pro 8-inch Butcher and Fishing Knife.Wipe the rod clean after use. The polishing faces stay smooth only if they are kept free of grit, so store the steel where it will not knock against other tools.For more length, see the Victorinox 12-inch Combination Steel. Our Honing Rod Guide explains polishing steels. Learn More$32.40 -
Victorinox 7-inch Regular Cut Honing Steel
The Victorinox 7-inch regular cut steel is built for poultry processors and is ideal for boning knives and other small knives. The compact rod fits in a belt holder or a tackle box, so the edge can be touched up on the line or in the field.Poultry and game work dulls a boning knife quickly, and a few strokes on this steel between birds keep it cutting cleanly. It suits knives up to about 5 inches, such as the Fibrox Pro 5-inch Curved Semi-Stiff Boning Knife.Hold the steel in the free hand, set the heel of the knife at the top and draw it down the rod, alternating sides. Keep the strokes light and short.Wipe it clean between birds and dry it at the end of the shift.For longer knives, see the Victorinox 10-inch Regular Cut Honing Steel. Our Honing Rod Guide explains honing in detail. Learn More$19.30
