You have no items in your shopping cart.
Steel Sharpening Rods
Maintain peak performance and extend the life of your kitchen knives with our high‑quality steel sharpening rods. Essential for honing blades between full stone sharpenings, these rods keep edges aligned and knives performing at their best. We carry a large variety of premium rods in specialized cuts, shapes, and lengths to suit every knife and steel type. Durable and easy to use, they are perfect for home cooks and professional chefs alike, helping you achieve smooth, precise cuts every time.
-
Victorinox 10-inch Regular Cut Honing Steel, Dark Wood Handle
Unlike a sharpening stone, which removes metal to create a new edge, this Victorinox regular cut steel realigns the existing edge of a knife after it rolls over in use. The 10-inch rod gives room for long strokes on knives from a paring knife up to an 8-inch chef’s knife.The dark wood handle has a guard between the hand and the rod and gives a classic look in a knife block or on a hook. The steel is made in the United Kingdom.Hone before each use with light strokes on alternate sides. The regular cut works well on Victorinox knives such as the Hardwood 8-inch Chef’s Knife, whose steel responds quickly to honing.Steel this length also hangs well on a hook at the station, where it is in reach for a few strokes between tasks.For more length with the same handle, see the Victorinox 12-inch Fine Cut Honing Steel. Our Honing Rod Guide explains each cut. Learn More$32.40 -
Wüsthof 10-inch Deluxe Honing Steel
Wüsthof’s 10-inch deluxe honing steel is a full-length steel for keeping the knives in your block in line. We recommend a steel at least 1 inch longer than your longest knife, so this 10-inch steel suits knives up to 9 inches, and it fits any Wüsthof block. Regular honing pushes the edge of a blade back to center after it bends slightly in use, and the knife feels sharp again without removing steel.Before you start cooking, give each side of the blade a few light passes down the rod. The longer rod gives a full sweep for long blades, and the handle is heavy enough to hold steady in one hand. German and American steel knives need regular honing to perform their best. This steel is designed to pair with Wüsthof knives, and it can be used on knives of any brand.Honing is maintenance; once a few strokes stop bringing the edge back, it is time to sharpen. The Wüsthof 10-inch ceramic sharpening rod removes a small amount of metal for knives that have gone dull, and the two-stage hand-held sharpener resets a worn edge. For a lighter steel, see the 10-inch honing steel with loop, and read our Honing Rod Guide for the steps. Learn More$84.95 -
Victorinox 10-inch Regular Cut Honing Steel
The Victorinox 10-inch regular cut steel is commonly mistaken for a knife sharpener. A honing steel maintains a knife’s edge and improves its cutting ability by pushing the rolled edge back into line, so the knife keeps cutting cleanly between sharpenings.We recommend a honing steel or rod about 2 inches longer than your longest knife for easier use. A 10-inch steel suits kitchens whose longest blade is an 8-inch chef’s knife, such as the Fibrox Pro 8-inch Chef’s Knife, and it fits a standard knife block.A regular cut has fine lengthwise grooves that realign the edge with a few light strokes. Use it before each prep session, and sharpen on a stone when honing no longer brings the edge back.For a finer surface, see the Victorinox 12-inch Fine Cut Honing Steel. The Victorinox 12-inch Regular Cut Honing Steel is the longer version. Our Honing Rod Guide explains honing in detail. Learn More$32.40 -
F. Dick 10-inch Round Regular Cut Steel with Non-Slip Handle
A non-slip handle matters when the hands are wet or greasy, and this 10-inch round F. Dick steel pairs one with a regular cut for everyday honing. It suits meat cutters and cooks who hone throughout a shift.F. Dick cuts the grooves deep and even, so the rod hones consistently and keeps its bite with use. The handle is sealed to the rod, which keeps it suitable for processing plants and busy kitchens with strict cleaning routines. Ten inches fits a standard knife block and suits boning, utility and chef’s knives up to about 8 inches.Keep it within reach of the cutting board so a few strokes between tasks become part of the routine.For longer knives, the 12-inch and 14-inch versions add reach. An oval rod with the same handle is the 12-inch oval regular cut steel with non-slip handle. For a finer finish, see the FineCut 10-inch oval steel. Learn More$38.35 -
F. Dick Red Spirit 10-inch Round Regular Cut Steel
With its red handle, this 10-inch round steel completes the Red Spirit knife series and keeps those knives honed with a standard cut. Knives need regular attention on a steel to stay truly sharp, and this rod makes that part of the routine.The round shape is symmetrical in the hand and guides the knife in a smooth, even stroke. The handle holds firm in a wet hand. Ten inches is long enough for the Red Spirit chef’s knife and the AJAX, and it suits the series’ paring and boning knives too.Keep it by the board so a few strokes before each task become a habit, and the Red Spirit edge will stay keen between sharpenings.Pair it with the Red Spirit 8.5-inch chef’s knife or the Red Spirit Pit Master BBQ set. For the 10-inch Hektor scimitar, a longer rod such as the F. Dick 12-inch round steel with non-slip handle gives more room. Learn More$70.85 -
F. Dick 10-inch Round Regular Cut Butcher Steel
This 10-inch round steel sits in the middle of F. Dick’s range, with a metal finger guard and a hang ring that the entry-level steels lack. The regular cut keeps butcher, boning and kitchen knives aligned through a day of use.The finger guard protects the hand if the edge slips and adds weight at the handle, which makes the rod feel balanced in the hand. Ten inches suits boning and utility knives as well as chef’s knives up to 8 inches. A longer rod is easier for curved blades such as a scimitar or a breaking knife, which need room to sweep the full edge.For a home cook, the 10-inch length also slips into a standard knife block, and the ring lets it hang beside the stove.For longer knives, the 12-inch and 14-inch versions of this butcher steel add reach. A step up in hardness and finish is the Dickoron Classic 12-inch round sapphire cut steel. Learn More$48.75 -
F. Dick 10-inch Round Regular Cut Steel
A 10-inch round steel is the right size for a home knife block, and this regular cut F. Dick rod keeps the edge on chef’s knives, slicers and paring knives aligned between sharpenings. It suits kitchens with mostly German and American knives.The regular cut has pronounced grooves, so a few strokes straighten a rolled edge and restore some bite to a knife that has started to slip on tomato skins. The round profile touches the edge at a single point, which gives precise control along a curved blade. Ten inches covers knives up to an 8-inch chef’s knife with room to spare.For a longer blade, the F. Dick 12-inch round butcher steel adds reach. An oval rod with a wider face is the F. Dick 12-inch oval regular cut steel. To finish with a smoother edge, step up to a fine cut such as the EuroCut 12-inch round fine cut steel. Learn More$35.75 -
F. Dick 1905 10-inch Round Regular Cut Steel
Matching the classic look of the 1905 knife series, this 10-inch round steel keeps those knives honed with a regular cut. It suits a home cook who wants the steel in the block to match the knives beside it.The regular cut realigns an edge that has rolled with use, so the knife keeps cutting cleanly and needs abrasive sharpening less frequently. Ten inches covers 1905 knives up to the 8-inch chef’s knife, with room for a full stroke. The handle and rod join without a gap, which keeps the steel easy to clean.Hang it by the stove, or keep it in the block beside the knives it serves.Pair it with the 1905 8-inch chef’s knife or the 1905 6-piece magnetic knife block set. For longer blades, a 12-inch rod such as the EuroCut 12-inch Round Regular Cut Steel adds reach, and a wood-handled steel is the F. Dick Honorary steel. Learn More$118.30
