You have no items in your shopping cart.
Steel Sharpening Rods
Maintain peak performance and extend the life of your kitchen knives with our high‑quality steel sharpening rods. Essential for honing blades between full stone sharpenings, these rods keep edges aligned and knives performing at their best. We carry a large variety of premium rods in specialized cuts, shapes, and lengths to suit every knife and steel type. Durable and easy to use, they are perfect for home cooks and professional chefs alike, helping you achieve smooth, precise cuts every time.
-
Zwilling Bob Kramer Double-Cut Sharpening Steel
Zwilling has discontinued production of all Bob Kramer products. This was a highly rated honing rod by America’s Test Kitchen, but we offer similar, if not better, substitute rods that combine fine-cut and smooth surfaces.See the Friedr. Dick combination rods, the F. Dick 10-inch square combination steel and the F. Dick Dickoron 12-inch round combination steel, and the Victorinox combination rods, the Victorinox 10-inch combination steel and the Victorinox 12-inch combination steel. Learn More -
Wüsthof 10-inch Deluxe Honing Steel
Wüsthof’s 10-inch deluxe honing steel is a full-length steel for keeping the knives in your block in line. We recommend a steel at least 1 inch longer than your longest knife, so this 10-inch steel suits knives up to 9 inches, and it fits any Wüsthof block. Regular honing pushes the edge of a blade back to center after it bends slightly in use, and the knife feels sharp again without removing steel.Before you start cooking, give each side of the blade a few light passes down the rod. The longer rod gives a full sweep for long blades, and the handle is heavy enough to hold steady in one hand. German and American steel knives need regular honing to perform their best. This steel is designed to pair with Wüsthof knives, and it can be used on knives of any brand.Honing is maintenance; once a few strokes stop bringing the edge back, it is time to sharpen. The Wüsthof 10-inch ceramic sharpening rod removes a small amount of metal for knives that have gone dull, and the two-stage hand-held sharpener resets a worn edge. For a lighter steel, see the 10-inch honing steel with loop, and read our Honing Rod Guide for the steps. Learn More$84.95 -
Wüsthof Classic Ikon 10-inch Honing Steel
Styled after the knives it serves, this Wüsthof Classic Ikon 10-inch honing steel matches their look and keeps their edges aligned between sharpenings. A few light strokes per side before cooking push the edge of the blade back to center, and the knife cuts cleanly again.The 10-inch rod covers every knife in a Classic Ikon block, from the paring knife to the 9-inch chef’s knife and the bread knife. The handle carries the same contour and riveted styling as the knives, so it sits naturally in the steel slot of a block set.For a knife that has gone dull, sharpen with the Wüsthof 10-inch ceramic sharpening rod or the two-stage hand-held sharpener. It is the steel included in the Classic Ikon 8-piece knife block set. For the Ikon blackwood line, see the Ikon 10-inch honing steel; the Knife Merchant honing steel guide shows the motion step by step. Learn More$179.95 -
Victorinox 12-inch Combination Cut Honing Steel
The Victorinox 12-inch combination steel has two sides grooved as a fine cut and two smooth sides for use as a polishing rod. Polishing rods are used by butchers who want to keep a razor edge.We recommend a couple of strokes on the fine side, top and bottom of the blade, then rotating the steel 90 degrees and finishing on the polishing side for a smooth, mirror-finish edge.The 12-inch rod covers knives up to 10 inches, such as the Fibrox Pro 10-inch Butcher Knife, so the whole edge meets the steel on every stroke. It is made in Sheffield, England, with a plastic handle and a ring for hanging.Wipe the rod after use and hang it by its ring.For a shorter rod, see the Victorinox 10-inch Combination Steel. For a polishing surface alone, the Victorinox 10-inch Round Polish Steel. Our Honing Rod Guide explains each cut. Learn More$33.20 -
Victorinox 10-inch Round Polish Steel
A polishing steel has a very smooth surface that burnishes an edge instead of abrading it. This 10-inch Victorinox round polish steel suits frequent, gentle maintenance of butcher knives, keeping a keen edge with very little wear on the blade.Butchers trimming fat caps and slicing portions need an extremely sharp knife, and a polishing rod is an appropriate way to keep it there. It pairs well with the Fibrox Pro 10-inch Butcher Knife and other trimming knives.Use light, quick strokes on alternate sides throughout the work. When polishing no longer restores the edge, a fine cut steel or a stone is the next step.Keep the smooth surface clean and free of grit, and wipe it dry after each use.For a fine cut and a polish on one rod, see the Victorinox 10-inch Combination Steel. The F. Dick 10-inch non-chromium polishing steel is another polishing option. Our Honing Rod Guide explains polishing steels. Learn More$32.40 -
Victorinox 10-inch Combination Cut Honing Steel
The Victorinox 10-inch combination steel has two sides grooved as a fine cut and two smooth sides for use as a polishing rod. Polishing rods are used by butchers who want to keep a razor edge.We recommend a couple of strokes on the fine side, top and bottom of the blade, then rotating the steel 90 degrees and finishing on the polishing side for a smooth, mirror-finish edge.It is made in Sheffield, England, with a plastic handle and a ring for hanging, and the 10-inch steel fits nicely into a standard knife block. It suits knives up to 8 inches, such as the Fibrox Pro 8-inch Butcher and Fishing Knife.Wipe the rod clean after use. The polishing faces stay smooth only if they are kept free of grit, so store the steel where it will not knock against other tools.For more length, see the Victorinox 12-inch Combination Steel. Our Honing Rod Guide explains polishing steels. Learn More$32.40 -
Victorinox 7-inch Regular Cut Honing Steel
The Victorinox 7-inch regular cut steel is built for poultry processors and is ideal for boning knives and other small knives. The compact rod fits in a belt holder or a tackle box, so the edge can be touched up on the line or in the field.Poultry and game work dulls a boning knife quickly, and a few strokes on this steel between birds keep it cutting cleanly. It suits knives up to about 5 inches, such as the Fibrox Pro 5-inch Curved Semi-Stiff Boning Knife.Hold the steel in the free hand, set the heel of the knife at the top and draw it down the rod, alternating sides. Keep the strokes light and short.Wipe it clean between birds and dry it at the end of the shift.For longer knives, see the Victorinox 10-inch Regular Cut Honing Steel. Our Honing Rod Guide explains honing in detail. Learn More$19.30 -
Victorinox 14-inch Regular Cut Honing Steel
The Victorinox 14-inch regular cut steel maintains a knife’s sharp edge when it is used regularly. A honing steel does not sharpen knives; it realigns the edge of the blade so it cuts cleanly again.The 14-inch length suits the longest knives in a meat room, such as a 12-inch scimitar or the Fibrox Pro 14-inch Slicer, where a shorter steel cannot cover the whole edge in one stroke.It is made in England. Wash it by hand and dry it before storing.Keep it on a hook at the cutting table, where it is in reach between primals. A long steel also suits a shared station, since every knife on the table fits it.Hold the steel upright with the tip on a towel and draw the knife down and toward you, alternating sides. For a finer surface at this length, see the Victorinox 14-inch Fine Cut Honing Steel. Our Honing Rod Guide compares the cuts. Learn More$37.00 -
Victorinox 12-inch Regular Cut Honing Steel, Black Handle
Over hundreds of cuts, the very edge of a knife rolls to one side and the knife stops biting into food. The Victorinox 12-inch regular cut honing steel realigns that edge with a few light strokes, restoring cutting performance without removing metal the way a sharpener does.The 12-inch rod is long enough for 10-inch chef’s knives and slicers and for butchery knives such as the Fibrox Pro 10-inch Scimitar, so the whole edge passes along the steel in one stroke.Hone before each work session, with the tip of the steel resting on a towel. Light, even strokes on alternate sides do more than heavy ones.Steel this length also hangs well on a hook at the station, where it is in reach for a few strokes between tasks.For a finer surface at this length, see the Victorinox 12-inch Fine Cut Honing Steel. The Victorinox 12-inch Combination Steel adds a polishing face. Our Honing Rod Guide explains each cut. Learn More$34.15 -
Victorinox 10-inch Regular Cut Honing Steel
The Victorinox 10-inch regular cut steel is commonly mistaken for a knife sharpener. A honing steel maintains a knife’s edge and improves its cutting ability by pushing the rolled edge back into line, so the knife keeps cutting cleanly between sharpenings.We recommend a honing steel or rod about 2 inches longer than your longest knife for easier use. A 10-inch steel suits kitchens whose longest blade is an 8-inch chef’s knife, such as the Fibrox Pro 8-inch Chef’s Knife, and it fits a standard knife block.A regular cut has fine lengthwise grooves that realign the edge with a few light strokes. Use it before each prep session, and sharpen on a stone when honing no longer brings the edge back.For a finer surface, see the Victorinox 12-inch Fine Cut Honing Steel. The Victorinox 12-inch Regular Cut Honing Steel is the longer version. Our Honing Rod Guide explains honing in detail. Learn More$32.40
